Epoxy Masterclass | We Got This Recipe on Lockdown | Stone Coat Epoxy

[@dennisstaehnke293]

Black Carmel marble for the big one. God be with you Chris

[@hadbetterdayz2012]

That's that Siberian long tiger... I've been watching your videos for about a year now and I just bought a house with my new wife that's 3700 sq ft. Every countertop,, fireplace hearth and surface including the floors will be Stone Coat. I've been doing residential maintenance and painting for over 30 years.. depending on my finished product in my own home. I may start doing it as contract work. You are a great teacher after watching you so long I'm sure I'm just as good as you thank you.. you will have a lot of orders coming from my way.... God bless you guys you inspire me to be better than I was

[@booiiiiibsyoutube]

I Am Thankful for Getting to Know You All & For KZbin. For Life’s Great Treasures & Technology. Making This Possible Thank You! Source Energy

[@StoneCoatCountertops]

Thank you so much for your kind words my friend. Stay tuned 🙌

[@susanmolnar7323]

Thankful small businesses like yours is still open and employing others!

[@cynthiadee7414]

Oh my goodness! I’m 71 and have a big ol’ Harley with motorcycle endorsement on my license. I love to ride. Her name is Myrtlebelle. I had the big bore kit put on her. LOVE my motorcycle.

[@dustbusterz]

Wishing you A Great Future Chris. Success Is Avhieved thru Consistant Trial and Error!

[@robinquirk7201]

I'm concentrating a business. I love the waterfall ideas

[@sharonbapp9613]

I’m a 78 year old widow and I was able to do this over my old Formica counter tops. Loved it and it’s held up very well. Hard as nails! I’m going to remodel my kitchen and think I will change the pattern from brown veined stone to whit marble with caramel type veins. If I can do it anyone can

[@belindaanderson4078]

Texas in the house! I'm having to watch the replay dangit. Love watching and learning. Just bought a 1920s home and was really dreading paying for new countertops. I want this product. Such beauty. Then you go and say showers. Oh my. Now I'm hooked!

[@StoneCoatCountertops]

Thank you for watching Belinda! We would love to see what you can do with Stone Coat Countertops epoxy! -Nathan

[@tamaraperchiano7207]

thankful for the ability to keep learning and sharing

[@warlionx.6632]

You know you are in the correct place when there are zero "no likes" in the dashboard, my like was 1314 by the way, the class was really good, thanks, guys.

[@jestinloveday584]

Hey guys. Up in Roseburg here. I have watched all your videos and have done a few projects with what I have learned from you. A waterfall table, a couple bar tops. I own a small woodshop. Was curious what a rough square foot price you quote your potential customers. I have one who wants to revamp their 1970's laminate countertops. Keep on doing what you love my friend. Love your enthusiasm and passion for what you do.

[@colleenperkins881]

Justin, PLEASE contact me...I live in Winston. I have REALLY been wanting to see the results of this product in person. I would LOVE to learn how to use this product to resurface my kitchen counters. I work at 7-11, 10pm to 8am Thursday thru Sunday nights. THANKS IN ADVANCE!!!

[@lucascalvo2261]

I'm opening my own company using stone coat countertops knowledge!!!

[@pip5461]

You've got this Chris... good luck with your new venture ...!

[@vincejamison8078]

Wow, that IS close. A definite WIN. I actually thought you screwed it up at one point. What I learned from the lesson is, it can change dramatically with a simple addition, and/or technic. Well done.

[@counterfusionllc1867]

Great show! Sorry to see Chris go I know everyone will miss him, not just at the office, but here on youtube as well. May you be blessed in all your endeavors. Love both of the pieces made tonight!

[@robertchandler467]

Trying for my first time and I'm amazed of what it can do and look like

[@daleesalinas474]

We’ll miss you Chris best of luck and may God Bless you in your new endeavors.

[@PitterpatSkincare]

Thank you so much for all of the education you guys provide. I feel like I know all of you and I love your product. Best of luck Chris!

[@mikeelek9713]

Chris - best of luck in your next adventure. You will do great things in your life.

[@kimbathewhitelion6972]

I miss riding the bike with the hubby. He had a stroke in 17, so I don't ride anymore, didn't want to put any extra pressure on him with me on the back & I miss it. Bikes are in my family's blood as my dad use to race.

[@robinquirk7201]

Nice to have your work life like a family

[@markolsen1096]

I'm redoing our kitchen, and doing the backslash, and then I want to get your kit in blues and turquoise and neutral colors

[@annquinn9342]

Good luck Chris I wish you all the best

[@ricklewis9369]

Great Chris good luck in all your future endeavors.

[@StoneCoatCountertops]

Thank you for your kind words for Chris. We appreciate you🙌

[@pokenana2237]

Omgosh! I’m an artist and hate the thought of paying the high prices for countertops so I just knew there had to be another way. Watching your DIY’s- I got this!

[@StoneCoatCountertops]

Yes absolutely!! Please let us know if you have any questions, we can not wait to see what you create 🙌💪

[@pokenana2237]

@@StoneCoatCountertops hi I’ve noticed that’s you’re out of stock on some of the color kits I’m interested in. How do I find out when they’ll be available?

[@pokenana2237]

I’m wanting some blue green designs

[@IM_BATMAN39]

I'd love to see you do more black white and blue patterns. I want to do my bathroom countertop.

[@ricklewis9369]

Florence, SC and I love watching. About love it is a problem

[@cheryllundholm8779]

You are found to be missed, Chris! Good luck in your new adventure!

[@wsround]

I am wondering if you sprayed some of that spiderweb paint on the wet epoxy if it would give the effect on the amazonite

[@Mommacc1]

That is a beautiful counter. I would like to ask how would you do an older kitchen countertop with a raised front lip, squared off side edge, and a four inch rise at the back? I love the brown, black, and white that you did on the video. It is a typical Home Depot countertop.

[@hentycatsanctuary2951]

i am in Australia where can i get your products or do you ship to Oz i have old timber floors and not very level, can i still use this product and do you have a video of using it on timber floors ?

[@Grateful2Him]

I love this company! I am Thankful for you, Stone Coat❤️ May the Lords blessings continue for each one of you😘

[@icecreamladydriver1606]

I would like to see the finished product as in what you do with the projects.

[@one1wizard]

Question. I'm making sample boards. What material do you suggest using. Foam board or plywood

[@rubylapequenachef1202]

Hello i love lear about epoxy i want to thank you for teach us i think I found my future and i have a question after pour the epoxy how long i have to wait for torch it and if i have to put las layer and how long i have to wait thanks i love the show

[@adamcummins1440]

Best of luck Chris in your future endeavors!

[@thomaswright6250]

God bless on your new Journey Chris and awesome video thank you

[@susanfitzpatrick4978]

Wishing Chris the best. I am looking forward to learning so much from you all! And CAT'S Eye is perfect.... love the piece.

[@jess65963]

I’m from Maine, Mount Desert Island. Love your program, could you make a demo on scrap woods as a cutting board? Or larger?

[@sharikalous1121]

Wish I had your workshop!

[@shevuansereday7421]

How do you fell about using different colored flakes and powders advertised as acrylic and gel nail decoration products.

[@lewiswhitejr2494]

Altoona Pennsylvania here. How do you guys do a countertop that has the sink molded right in with the countertop. 70’s/80’s style bathroom vanity top.

[@delorisbledsoe2959]

I love you guys you're the best. Thanks Stone coat. Keep the video coming. Awesome stuff.

[@kikimax2058]

Love your talent .. thanks guys , Kryss from 🇬🇧

[@lindamills7136]

I have and old counter top that's warped...Will this stonecoat technique level it back out?...or what do I need to level it out before application?

[@StoneCoatCountertops]

Linda, give our project support a call we would be happy to go over details and what would be needed.

[@tonydennie3460]

I used a 2lb hammer on a sample board with the UTC held up great

[@carrierabel6708]

Bozeman Montana We so love your products!!!

[@MilwaukeeDevilDogg]

How do you clean your buckets? What do you use?

[@gwendolynking1232]

Hello from Austin, Tx...... I was trying to see what Brand Spray Paint you are using....Thinking about redoing my countertops

[@codetech5598]

Rustoleum metallic and stone colors except for the special "string" marble spray which Stone Coat sells on their website.

[@oliviapower6503]

Watched the replay, great show loved both pieces, I'd call the big slab 'tigers eye'. Last but not least, good luck Chris in your new venture. You got this. X

[@TheAGonzalez12]

Can you tell me when or why i would use "art coat" "quick coat" ? Also, my quick coat hardener has turned yellow. Can i still use it?

[@CindyMorningstar-i1r]

I am wanting to start a business.. I am obsessed with this product...

[@nancygrissett6280]

Do u have to put a top coat on your counters ? Also can you cut on your counters without leaving cut marks?

[@michellee8913]

Hello..I have a formica countertop with built-in backsplash what is the best way to remove the backsplash so I can do a poor on a surface that cannot be moved?

[@hisus.ttinabar5791]

Papua New Guinea tuning in

[@quincebutler9061]

I have a very rough garage floor. Could I use this system on it? If not what do you recommend?

[@StoneCoatCountertops]

Great question Quince! For best results, we only recommend applying our flooring epoxy over a cement material. -Nathan www.stonecoatcountertops.com/tutorial-center/3d-metallic-epoxy-flooring/?chargeId=23641ab4-bb0b-46c2-bf97-aaf930302a76

[@dallascallander1202]

the big art piece!! are we going to finish it ?? I "LOVE A THAT.

[@Justplayit1time]

I love this caramel top, i want to make this for my daughter, what exactly were your colors used again i coildnt tell for sure, i love your videos, my first piece turned out great thanks for everything!

[@richsmidtke119]

where did you get that plunge saw for cutting off the back splash

[@melissamixon1805]

My back splash is granted tile if I do this on my countertop is it possible to include the back splash?

[@MJMPOutdoors]

Love your videos. Watching from Iowa here. Would love to see a good video of how you cover a high back edge on a counter top.

[@Nanna-hpi]

Watching you from across the world. Amazing big slab. Whatever name you gave it, for me it "tiger wood".

[@caseyisabell2911]

Good luck Chris!! Love both the pieces!! Big one reminds me of a melted hot fudge sundae with Carmel sauce. 🍨 Can't wait for more videos!!!! 😁

[@morde29]

Watching from Africa and I really want to try your stone coat out on a small kitchen counter I’m about to do and need all the advice I can get. Am in the process of purchasing from your website...

[@StoneCoatCountertops]

Thanks Morris! What colors will you go for? -Kim

[@morde29]

@@StoneCoatCountertops I would love to try out the Carrara Marble Epoxy Kits

[@morde29]

@@StoneCoatCountertops I saw different kits on the website and decided to go for the Carrara Marble Epoxy Kits. So what I have to find out is the total size of the counter top so that I can ask your opinion on the amount I should get because I have to order to go to my house there in the US before shipping it to me in Africa, therefore I have to make sure I have more than enough to get the job done because if I don’t I will have to wait like 2 months before I can get more products to me in Africa..

[@jennyeliza7350]

I would love to purchase your wonderful kitsch but you guys do not deliver to Puert Rico😭

[@triciawhislerable]

I got in on the tail end did I hear correctly that Chris is leaving??? Gee whiz, gonna miss him as part of the group. I am very happy to see you guys back. I would like to know what you think about the process of doing this on acrylics??

[@krisloggins1162]

What if my counter is textured Formica? Any special prepping?

[@roxoriginal732]

Pro tip ... wipe your buckets clean with alcohol spray and a rag and reuse them ..i do it all the time,, keep em coming guys love the work you do and have learned a lot watching your vids ..take care guys from roxoriginal London England 🏴󠁧󠁢󠁥󠁮󠁧󠁿👌

[@faithmccracken7324]

How would you prep a hickory wood island top? It's thick and solid and has already been installed. It currently has a clear coat of Ekopel 2k on it. I want to stone coat it!

[@StoneCoatCountertops]

kzbin.info/www/bejne/f3OmoqKrn8xgoM0 Give us a call we would be more than happy to go over more detail and see what we gotta do to get your project complete🙌

[@db7040]

Quick question as I have not found the answer and no replies back from you guys. Black galaxy over solid surface does it need a second coat of epoxy ????

[@StoneCoatCountertops]

Great question Darrel! Yes, You will need a second coat when doing our Black Galaxy project. -Nathan

[@db7040]

@@StoneCoatCountertops Thank you I just finished up a small section which is nothing more than a coffee area when I do all the main tops this weekend I will definitely do 2 coats !!!!

[@susanmolnar7323]

How do fireplace mantels do with the epoxy....

[@marilynjack6031]

I also have the the bidet toilet and you can hook it up to the hot water

[@wandagreeley5664]

I really enjoy videos. I'm in upstate New York

[@lewiswhitejr2494]

I’m thankful for my family,my firstborn granddaughter and still alive almost 2 years ago major tractor trailer accident don’t remember anything about it.

[@littlelulu4107]

It's a good thing not to remember sometimes...I was burnt as a babe and over half of my face, chin and hands are damaged however Idn recall anything about it. It used to bother me as a young woman but not anymore. I see it everyday but it's not who I am. I'm grateful not to remember. All the best💜💚🧡

[@sherrysweet4574]

was this a paint primer white coat to start with?

[@casanova1925]

Great episode...

[@diogenes1784]

Can you explain please: if the alcohol can be danger by applying the torche, or by the time All the other colors that alcohol is not inflammable anymore?

[@marymakovsky6219]

Watching from Florida

[@lesleypietersen9453]

hi guys, love your channel

[@StoneCoatCountertops]

Thanks Lesley! Have you had the chance to use our epoxy yet?

[@lesleypietersen9453]

@@StoneCoatCountertops not yet

[@lesleypietersen9453]

This is a new interest of mine and I find it fascinating and beautiful

[@christinehebden4012]

I know it’s been awhile since you posted this video but we are still having a glove shortage here in MA (Cape Cod specifically) Pre-Covid life I was a 20 yr Stylist as a trade 2019 was my first year being 100% self employed (Art being my side hobby) then losing my career completely minus a few clients on the side at their homes😔 Still need gloves for everything I have found them still at my local Salon Centric, Beauty Pros and Sally’s (for unlicensed people) Anyways hope everyone is returning to some kinda normalcy and staying healthy. Love you guys And your products!

[@johnhudson2828]

Do you have a distributor in Thailand? I got this thing !

[@kevinberg8886]

Do you think tiger eye is obtainable with stone coat? From northern Minnesota.

[@kevinberg8886]

If so I’d like to see it and recipe for it

[@robotako189]

Hi Mike what paint spray you using, enamel, acylic etc....?

[@ricklewis9369]

I like that it looks very good.

[@goja981]

Which epoxy you used for this show???? I would like this on my counter tops. Thanks.

[@ladiidee4213]

That amazonite granite is a beautiful stone.i think you should master it a little more and u need a cream color lines. Its white or off white u did aqua and gold

[@Marketmagicdailypay]

Awwwww good luck to your future endeavours Chris 🤗

[@melissamixon1805]

Can you this over man made marble if so how? You you have a video on how to do this??

[@sarahbuttle818]

Do you supply the uk

[@StoneCoatCountertops]

Thanks for watching! We may be able to ship to your area please give us a call if you are interested! -Nathan

[@moonowl4912]

They make electric warming trays for food. Around 20 to 50 dollars. I bet that would be the perfect temp to just let them sit on. Might be safer than the space heater. You could also use a heating pad.

[@StoneCoatCountertops]

Interesting we have not tried that!

[@moonowl4912]

@@StoneCoatCountertops let me know how it works.

[@chapmanrose76]

Can you use paint from a can?

[@PhilHodge1871]

I've tried to order off the stone coat website and I can't seem to ever get an order thru. I've been stuck buying glaze coat locally which sucks. Any suggestions?

[@jillianpritchard647]

my countertops have a dogear taken out plus the 33" sink cutout. how can i figure the sq. ft I also have a 15 ft X 28'W "L-shape" top. please help. Praise God

[@michelleestefaniaariasmelo7556]

hi! what material is the board? wood ? thank you

[@StoneCoatCountertops]

The wood is MDF board, it can be picked up at most home improvement stores. You Got This🙌

[@franciscoheredia7873]

Can this product be applied to floors?

[@teewolf5322]

I wish ya good luck chris

[@trendarenegar5553]

Is this where I ask live questions??

[@StoneCoatCountertops]

Trenda, you can give our project support a call or send us an email!

[@jefferykuhn-d2y]

Do you let people to sit in on your live time or when are you guys doing a class

[@kenbrown3223]

Hey, where is my part B, I ordered a 15 gallon floor kit, got everything but part B, been begging about you guys, now I have to put the job off, Thanksgiving is coming and I got too have this done