Epoxy Resin and Wood Night Lamp - Giant Trevally Fish / How to make / Resin Diorama / DIY.

[@deannacauley166]

That is gorgeous it's like having a piece of the sea

[@magicwoodjewelry]

Thank you! Glad you liked it

[@sheep1ewe]

Awesome! I realy love Your miniature worlds!

[@magicwoodjewelry]

Thanks a lot Vampi ! 🤗 Really nice to hear it 🤗 Thanks for your support. I appreciate it 😊🤝

[@jackcleveland1175]

This was an incredible piece of art! Beautiful.

[@magicwoodjewelry]

Thanks Jack! 😊🤝🤜

[@ady5041]

Just amazing work. Well done man👏👏👏

[@magicwoodjewelry]

Thanks Mate!☺️🤝

[@mariajosereinagalindo6741]

Precioso!! Una maravilla de trabajo, enhorabuena!

[@magicwoodjewelry]

Gracias! 😁 Gracias por tus comentarios. 🤝😊✌️

[@sakiryyasar]

10:21 i like this edit 😁

[@magicwoodjewelry]

Thanks! I'm glad you liked my montage ☺️🤝

[@derfart78]

Super robota. Bardzo ładna. Zaczynam się bawić żywicą. Dużo nerwów i błędów jak narazie 😊 Tym bardziej doceniam👍

[@magicwoodjewelry]

Hej. Dzięki za opinię 😊🤝 Taaaa. ;) Jest przygoda:) Sporo już zrobiłem,ale w tym temacie często pojawiają się jakieś psikusy przy pracy:) Powodzenia! 😊🤝✌️

[@daniellossmacieira3684]

Que espetáculo, verdadeira obra de arte, meus parabéns

[@magicwoodjewelry]

Thanks Man ☺️🤝🤜

[@bulls2127]

super!!!!

[@magicwoodjewelry]

Thanks!☺️🤝

[@charusmita100]

Superb

[@magicwoodjewelry]

Thanks so much! 😊✌️

[@maggiepillow2421]

Amazing bestie ❤❤❤❤

[@magicwoodjewelry]

Thanks a lot Maggie 😊🤝

[@maggiepillow2421]

@@magicwoodjewelry your welcome bestie 🥰🥰🥰🥰

[@JJ-zz7zv]

When you add layers of resin to the first layer, do you wait till they’re fully dry or semi wet? Just wondering if there is a noticeable “wall”? I guess you would say in between the layers. Like can you see two lines going through the whole middle part where the layers join or is it all uniform if you get what I’m saying? Thanks! Insanely talented btw

[@magicwoodjewelry]

Hi. Thanks for comment. When I add layers, I wait until the resin starts to gel. Then I can add figures. otherwise they would go to the bottom. If you add the resins at the right time, the lines should not be visible, but that doesn't matter. They are only visible from the side and top. They are covered by wood from the side. The lamp should look nice from the front and back:) you can see it clearly in the video when he adds figures/fish. By creating layers, you can achieve a cool effect by adding figures at different levels. You can also pour it all at once, but you must have resins for deep pouring and mount the figures on a transparent mounting first, as in this case kzbin.info/www/bejne/iqqpgZdji5ypn6c

[@rinatpetrov315]

добрый день отличная и увлекательная работа) подскажите не совсем понятно каким образом делали пузырьки ? это камешки или ямочки зубочисткой не понятно цает разный на уровнях?

[@magicwoodjewelry]

Hi. Thanks for the opinion. I'm glad you liked it. I'm sorry, but I don't quite understand what you mean exactly. Air bubbles are not visible. I used a toothpick/stick to paint tiny fish that run away. What may look like air bubbles are tiny pearlescent dyes. I added a little bit of it to the resin.

[@AngelaJones-vh1ks]

What did you paint the wood with before pouring? Thanks!

[@magicwoodjewelry]

Hi. It is painted with resin. Blocks air bubbles escaping from the wood.

[@jaimezapatagomez]

Wow beautiful, What do you think about the resin you use in this video? is it good?

[@magicwoodjewelry]

Hi. Thanks for comment ! Nice to hear it. The resin is really very good. Up to 10cm.One of the best I've worked on. I recommend . There's a link in the description if you want. Thanks again. Best regards.

[@jaimezapatagomez]

@@magicwoodjewelry Thanks

[@magicwoodjewelry]

@@jaimezapatagomez ☺️🤝✌️

[@MelissaQuinn-xb9kw]

Would you sell/ship the trevally figures?

[@magicwoodjewelry]

Hi. I designed and printed them just for the purpose of creating this lamp

[@felipesanchez1537]

😍👍

[@magicwoodjewelry]

Thank you! 😊🤝

[@andreacubillos7829]

Hi amazing art work! ❤ Could you share how much resing in kg. Did you use for this project and how big the lamp is? Pls. To know how many kilograms of resin have been used. Many, many thanks!!

[@shawnieleaf2277]

I think you linked the wrong thing for your resin. it takes me to a page offering for me to make 10 % rather than the actual product you want to recommend (to make that 10% referral fee)

[@magicwoodjewelry]

Hey. Thanks for the information. It's actually a link to an affiliate program Here's a link to the resin if you want to use it teexpert-tech.com/collections/deep-pour-resins

[@juliemiller3236]

Love the project, but had to turn my volume OFF! That music is maddening after 2 mins.

[@magicwoodjewelry]

Thanks for comment. Hmm, I understand. Music is a matter of taste. I get that you might not like it :) 😊🤝

[@ZoltánPuposTide]

It turned out beautiful, what is the name of the mold in which it was cast? Thanks.

[@magicwoodjewelry]

Hey. Thanks for the feedback Made of foamed PVC but I glue thin plastic on it to get a shine you can also use thicker plexiglass

[@ModeliteDiorama]

These Ocean water lamps from you are so relaxing!

[@wendyjones5871]

Seeing projects like this it just AMAZES me as to the amount of really really talented people out there!!! Dont ever stop sharing your true talent with us Thank-you! It is vety much appreciated!!!

[@magicwoodjewelry]

Thank you for your comments. Nice that you liked my works. I really appreciate that. Thank you! 😊🤝✌️

[@Tomy_Yon]

It's like the Mariana Trench, but absolutely gorgeous! ❤

[@magicwoodjewelry]

Hi. Thanks for comment .This is what my client requested :) Thank you and I'm glad you liked it 🤝😊 🤜

[@verdageneknight7849]

that is really nice

[@magicwoodjewelry]

Hi. As always thanks a lot for your comment 🤗 I really appreciate 🤝😊

[@wendyjones5871]

As a scuba diver and true lover of our beautiful oceans i really really appreciated this GORGEOUS piece of art!!! Never stop sharing yoour amazing taldnt with us!!!!!

[@magicwoodjewelry]

Thank you!. I'm glad you liked my work. I appreciate it 😊🤝

[@DeeHopper]

Stunning

[@magicwoodjewelry]

Thanks!😁🤝

[@teexpert.official]

Stunning!

[@autotourism]

This is a very cool night lamp project. You're a wizard.

[@magicwoodjewelry]

👋 Thank you for your comment. I appreciate it. I'm glad you liked my work. Thank you! 🤗

[@АлександрМисько-я7э]

Очень красиво. Сколько ушло эбоксидной смолы на проект?

[@magicwoodjewelry]

Privet. Spasibo! 🤝 About 0.7 l with hardener.

[@sarveshsawant8005]

I am also trying to make night lamp like this but your work is outstanding bro ❤❤❤❤

[@magicwoodjewelry]

Thanks a lot dude. I'm glad you liked my work. 😊🤝 I appreciate it and wish you good luck in creating your miniature world. You can show how you do. I'm curious. If you have any questions write. 🤜

[@claycreations.byradha]

What ia the 3d printer yiu have used

[@magicwoodjewelry]

@@claycreations.byradhaHi. now i use anycubic photon ultra dlp . the fish for this lamp were printed on an older printer that I previously used, anycubic photon.

[@magicwoodjewelry]

@@claycreations.byradha store.anycubic.com/products/photon-ultra now i use this.

[@claycreations.byradha]

Thankyou but which is more easy to use .

[@magicwoodjewelry]

@@claycreations.byradhaHi . it's clear that the newer printer is better. photon ultra. But 3D printing is not simple. You need to learn how to do it and have patience at the beginning ☺️ Watch a video on KZbin, entering the name of the printer I gave you and then you will decide whether it is worth buying. is it good for you ☺️

[@idcunningham]

Hi i loved the video do you sell the 3d fish or the 3d file would love to try my own version of this never done before but would like to try thanks​@@magicwoodjewelry

[@amitspecially]

How did u create sparkles in the water? What does aceton do? How did you created the fish models? And were they real moss?These answers would be very helpful. Liked and Subscribed 😊

[@magicwoodjewelry]

Hey, Thanks for subscribing ;) 1.Add a little perlescent powder dye to the resin. You can see here kzbin.info/www/bejne/m6a7n3WgitKZgpo 2.Fish. This is shown in the video :) You can see here kzbin.info/www/bejne/sJyVnnysnZyJY6M I made a 3D model and printed it. 3. Acetone is used to clean the surface after sanding. It can also be used to degrease the surfaces. 4. Yes, this is real moss. Names reindeer moss and caribou moss.

[@amitspecially]

@@magicwoodjewelry Highly appreciate your response. Looking forward to more videos.

[@paulpavon3370]

15:07 Awesome job! Really inspiring! Great imagination! What kinda printer do you use to make figures?

[@magicwoodjewelry]

Hi. Thanks for comment. Nice that you liked my work 🤝😊 I printed these on anycubic photon. Now i use photon ultra dlp

[@paulpavon3370]

Txs for the reply! Pls continue sharing your inspiring ideas!

[@easylivingsherpa]

I notice that alot of your creations are leaving bubbles behind. Is this by design.

[@magicwoodjewelry]

Hey, it depends on who likes which effect. Sometimes I leave them on especially for water projects, but sometimes for other projects I use a resin vacuum pump. In this project, pearl dye is added, which may give the illusion of small air bubbles, but in fact it is pearl dye.

[@robson1748]

Beautiful 🤩 well done 👏🏼

[@magicwoodjewelry]

Dziéki Brat! Thx! 🤝

[@irina_kras]

❤это великолепно 🎉🎉🎉🎉🎉

[@magicwoodjewelry]

Hi. Thanks for the opinion!

[@MariAnMonSan]

Una verdadera obra de arte

[@magicwoodjewelry]

Gracias! :) Nice that you liked my work. I invite you to subscribe and check out my other works;)

[@A.R.C.77]

Do a reef one with fish and coral

[@magicwoodjewelry]

Thanks for comment. It's a cool idea I have one such project but it's been lying unfinished for 2 years :) Maybe it's finally time to finish it 😊🤝 Thanks!

[@A.R.C.77]

@@magicwoodjewelry yeah can't wait to see it 😁

[@oluwafemisamuelolayiwola1110]

Creativity at it's best ❤

[@magicwoodjewelry]

Thanks for your comment! Nice that you liked it 😊🤝✌️

[@임채현-c8u]

와 진짜 능력자다..

[@magicwoodjewelry]

Thank you. I'm glad you liked my work. Thank you for your opinion ☺️🤝

[@cherylpetersen4573]

Super cool!

[@magicwoodjewelry]

Thanks so much! 😊🤝

[@ДиляраШагабеева]

Какая красота

[@magicwoodjewelry]

Spasibo😊🤝

[@Cliffrabbit]

Do you have the STD or OBJ file for sale for the 3d fish?

[@magicwoodjewelry]

Hi. I don't have it brother. I did it just for this project.

[@Cliffrabbit]

@@magicwoodjewelry Well.. not a problem. Your work is BEYOND cool. TY for the response.

[@ЮлияЛепетченко-п2м]

Красота ❤❤❤🎉

[@magicwoodjewelry]

Thank you ☺️🤝

[@mariosergiobarboza7095]

Fantastic.

[@magicwoodjewelry]

Thanks a lot! 😊🤝

[@magicwoodjewelry]

Thanks a lot! 😊🤝

[@МаксимСтепкин-с3ц]

Очень красиво, медитативно, завораживающе! Повторить бы ))

[@magicwoodjewelry]

Spasibo! 😊 I'm glad you liked my work 🤝 ✌️

[@JohnIrby-u2h]

This is so awesome! May I ask where one can acquire these types of wood pieces? Once I find the wood, I'm ready to try my own!

[@magicwoodjewelry]

Hi John. Thanks 🤝 and sorry for the delay. Small break. This is burl wood. It is a disease that occurs on various types of trees. You can read about it here. en.wikipedia.org/wiki/Burl I buy them at home in Poland from my friends. Preferably wood after vacuum drying. You will also find them in your country at an auction or other place. Just remember that the wood for the resins must be dry 8 to 12% humidity. If you use wet wood, it will crack and bend while drying, and will release a lot of air bubbles when poured with resin. If you have any questions write. I will try to answer as soon as possible. Best regards! MW 🤝😊🤜

[@FranciscoAntonio-rd1eu]

Realmente hermoso, creaste y capturaste un momento en el tiempo.

[@magicwoodjewelry]

Gracias! I'm glad you liked my work 🤝😊 Kind regards. 🤜

[@CarlosCampos-ji6sk]

Que madeira vc usou

[@magicwoodjewelry]

This is burl wood, but I don't know exactly what species. I had this piece for several years. Probably maple or poplar

[@crystalmatu]

Just beautiful!

[@magicwoodjewelry]

Thanks so much!

[@stephanetittarelli1273]

Tout le monde s'en fout tout cela est minable.