Epson ecotank et-2820 review , Printing sticker, photocard, business card

[@mulababy3850]

So far only person to test what Im really looking for in these printers . 👍🏽

[@bnuttsgee]

Tank you so much! Watched about 20 vids that wasted time and you answered questions I didn't even have with out speaking a word. 👍👍👍❤

[@bymarcissus]

Thank you for watching ^_^

[@roro051]

It’s easy to remove the pizza wheels, you have to make sure you fully downloaded the driver & in the settings on your laptop turn off fast print, quiet mode that solves it. I’ve had pizza wheels all the time until I was able to fix that way if that didn’t work unplug the printer and carefully clean out the wheels

[@bymarcissus]

I did literally everything but no result so in the end i changed the printer.

[@lunarviewpoint]

Do you know if that's possible with epson panel app? On android

[@denniswatts3143]

I have this printer. It does not make prints with the lines on it you refer to and I am very pleased with it. If you found a fault with it in the form of lines appearing on prints, why did you not return it for a replacement?

[@bymarcissus]

I did, But had the same problem and had a very bad experience with the seller so i decided to never buy the Epson printer ever. To be honest for me the HP printer is faster.

[@onrel-javan]

I have this printer and have the same problem with the lines on photo paper. HP is definitely better and quicker!

[@apricity7934]

OMG, these are so pretty. I don't have a printer nor i want to print, but i watched it till the end. Really love your aesthetic 😂❤️

[@bymarcissus]

Haha thank you for watching. I appreciate it💕

[@mspoetic247]

✨Thank you for showing/doing what I actually needed to see ✨

[@ldang0792]

Put your printer settings to print slow mode and it should help with the lines

[@bymarcissus]

i did but nothing works.

[@Sararosa077beautyandnails]

I love the glossy look 😊

[@bymarcissus]

Same here . I love glossy the most.

[@kavoadakunimata20]

Thank you so much. I've learnt so much from this video ❤

[@n.m.8266]

what do you mean by pizza wheels marks? I don't see it in the video and can't understand what you mean. Could you please explain?

[@bymarcissus]

Little dots appear when the printed page is too wet with ink. The wet ink then gets picked up by the small wheels or "cogs" located under the exit guide. it looks like someone rolled a pizza wheel across your paper. Hope this helps .

[@JustNow42]

My ET-2875 can print manual dobbelsides but the App Epson Smart Panel can only print a whole file, e.g. file is 100 pages but you only want 10 dobbeltsided . This is a software error, very easy to fix. But our local agent seems not able to communicate with Epson. What is wrong?

[@RGdesignapparel]

Hiii…all I could find is Epson ecotank et 28 series. Will this one work the same as yours? I couldn’t find 2820 😊

[@siyingsong5240]

Hi! what ink do you use? pigment ink or dye ink?

[@wendypatriciabushby7489]

Hi, my name is Denine Nice to meet you I know you like BTS. Also I am a fan of theirs

[@blackhoundrise8431]

thanks for doing this. this as quiet useful for me as i plan to print on matte paper with same printer.

[@bymarcissus]

Aw thank you ^_^

[@KimBerry-l8y]

The colour on my comes out dull, how did you make yours so bright and vibrant ? 😊

[@bymarcissus]

I changed the printer 😋

[@monicagarcia-tt2sw]

Hi what settings do you use in printing photos in glossy sticker papers pls.. 😢 my photos and faded light.. can i use vivid in settings so it will looks better?

[@bymarcissus]

Honey, I use (better quality option ) while printing and also i have video on my channel about how i print and what settings i use. If you wanna check! ^_^

[@movewithmillz]

I have this same printer just bought recently but the print quality don’t look at vibrant as yours 😩 I’m wandering if it could be the paper or settings

[@bymarcissus]

It has to be the paper cause this printer prints very well. The colours are very vibrant. Check out the paper i use or different paper.

[@va.n1ll4]

Do you need a specific ink for this or just the ink the printer comes with?

[@bymarcissus]

The ink that comes with the printer.

[@mona_9990]

Can i use epson Ink number 101 , 103 , 108 on this printer ? Or should i just use ink number 502 ?

[@bymarcissus]

Don’t use different ink for the printer that might break the printer .

[@RoryJb]

Hey can you do boardlerless a4 printing with this printer?

[@bymarcissus]

Yes, you can

[@RoryJb]

@@bymarcissus I’ve been trying for a couple days now can’t seem to figure it out 😕

[@GreyHavenn]

oh wow I didn't know the pizza wheel thing is common problem w epson printer 😢, just bought 1 last month and being testing all kind of paper w it, and i encountered the same problem w the line on photo paper (230gsm)

[@bymarcissus]

That’s why i bought HP printer and if you can return it.

[@NuriaSaladrigasLarroy]

I saw in another video that you have to check for firmware updates. In her case it solved the problem

[@Anonim-sz7nt]

Merhaba! Şu an satışta olan yazıcılardan hangisini önerirsiniz telefonla bağlanılan ve sticker için

[@christinarotondo1331]

was this an upgrade from the 1810 that you had? do you prefer one? im doing so much printer researh at the moment!

[@bymarcissus]

Yes, but personally i don’t like Epson now, It used to mark pizza wheels ( little black / white dots) on my paper. I use Hp now.

[@lunarviewpoint]

Hi, great video! I'm using the same printer. But I'm getting scratches and dot on my glossy paper. I contacted epson, who said I can only use epson paper. Have you found some paper don't work?

[@bymarcissus]

I returned the printer, I didn’t find any solution to this.

[@namscavallin8650]

what print setting do you use?

[@bymarcissus]

I also show the setting i use.

[@RGdesignapparel]

Is this printer good for making colorful stickers and bookmarks? Please

[@bymarcissus]

Yes

[@yohaydn8489]

Would this work for ppd-1? For the heat press machine

[@mona_9990]

Does the printer have to be plugged in all the time?

[@bymarcissus]

No .

[@kirstendecoster3201]

Hi, I just found your video trying to troubleshoot printing on cardstock with my ET-2820. It's only 200 gsm, not 250 like yours, but it doesn't work. It "prints" everything on top of each other right on the first edge that enters the printer. You would think the paper is too thick to get through, but when the printing is done, it feeds the whole page through just fine, and unfortunately also smears the ink all over. Could you tell me what paper settings you use?

[@bymarcissus]

Did you try the same setting i used in the video?

[@kirstendecoster3201]

@@bymarcissus I couldn’t really see what settings you used, so I don’t know. Also, you can choose paper settings on your computer, but also in the menu on the printer. Do you know if it matters where you do it? Thank you for taking the time to replay.

[@lacraftyhouse]

Thanks very much for sharing ! Do you do sublimation with it ? I bought the same printer and I m looking for a compatible sublimation ink .. have a Nice evening ❤

[@bymarcissus]

After some searching online, I found that sublimation ink is only to be used for Epson printers, not HP. But you can use HP iron-on transfers to print to fabrics and bags. Ideally, the inkjet printers should be able to do this, hence you can use your Officejet to perform this operation. But my HP printer is not suitable for sublimation. Hope this helps.

[@loficapital]

Hippo ink $29 amazon with a new printer and this would essentially “convert” your printer to sublimination otherwise you would have to clean all the ink out and keep in mind, once you do this, it voids the warranty and cannot get help from the website… learned this from another helpful video

[@msreaper9758]

From your experience, whats the best printer for high quality vynal glossy stickers?

[@bymarcissus]

If you are asking me about vinyl transparent paper then i don’t prefer HP cause the printout is not as black as it should be, and on Epson black looks good.

[@Capitan_Findus]

Hi! I've just bought the same printer model as you did, can I ask you if you used some specific settings to get this kind of results? Did you use the ink provided with the printer? I'm struggling a bit at the moment, so any tips could be very helpful! Thank you very much 😊

[@bymarcissus]

I used different settings for different type of paper. And yes, I use the same ink that comes with the printer, which is 4 bottles. I hope i’ve answered your question.

[@Capitan_Findus]

@@bymarcissusThank you very much for you reply! Glad you did despite the video isn't that recent 😊 I saw you just change the type of paper in printer settings, but you didn't change any setting such as rendering color profile, ecc., didn't you? If you have more detailed settings and tips to share, you would save my day 🙏 By now, I've just used matte thick and good quality paper but the colors are a bit dull, especially darker ones. I've bought the same glossy paper as you did, so I'll wait to see the results because yours were pretty good and I can't figure it out why I can't replicate them

[@Capitan_Findus]

Update: I tried the same glossy paper you used and the result is very good!! I'll maybe also try the matte paper you bought to try again but at the moment I'm very happy and relieved. Thank you again!! 😊

[@TiffanyChantee]

@@Capitan_Findus Did you buy the glossy paper? I plan on buying a couple tomorrow. The matte thick paper was very dull for me too.

[@Capitan_Findus]

@@TiffanyChantee yes, buying the same glossy paper you did solved the problem, wish I could find a proper matte paper though

[@decenthuman6961]

Hi, thank you for the video. It's so informative and you did a very good job editing it. I want to ask, did you use the original epson ink or art paper ink for printing. It look really good and work on all paper ✨️

[@bymarcissus]

Hey, Thank you for watching ^_^ and i used the original ink that came with the printer in the box.

[@drukcg]

Hi, I could not find this specific printer listed on amazon, do all these papers also work with Epson EcoTank L3520 and all?

[@bymarcissus]

Yes, but not the glossy paper. For Epson printer you must buy epson paper.

[@fynahyshamm7973]

thank you for the review, i love it 😉 its help me a lot

[@tinypaintingdesk1829]

Do you know if there is any vinyl waterproof transparent paper for stickers if your not using a laser cut printer?

[@2007sherbert]

Hi, I enjoyed watching your video testing different papers on your printer. How did you get your photos to be 3 by 4 squares on A4 paper?

[@bymarcissus]

I add lots of pictures on paper A4 and thn cut them.

[@2007sherbert]

@@bymarcissus Thank you for your reply. Is there any particular software that you use?

[@bymarcissus]

No, i use canvas to edit the pictures and mobile to print but sometimes i also use laptop.

[@tusandebbarma241]

Recommend which printer is worthy for 300gsm

[@bymarcissus]

Hp.

[@tusandebbarma241]

Does it occur error ? Sister

[@lilytran29]

What about matte sticker paper setting 😢 ???

[@bymarcissus]

On matte paper you must use (matte paper )option. And the colours are more vibrant on matte paper.

[@TheIslam01]

I've epsom 2810. Bought glossy sticky label paper from amazon. The prints came out very very faded and dull. Any suggestions??

[@bymarcissus]

I haven’t try label paper yet. What i tried is a sticker paper which works well for me. And for the faded and dull result, You should try print quality (High). I hope it helps.

[@mireiafdzart]

Hi, I have the same printer, but my prints go with some grainy with the light colors. I change a lot the configs, with high quality... are you printer do the same? little spots?

[@bymarcissus]

It never happened to me, text me on Instagram the print (pic) so i can see.

[@jasminem.6644]

Had me with Still With You

[@bymarcissus]

My favourite ^_^

[@bluesirie0112]

Hi! Did the 250gsm cardstock went through the printer???

[@bymarcissus]

Yes. ^_^

[@salyx6687]

Which paper setting did you use for the sticker paper ? (And was your sticker paper smooth or matte )

[@bymarcissus]

I used (other glossy inkjet paper ) settings. And my sticker paper is glossy.

[@Rumeel12708]

Awesome video, I've wanting a tank printer to print some great pics of anime characters and make some stickers as well!!!!! I want a small one of FiftyFifty to put on my phone!

[@bymarcissus]

Great ^_^

[@josefinasofio]

Hola! muchas gracias por tu video! Quería preguntarte que configuración estás poniendo para imprimir? Estoy teniendo un par de problemas con el tema de los colores. No logro hacerlos fiel a los de pantalla. O me salen más oscuros o me salen más claros. Estoy probando en papel mate de 100gr. Revise que esté en CMYK, coloque papel "Premium Presentation Paper Matte" en las opciones desde la compu, e indique que es matte en la impresora. Algo que me recomiendes? Desde ya muchas gracias (:

[@bymarcissus]

Yo he tenido problemas con Epson así que cambie mi impresora a HP. Desde entonces no tengo ningún problema pero para imprimir en el papel mate solamente con la opción Mate te tiene que salir bien los colores. Para más oscuro baja l saturación para que no te salga oscuro. Espero que te sirve de ayuda . ^_^

[@valentinaelorza8755]

Holaa, cuál es la impresora HP que tienes?

[@bymarcissus]

Tengo el vídeo de la impresora HP en mi canal.

[@lucerohernandez959]

Hola, @josefinasofio ! Estoy teniendo exactamente los mismos inconvenientes con la Epson ET-2820, lograste solucionar el tema? Gracias de antemano (:

[@josefinasofio]

@@lucerohernandez959 holaa! La verdad que la única solución que encontré por el momento es imprimir cómo que fuera papel común (es importante seleccionar en la impresora que es papel común y en el panel de la computadora que es papel común. Aceptar cuando te salga la advertencia de que no coinciden los papeles con el que colocaste). Esto me trae problemas cómo que me desfaza la impresión y tengo que ubicar las cosas de forma rara (pegado al borde). Para imprimir simple faz es la solución que tuve. Para imprimir de ambos lados aún no logro encontrarle la solución al desfazado, ando sufriendo con eso ): Espero esto te ayude así sea un poquito! Y si llegas a tener suerte con otra configuración avisame ): jajaja

[@reineinjapan7792]

I have the same printer but won't let me print with 200gsm paper 😔

[@bymarcissus]

I am using HP now. This printer is not my favourite.

[@foof13h34]

Can I use those papers on hp printer ?

[@bymarcissus]

Yes, I made a video for Hp printer too.

[@mashiahmad1929]

I try to find this code epson,but dont have😢..can u send picture printer

[@bymarcissus]

It’s not available in Amazon anymore.

[@ariseuguncalves826]

Is it not illegal to sell photocards of kpop idols from internet? I’m planning to do this as well but Im scared of copyright infringement

[@animebaby3426]

Once it isn’t from official accounts like Gucci photo shoots you’ll be ok. Some fan cafe’s have copyrights but a lot don’t. You’ll just need to find proper sources and use “free for use” photos

[@meejay100]

Stay away from selling items with copyright infringements in general. So easy to get banned off different market places. Personal use, is fine but don’t sell!

[@nobieditz479]

Which paper u use for anime photo card

[@bymarcissus]

Hey, I mentioned the paper in the video.

[@mathunash9235]

This is a printer for images or textes (Can we print texte with this printer or only images) ?

[@bymarcissus]

To print text , you need a different paper called vinyl transparent paper. Where you can print texts.

[@warren4838]

what type of ink are you using here?

[@bymarcissus]

Pigment ink. It comes with the printer.

[@zzz3746]

I really like ur videos u r so creative, do you print well on labels? I heard that the ink will be erased because it is not stable by Ecotank printers, and have you tried a laser printer before?

[@bymarcissus]

Sorry,i have never tried laser printer and label before🥹

[@Way2go926]

There’s brother label printer. Get one of those

[@cristianaangelini6940]

Hi, what a beautiful and peaceful video 😍 do you recommend this printer??

[@bymarcissus]

Thank you. I recommend it but please ask the buyer before purchasing it cause i had problem with glossy paper . It leaves lines on the paper . But i like HP more hehe ^_^

[@cristianaangelini6940]

@@bymarcissus thank you so much. Can I ask you why you like hp more? Because I want to buy a new printer and I've always had hp but with ink cartridges and they are so expensive so I wanted to switch to Epson eco tank and I was looking for the better option. I'm still undecided about it 😁

[@bymarcissus]

I had Epson and i had so many problems with it.Epson is slow and it leaves wheels marks on glossy paper and it’s very noisy while printing. And HP is faster than Epson and it didn’t leaves marks on the paper + its not noisy at all but HP print color is very dark you just need to lower the saturation and it should solve the problem. It’s just my opinion cause i had problems with Epson printer.

[@mopikozz]

@@bymarcissus which HP printer do u recommend

[@AAa-to2tz]

Great video. I have read that some eco tanks dont grab label paper that good. Do you think thats true? Just curious before i buy. Thanks

[@bymarcissus]

Hey, They told me that this printer doesn’t print on vinyl paper which is not true so you never know until you try, I tried sticker paper which prints well , But never tried label paper , I have so idea but I think it does print on label paper as well (It has to) but please ask the seller before purchasing it.

[@yhenramirez4589]

Hiiii may i ask po what's the diff between hot and cold sa laminator po?😭

[@bymarcissus]

Hot laminate is hot and cold laminate is cold haha you can use both. it depends on you. They both do the same work .

[@lrkemajpedersen8444]

Hey. Do you know if this is any different than the 2810?

[@bymarcissus]

Hey, The speed of the print must be different but the print quality is the same. I had 1810 and the quality is the same but the problem is that it leaves pizza marks (means lines on the paper) ask the seller before purchasing it. 💕

[@lrkemajpedersen8444]

@@bymarcissus okay, thank you so much ✨🤍 I already watched your video with the 1810

[@itomic009]

@@bymarcissus Can you explain a bit about those "pizza marks" you mentioned? :) I do not see any on this video. Is it noticeable or you can only see it at the certain angle?

[@bymarcissus]

@@itomic009 I noticed that it's not actually showing properly in the video because of the lighting and the shine but to be really honest, it leaves so many lines (little dots) on the paper that it completely destroys the paper. I laminate the paper so it become less visible but you can still see it. (It only happens on the glossy paper) Hope this helps !☺️

[@itomic009]

@@bymarcissus Ok, thank you for the feedback. Is this then some error? I suppose you need to print the photos on a glossy paper to look good, but if you have marks, that is not good. Is there any other way to print photos, or this destroys them? Also, what was the issue with the ET-1810 model, why did print on glossy paper? Would you still recommend the printer or not?

[@manuela118.]

Can I buy this printer to open a photocard sale project?

[@bymarcissus]

Yes, you can . If you liked the result.

[@nobieditz479]

Which paper best for BTS photocards ?

[@Jayhons]

Paper made with Poop papers is best for BTS ❤

[@majdanej]

Omg that's cool, I wish I can do the same, looks funny, I love BTS card

[@SarahBhaiSaab]

ARMY 💜 thank you for this video!

[@bymarcissus]

Hey, Thank you for watching 💜

[@alicedad6171]

How did you cut the anime cards to such perfection? You cant have done that by hand with such a high level of precision?

[@bymarcissus]

That’s why i don’t film the part where i cut the cards cause it takes so much time and focus hehe. But i cut them with scissor and the corners with the corner rounder punch. ^_^

[@imo-mq4dj]

have u thought about using a guillotine? @@bymarcissus

[@abena7810]

Hi, how did you cut the cards into curved shapes? This printer isn’t a print and cut right?

[@bymarcissus]

Hey, I cut them by hands first and then i cut the edges with paper corner cutter. You can find it on Amazon o AliExpress

[@abena7810]

@@bymarcissusthank you!

[@BellHwaHwa_Chinadolls]

Printed pictures have lines due to the printer or the paper❤❤

[@StarLostStay143]

Hiii im a huge fan but can you do a stray kids ver

[@bymarcissus]

Hey, I am going to post a video about photocards and one of the card is of Stray kids, please do watch and i will try to make a video of all the members.^_^

[@StarLostStay143]

@@bymarcissus yayyyy thank you but when will it release

[@bymarcissus]

I will post it in 2/3 days. I still haven’t finished it. :(

[@StarLostStay143]

@@bymarcissus sure take your time my notifications are on now everyday super excited 😆

[@DoppsPkin]

just add more padding on the sides... easy fix!

[@neverlookback876]

Hey good morning... Add padding in the side? Can you explain this... I can't work out if the whole page has the wheel lines or just the edge and how would I add the padding x

[@selinaislam4330]

𝐰𝐡𝐚𝐭 𝐢𝐬 𝐭𝐡𝐞 𝐬𝐢𝐳𝐞?

[@bymarcissus]

A4

[@rokujuichi]

Sponsor of oapers pls😂

[@rushita1404]

i have only one question are you indian

[@emiliocoletta1071]

👎👎👎