Epson L 130 blank page print problem solve //EASY SOLUTION # SUJITKUMARBHOI

[@bismillahtravels6816]

আলহামদুলিল্লাহ ভাই। শুভ কামনা আপনার জন্য, মন্তব্য না করে পারলাম না ভাই। ধন্যবাদ ভাই

[@jayantadus1235]

ভাইয়া কি বলে যে ধন্যবাদ দেবো আপনার কারনে কাজটা সম্পন্ন করতে পারলাম অনেক অনেক ভালোবাসা রইলো

[@gobindthecrazyboy]

Keep it up baapa 😘🥰🥰🔥🔥🔥🔥

[@waleedmohamed505]

Thanks so much sir 🙏🙏🙏🙏

[@miragecomputronix7396]

Working tq sir🎉

[@sasmitabhoi2554]

Nice👍👍

[@eshvarsable3140]

Hi sir Mera l110 printer hai uska f1short Kiya tab bhi blank print aara hai

[@Green_spanner]

printer head is ok and flex cable. what if the f1 fuse is OK what is the other component to check?

[@ElektroTech84]

Hello my friend. Your work is very successful, I follow it with pleasure. I have an Epson L3150 model printer and I would like your help with a paroblem. First of all, the power was lost while my printer was running, during the checks I made, I found that the parts of A2222, C6144 and E09A7418A were broken and I replaced them. however, when I power up and try again, a few seconds after the screen lights up and the motors kick in, the motors stop, and then my power supply goes into short-circuit mode to protect itself. What could be the source of the problem? I will be glad if you can help.

[@easysolution5217]

thank u...

[@sanyasinaidusurisetti9984]

Good morning sir, my epson L6170 not printed letters on paper whole four colors only white page come outside please give me solution

[@twahriatakwa2510]

I have the same problem i did like you do and it work for just one time ande return just like it was. I tested the fuse they work fine. What's the problem

[@easysolution5217]

check the head cable and head part

[@StSharena]

Thanks Brother

[@easysolution5217]

ok thank you

[@gobindthecrazyboy]

Hard work chali thau

[@manijaihindh9699]

Thank you

[@easysolution5217]

Its ok

[@rangegamer6884]

After short still blank page

[@Imusicandmovieclips]

❤❤❤👍🙏

[@masudrana-ks4pd]

F1 , after short logic board is dead.

[@wojihollah9410]

F1 , after short logic board is dead,bro

[@shaminthaperera2433]

Dont short it replace with another fuse if you're printer have a short you're board will frie