Epson L3210 Cyan & Yellow not printing

[@philkolang]

It worked. Thank you so much. My cyan ink was clogged, I head cleaned multiple times but that didn't work. So, I followed your instructions and force drained the ink. Just make sure you aren't wearing white shirt cause it was messy.

[@getstarted3766]

Glad it helped

[@6r0k3n5t3ps]

Geez guys before you unscrew whole printer use Wic Reset Utility.. In cleaning section change from gentle to STRONG cleaning then hit Head Cleaning

[@getstarted3766]

performed already and nothings happen, this video was made a day after those so many head cleanings performed. so i decided to perform that procedure. that time i was so sad, afraid and upset because i can not afford to buy another one.

[@getstarted3766]

until now the printer is running well. 2 yrs of service. tips to prolong the printers life based on my experience: kapag ng test print ka tapos may isang line na nawala kahit isa lang sa mga colors ay perform head cleaning agad 1 to 3 times, kinabukasan ok na yan. kung sira pa rin comment ka dito pra matulongan kita.

[@jennyesperida6400]

Ginawa ko na po lahat ng yan wala pading magenta 😭

[@mystybalucan743]

@@getstarted3766 wala pdin po si cyan na color , naka 3 head cleaning na po ako today

[@getstarted3766]

@@mystybalucan743 3x head clean minimum

[@vpkwalker]

thanks alot bro cant express my hapiness in words

[@getstarted3766]

It's my pleasure

[@liukuohao1]

Where do you get the ESPON adjustment program (without Malware involved)?

[@getstarted3766]

@@liukuohao1 in google

[@ghericalma0719]

Thank you. It works perfectly again. It's so helpful tips.

[@jimmyawa6216]

thank you, effective po bumalik yung kulay magenta

[@getstarted3766]

😆

[@MarcLloydLeonardo]

super effective, thank you

[@getstarted3766]

Glad it helped

[@xricardo090]

worked!!! Thank U so much! 🙏🙏🙏

[@ScammerAmputa]

I tried this and work but the cyan didn't print again after a month. What is the possible problem?

[@subarnanath10]

Thank you very much 🙏❤️

[@rebeca9124]

thank you. it helped me a lot.

[@getstarted3766]

your welcome

[@rhinnejetkyle2580]

Very effective! Kudos!

[@vpkwalker]

those who r not getting insert the syringe where tight and pull ok

[@anupgoswami5537]

I love bro worked

[@rasengyao3807]

Print colour even put in black and white of power point slide ??? Please vedio of its

[@rasengyao3807]

Epson

[@getstarted3766]

For now i have no idea how to resolve that issue, just check the printer properties. And select grayscale

[@SalvadorFam2014]

I followed what you did, but still wala pa din yung yellow ink. Ano pa kaya problem kapag ganon? Hopefully mapansin. Thank you.

[@getstarted3766]

Pag higop using syringe Ang ink ba sa yellow cartridge lagpas s half? Then head clean at least 3x, yun lng muna. L3210 ba yan?

[@getstarted3766]

Baka super clog na si yellow

[@getstarted3766]

Or sira na c yellow

[@seanmariano8089]

nahigop ko na po yung sa waste pad and wala po lumabas tas nung icheck ko po yung Y Cartridge, walang ink so hinigop ko po siya gamit syringe tapos head cleaning po 3x tas test print pero di pa din po nagpprint Y Ink

[@getstarted3766]

dapat ang yellow lagpas half level yung caartridge sa loob, then do this (from my own experience) print color while nka open yung scanner cover(lumayo ka kasi nakaka sama sa katawan ang radiation) then head clean. repeat as needed. hindi naman ako nasasayangan sa ink, my printer is in good condition until now.

[@seanmariano8089]

@@getstarted3766 sige po, try ko po mamaya hehe salamat po!

[@getstarted3766]

pg hindi nag success now bukas nman ulit relax mo yung printer, cleaning ulit bukas

[@nixxgg]

thank you lods

[@getstarted3766]

Welcome 😊

[@krystalairefloresrivero7227]

What size is the syringe?

[@getstarted3766]

10ml

[@seanmariano8089]

paano po install yung adjutsment program?

[@getstarted3766]

no need po install, copy lang paste mo sa ibang PC gumagana naman, mahirap lng mag hanap ng software na yan

[@donnalegaspi3218]

Ano po size ng injection na ginamit

[@getstarted3766]

10ml

[@ghericalma0719]

Ano pong size ng syringe na gamit?

[@getstarted3766]

10-15ml

[@elmamagdara-ug1953]

Hello po pano po kaya yung sa l3210 ko. Pag nozzle print may balck ink sa cyan?

[@getstarted3766]

@@elmamagdara-ug1953 drain suck all inks sa cyan using syrenge, pra malinis ulit

[@getstarted3766]

kung may nka mix na black sa tank, kung wla nman, head clean lng yan

[@elmamagdara-ug1953]

@@getstarted3766 nakailang head clean na po e. Basta pag nag head clean then nozzle print na may line dun sa print ng cyan na black

[@getstarted3766]

@@elmamagdara-ug1953 e drain mo kaya ang buong cyan, pro sayang yung ink

[@getstarted3766]

Drain using Syringe suction

[@reymondb.aldave8563]

Ilang ml po yung syringe

[@getstarted3766]

10 ml

[@Kyrranyx]

anong syringe ang gamit?

[@getstarted3766]

yong nabibili sa botika, tag 15-20pesos

[@rosemarie8838]

Anong size ng syringe..

[@getstarted3766]

@@rosemarie8838 10ml

[@getstarted3766]

10ml

[@xennahtenna1911]

Sir paano po kapag walang madala pag suction sa waste ink hose? Walang blue color yong epson l3210 ko po. ☺️

[@getstarted3766]

Wag dun sa waste ink hose, doon sa cyan na cartridge mismo mg higop

[@KcTelimban]

Hi sir! Pano po kaya yung sa magenta ko kapag nagprint ng nozzle check yung border ng magenta ko parang putol putol then kapag magprint na ko ng image pangit na tuloy .. mgay mga lines na kapag may color na red or mix ng red kahit nka high settings na po. Nkailang head clean na po ako and reallignment same pa din. Kakatry ko lang po ng power cleaning and same pa din. Sana mahelp nyo po ako 🙏❤️ thank you

[@getstarted3766]

@@KcTelimban nka experience na ako ng ganyan, pinag patuloy ko lang after mga 3days or so, nqgiging maayos na yan. Pinapabayaan ko lng nagiging ok nman. Wag mo lng problemahin masyado, magiging ok dn yan. Clean at least twice a day, use everyday

[@getstarted3766]

@@KcTelimban di ako expert, may printing shop ako pro never ko pa naipaayos sa ibqng tech 3yrs in service na ito.

[@getstarted3766]

@@KcTelimban di aabot ng 1 week sa akin titino na uli, print ka ng whole page puro red or magenta mga 2to3pages cguro, tapos flush at clean everyday, in my own experience lng yan ha

[@getstarted3766]

Di nman yan taas expense kahit ma drain mo buong magentw tank, 100to200 lng isa magenta, mas mahal pa din labor ng tech, yun nga lng mg hihintay ka talaga ng few days. Di magamit agad, basta sure ka na na suck mo na ng syringe yan ha. Sucktion is very effective.

[@KcTelimban]

@@getstarted3766 dko pa po nagawa yung suction .. head clean lang po tsaka ngayon lang po kakatry ko lang ng power clean then kaka nozzle check ko lang po same pa din

[@trentavik6636]

Paano mag head cleaning,wala po ako yellow color

[@getstarted3766]

kung may adjustment tool ka, gamitin mo ink flushing

[@jonahlynrosales1235]

Sir paano kapag ok nman sa nozzle check. Kpag print ng standard may lines. Kpag high wala naman.

[@getstarted3766]

Head cleaning lng, bukas head clean ulit mga tig 3 to 6 times/day, until ma ok, use ur printer everyday, iwas sa misfeed, yan ang sisira sa head

[@getstarted3766]

May experience ako na ng headclean ako nang gabi 3x kinabukasan ok na

[@fieljonnamaet.7206]

Ngsuction na po ako dun sa cartridge and dun sa my waste pad. Gnun p dn 😢😢. Ano po kaya problem?

[@getstarted3766]

At ng cleaning after? Kung ganon pa din, baka printerhead na ang problema

[@merdesign8637]

I do all the same but still I have a problem

[@getstarted3766]

@@merdesign8637 keep trying

[@seamaster-h1v]

Yellow is not coming, tried sucking from the cartridge, did head cleaning multiple times till date, did a power cleaning today still yellow not coming... I got print head changed last year via epson service, it costed a good sum and now I can't afford to pay for service again...can you provide any other fixes? Thanks ❣️

[@getstarted3766]

this is d only last resort i always perform in every trouble about ink probs, u dont have to change the head coz stock head was orig., if so then change the whole unit.

[@getstarted3766]

i can't provide any fixes,

[@annengsantiago1093]

Ganyan din po nangyari sa printer namin kaso ang walang color yellow and magenta po need lang po linisan pala yan?

[@getstarted3766]

sucktion po s d best nasa video po, cleaning after

[@اوتاكواتايم]

​@@getstarted3766how

[@CharmOne-oz7og]

Wala pong yellow yung sakin. Pwedeng head cleaning po ba muna or gawin na po agad yung syringe? Thank you.

[@getstarted3766]

head cleaning muna.

[@butterflyyyy1260]

Sir paano po kapag blank page??

[@getstarted3766]

same lang procedure magtiwala lng

[@Kaba-kes]

aa sir possible po ba masira agad yun printerhead ng l3210 ee bago palang po 9months palang po saka di naman po gnon kasami yun na print namin sa buong 9months naka 4500 pcs lang naman po kami .bigla po kasi nawala yun kulay ng magenta nong dinala ko po sa technician ng epson ang sabi niya po printerhead po ang sira .may ka totohanan po ba yun sinabi ng technician na printerhead agad ang sira. salamat sa reply boss

[@getstarted3766]

may katotohanan naman, kapag kasi hindi mo rin ginagamit masisira rin ang printerhead kasi mag ka clog yung inks, kaya ako ginagamit ko araw2, kung hindi naman mg head cleaning ka at least once a day/ print lang kung ano2 mas less gastos kesa sa printhead masira. tips: iwasan mo lang mgka paper jam kasi magasgas ang head madaling masira.

[@getstarted3766]

suggest ko lang kung totoong printhead ang sira nyan bili na lang po kayo nang bago kasi mapapagastos ka lang nyan mahal ang printhead, kalahati ang presyo sa brandnew, tapos hindi na orig ang printhead mo. mas madali rin masisira yan. e uwi mo printer & perform this video/ibenta mo na lang much better.

[@Kaba-kes]

@@getstarted3766 aii pala minsan kasi po di na gagamit sir salamat sa reply sir

[@Kaba-kes]

@@getstarted3766 cge po sir salamat po sa suugest po

[@CharmOne-oz7og]

Wala pong yellow yung sakin. Pwedeng head cleaning po ba muna or gawin na po agad yung syringe? Thank you.

[@getstarted3766]

head clean muna, tama ka.