EPSON LX 310, EPSON LQ 310 dot matrix printer setting mode, self test, current setting, installation

[@naulitahasan8275]

The video sound is pretty good, beyond my imagination

[@SolveIT_pc]

Glad you enjoyed it

[@supermasterPIK]

Got a LX300 + II. Is still being manufactured?

[@sarahbennett7533]

so touching for an excellent video

[@SolveIT_pc]

Glad you enjoyed it

[@erynadiaz9716]

Hi thanks for this. But why i on the tear off . Not automatically roll back or load eject down. Pls help

[@SolveIT_pc]

Automatic tear off is used to define continue printing on paper or tear off paper after print. If automatic tear off is "On" than extra paper will be ejected to safely tear the paper.

[@erynadiaz9716]

@@SolveIT_pc hi thanks but continuous non stop need to off😅 how ah

[@hansrasirj9920]

Sir my printer not working in auto mode what is the problem my PLC properly good

[@neilpatrickdelvalle666]

how to set up the printing for Cheque?

[@nileshpatil2920]

Sir , when I try to print , the paper always gets stuck either from behind or from front . I m using 70 gsm paper . Should I go for 80 gsm or is there some setting to be changed in printer ? Can you please help ?

[@SolveIT_pc]

This could be due to high pressure of printer head. Once try to change printer head pressure by using printer head pressure gear located in left side.

[@marryjoybantilan2862]

Hi can we change font size in lx 310? Thank you for answering :)

[@SolveIT_pc]

In this printer you may change PITCH 10 CPI to 20 CPI(Character per inch) but no any direct option for font size. Use printer setting in your computer to change font size.

[@ravinderminocha9581]

@@SolveIT_pc ₹d

[@ajayakumarbs3316]

Sir I am using 6" roll paper.Can I shift left side margin to 1" right.Please reply.

[@SolveIT_pc]

Go to control panel - Devices and printers then right click on printer and click on printing preference. Click on 'User Defined Paper" ,type any name for paper in new name. Here You can set customized paper size and margin as per your requirement.

[@ajayakumarbs3316]

@@SolveIT_pc Thank you Sir.

[@SolveIT_pc]

Like and subscribe my channel.

[@akosimark908]

Hi! Our LX310 printer always had missing lines when printing. Can we resolve this through modifications in printer settings?

[@SolveIT_pc]

Is Printer missing complete line ?

[@akosimark908]

@@SolveIT_pc yes. Its print was always unreadable especially in digits. Example be like that an eight looks like zero due to the missing lines when printing. I can't explain it well, I'm not well verse when it comes to technology. Sorry😅

[@SolveIT_pc]

Printer settings are ok. This is due to printer head pin damage. Go to printer repairing shop. Don't forget to Like and subscribe.

[@akosimark908]

@@SolveIT_pc thanks for your response.

[@marcillevinzon5741]

How to change bold font in epson lx310 so thicker dots can't understand the letters and numbers

[@SolveIT_pc]

your ribbon cartridge might be dry or exhausted. Change cartridge and check print.

[@toonretoon]

I’m having the same problem, I changed the cartridge but is still printing bold letters but last week it was normal, it changed from nowhere

[@SolveIT_pc]

Check printer head pressure located in left side of the printer head moving road. set it to 0 or 1 paper.

[@jaishreeram7383]

Sir my lx printer is not print in digit. Change baut rate in 19200 but not solve the problem.

[@SolveIT_pc]

Change the following Data length 8 bit Parity none Then check character table and international character set for italic table.

[@OLIVAR29]

my problem is the output there is missing line i change printer head but still the same printing i c hange flex cable is also the same

[@SolveIT_pc]

before changing printer head, you need to check 9 transistor CAT-X board. if any transistor is defective, then it will damage printer head. As you mentioned that you had changed printer head. But faulty transistor may damaged printer head again.

[@salmu001]

Bro after printing the invoice ,paper is not coming out completely.. so how can i fix this in settings

[@SolveIT_pc]

Use auto tear off on in printer setting.

[@salmu001]

@@SolveIT_pc i did that… even though it’s not working… how can i send u a video

[@SolveIT_pc]

@@salmu001 share your query with following Facebook page facebook.com/Solve_IT-100842048843057

[@TashaDesriza]

@@SolveIT_pcdimanaa aturnya

[@sumabhavanbheemaram1722]

sir, I use A4 fanfold paper but the printer takes more space before and after print . How do I set it?Please help

[@marishameliyani4266]

Setiap saya print tabel kenapa ukurannya berubah dr print preview dengan hasil print beda size. Tulisan di table pun ikut terpotong. Padahal di sheet kolom tulisan sudah dikasih space lebih utk tulisan panjang.

[@salmu001]

How can i set paper settings 7.5/6 inch to tear it.. for pharmacy printing LX -310

[@SolveIT_pc]

Go to control panel - Devices and printers then right click on printer and click on printing preference. Click on 'User Defined Paper" ,type any name for paper in new name. Here You can set customized paper size and margin as per your requirement.

[@maiaclavite294]

@@SolveIT_pc hi! how can i add paper size in lx-310 printer? when i open printing preference there's no option for customized paper. just LETTER and A4 size

[@Flo-fr4sz]

How can i set the needle to get more into the paper for tattoo stancils? Thx

[@SolveIT_pc]

I don't know it will work for that or not. Try to print with thik paper like photo paper and set head adjust lever at dark.

[@afrinafsanah434]

Hai sir, how to cancel printing the doc when using this printer? Because I notice there are no printing status on window's bar like usually with the other printers.. pls helpp i don't want to waste papers but I can't seem to stop it :")

[@SolveIT_pc]

You can use printer as per your requirement. Normally put your printer offline by pressing Online Button. After giving a print command turn printer online to take print. If you want to cancel any print command than find the printer symbol in right side of the taskbar. Double click on that than select pending print command and cancel. I hope you understand.

[@afrinafsanah434]

@@SolveIT_pc I understand sir.. but there is no printing symbol at the taskbar when I use this printer as I stated previously huhu.. that's why I don't know any other ways to cancel it even the buttons on the printer has no cancel button.. how sir?

[@donnacioco5326]

my printer (LX-310) stack the paper when printing is done.

[@SolveIT_pc]

Please share current setting of your printer to resolve your issue.

[@PHILIPCRAJU]

@@SolveIT_pc sir how can print to small bill

[@SolveIT_pc]

@philip c raju Use specified paper size.

[@robindepedro3257]

How can you change the font size?

[@khamarsayed5614]

Sir, i want my printer to make a gap on the page after the print is done , without the tractor.....

[@SolveIT_pc]

turn On "Auto Tear Off"

[@khamarsayed5614]

@@SolveIT_pc its on , where can i share all the settings with you ....????

[@engyahia3327]

The printer always gives an extra number on its own in every process how to solve that problem

[@SolveIT_pc]

I can't understand what you want to say. Share more detail about your query.

[@nrsnadiaa]

Hai kak mau tanya kalo misal printernya kertasnya malah ke giling keluar bukan ke dalem itu bisa pake setting cara video ini ya?

[@SolveIT_pc]

I am unable to understand your query. Normally if we are using computer paper than put the paper a little bit outside.

[@nrsnadiaa]

@@SolveIT_pc im sorry what i mean is that when i set the paper then i click on the load/eject the paper set up backwards so it cant be printed , and with this problem can i use this video as guide to set my printer back? I hope u get what im saying😭

[@nrsnadiaa]

what i mean backwards is The paper is rolling out of the printer

[@SolveIT_pc]

May you share a snap/video of your printer on fb page facebook.com/Solve_IT-100842048843057/

[@SolveIT_pc]

use paper as I am using in this video. You don't need to press any key while feeding paper. Just hole the paper straight and insert it. paper sensor sense the paper and printer set it automatically.

[@rahulkumarpabxr9045]

सर मेरे ऑफिस में बिल्कुल यही प्रिंटर लगा हुआ है । मेरे लिए समस्या ये है कि जब मैं इससे प्रिंट करता हु तो पेपर पर जो सब्द होते है वो बहुत छोटे प्रिंट हो करके आते है जिसे पढ़ना बहुत मुश्किल होता है कृपया करके आप बताये की मैं किस प्रकार से सेटिंग करू की वो बड़े आकार में छप कर आते plz सर

[@SolveIT_pc]

go to printer setting. then change pitch to 10 CPI.

[@maulanahakim_]

Bang salam sehat Bang mau nanya kalo print 3 halaman, dri page 2 sampe 3 ada space lebih di atasnya, gmn ya pengen sesuai yg di komputer ? Saya set d komputer ukuran kertas A4

[@SolveIT_pc]

Anda juga perlu mengatur ukuran kertas dalam pengaturan printer.

[@adarshsingh3751]

Paper print ke bad 4 se 5 pages automatic paper bahar ho rha hai printer me

[@lamdwidani9809]

Bang kalau current setting nya pada pin test untuk oin 6 dan pin 9 aja yg tdk nyetak itu knp ya?

[@SolveIT_pc]

pin ini mungkin rusak atau papan logika detektif. Jika Anda mengganti kepala printer dengan yang baru, periksa papan logika sebelum mengganti kepala jika tidak, papan logika yang rusak akan merusak kepala baru juga.

[@pankajmalkoti6947]

Nice

[@blackr4v3n]

bang, kalo hasil printnya kaya double2 gitu huruf2nya, knp ya ? kaya kl di priter deskjet butuh calibrasi gitu, gmn ya ?

[@SolveIT_pc]

Kesalahan cetak ganda mungkin terjadi karena resolusi cetak yang tinggi. Buka pengaturan printer di komputer Anda dan ubah resolusi cetak 120*72 .

[@cahayabaru3531]

Bang,sy barusan ngeprint tp yg kecetak cmn kopnya saja dgn beberapa garis..sedangkan resinya tidak tercetak..sy pke aplikasi ipos 4..mohon solusinya

[@SolveIT_pc]

apakah Anda menggunakan printer ini dengan komputer?

[@cahayabaru3531]

@@SolveIT_pc saya pakai laptop

[@SolveIT_pc]

Ini masalah pengemudi. Instal driver dari situs web resmi dan gunakan pengaturan rekomendasi.

[@RameshKumar-iv6gv]

Lx310 printer print very thick how to fix it

[@SolveIT_pc]

Use Font type ROMAN or SANS SERIF.

[@gemsunmarketing3516]

@@SolveIT_pc Hi, same problem with us. We already used the roman and/or san serif, but it is still very thick.

[@priyanshubehera3553]

Speed kese badhae

[@SolveIT_pc]

It is a high speed printer. Install genuine printer driver and use Bi Directional printing in print direction

[@ana-kwe]

Pak, kalau hasil printnya dimulai di kertas bagian tengah dan setiap baris ke 2 ga nyata kenapa ya?

[@SolveIT_pc]

Setelah ubah baud rate dan cetak. Ini mungkin Memecahkan_iT

[@sunryco9855]

@@SolveIT_pc terimakaish sdh dibalas, pak,kalau hasil printnya itu dimulai dari halaman ke2, seperti klu pake kertas continous form print invoice ,kertasnya jalan tp rintnya di kertas ke2,tidak dari awal kertas ke 1 gimana settingya ya?

[@SolveIT_pc]

untuk ini, Anda perlu mengubah ukuran kertas dan margin halaman dan juga mengatur perforasi lewati Mati.

[@gauravjain6562]

How to reset all setting

[@SolveIT_pc]

You can change setting but no any option to reset.

[@SolveIT_pc]

Which types of problem you are facing? Why you are trying to reset setting?

[@engyahia3327]

@@SolveIT_pc The printer always gives an extra number on its own in every process how to solve that problem

[@wandaflorist255]

Di device LQ 310 tiap kali nge print ada 284.4 @ejl itu kenapa ya Gan?

[@SolveIT_pc]

Saya tidak dapat memahami pertanyaan Anda. silakan posting pertanyaan Anda secara singkat.

[@wandaflorist255]

@@SolveIT_pc i had 284.4 @ejl on top when print everything, even print test. My device is Epson LQ 310, how i fix this? Thanks before

[@SolveIT_pc]

@Wanda Florist Generally this error may be due to unsupported driver installation. Uninstall installed printer driver and Install genuine driver from official website or official driver cd provided along with device. If this problem still not solved than share a pic of print on my facebook page. m.facebook.com/Solve_IT-100842048843057

[@gcdriveindustrialcorporati1007]

Sir plesde help po.

[@SolveIT_pc]

Please post your query.

[@matthewtansiongco2555]

@@SolveIT_pcsir, i have problem lx 310 shadow printing, what part should i check or replace? please help thank you.

[@cahayabaru3531]

Pernah ngalamin gk bang ngeprint tp yg keluar cmn garis..yg tulisannya gk keluar..sy print lewat apk ipos 4

[@SolveIT_pc]

Jenis masalah ini terjadi karena penginstalan driver yang dapat dikompilasi.Jika Anda menggunakan hanya dengan Ipos 4, cobalah untuk mengubah tabel karakter atau paritas dalam pengaturan printer.

[@HuyNguyen-qx9bz]

The video sound is pretty good, beyond my imagination

[@SolveIT_pc]

Glad you enjoyed it

[@NguyenVinh-tu5jt]

The video sound is pretty good, beyond my imagination

[@SolveIT_pc]

Glad you enjoyed it