Tap to unmute

Xiaomi Pocophone F1 Screen Repair Guide

  Рет қаралды 119,084

Wit Rigs

Wit Rigs

Күн бұрын

Пікірлер
@EricWitrigs
@EricWitrigs Жыл бұрын
In this video, I will show you how to replace the broken screen for Xiaomi Pocophone F1. Get OEM Replacement Parts For Xiaomi Pocophone F1 : witrigs.com/d7pes OEM Screen for Xiaomi Pocophone F1 : zegsu.com/s/djhuo
@vicmichener673
@vicmichener673 5 жыл бұрын
Tips below. I should have read the comments first and avoided breaking my ear speaker. Mine came off in three pieces and while I pressed them back together, I guess that doesn't actually work. ;-) Didn't realize it was gone until I read the comments below just now, four days later. Will have to order and replace, but at least don't have to go too far in and don't have to remove all 17 screws! ;-) For anyone doing it the first time - it's a bit nervewracking. Hope observations below help (installed the screen with frame). 0:18 Keep screws separate throughout the process. Put the first two in a separate bowl or container from subsequent screws you'll be removing. 0:21 This wasn't immediately clear to me from watching, but the back cover is the flexible part. The main force with "spudger" is pushing it into the gap. I tried to pry a bit and broke my spudger. Got by. 0:47 Remove 17 (count 'em, 17!) screws. Take a picture or map out the screw colours on paper. They are different lengths and colour-coded. Keep these in a separate bowl. 1:16 Signal cable flexes are a bit finicky, particularly when reinstalling. Note that there's a guide clip for the wire just behind the contact at both ends. 1:30 ****See Emanuel Suceu's comments (should be pinned) re ear speaker. After my hassle with it, was going to suggest heat, and it sounds like it works. At that same point, you can see a blue circle to the left. I had what looked like a small, square mini circuit there. It was loose and just lifted out. I moved it to the new screen though I wasn't positive about orientation. 3:07 Kinda obvious, but I missed seeing him connect the screen flex, and of course, the screen wouldn't come on for test. A few moments of increased anxiety. For dolts like me, attach that before testing. 5:23 As mentioned below, replace the two screws removed at 1:19. This is missing in the video.
@ParkourAYCE
@ParkourAYCE 5 жыл бұрын
did your screen break, and you just bought a new screen part from ebay or something and it all worked out good? camera, faceid, everything working? did you need a heatgun
@vicmichener673
@vicmichener673 5 жыл бұрын
@@ParkourAYCE My screen broke just over a month into owning it, after dropping it while only using the supplied "case" and no screen protector. Initially ordered the screen with frame on amazon.ca, but it never made it from China. In the end got it from AliExpress for less than $40 CAD (including tools supplied with screen). Everything working perfectly except the ear speaker, which I broke. (See notes from Emanuel Suceu to avoid this.) It arrived today from Ali. Was worried a heat gun might be too hot, so used a blow dryer. It worked okay, but a heat gun on low is probably good, too.
@vicmichener673
@vicmichener673 5 жыл бұрын
One additional note. My screen did freeze at least once a day after installing, and I had to turn off and on to get it back. I read that the freezing issue was hardware dependent, and I hadn't had this problem on the factory version. I updated the o.s. and it works perfectly.
@ParkourAYCE
@ParkourAYCE 5 жыл бұрын
@@vicmichener673 alright thankyou for the reply man, I'm doing it in a couple weeks when it arrives, I'm nervous so i'll just do it all really carefully
@Proffessionwrighter
@Proffessionwrighter 5 жыл бұрын
Yo after i changed the screen the phone turns on for a second and then straight off again. Any ideas bro?
@dimitrov89
@dimitrov89 4 жыл бұрын
Thank you for the video, everything worked fine and I changed the display. Just a short remark: The two screws from 1:18 are missing in the assembling, the have to be put back around 5:23.
@Livey01
@Livey01 5 жыл бұрын
Thankyou for the great tutorial :-) Actually if it's okay... I would like to add a few tips for other people who are replacing their screen and cover. If you can help it, don't remove the signal cable from the motherboard. Keep it attached to the bottom USB piece and remove it as one piece. Mine broke and I had to make something work with blu tack and some sponge. Also at the bottom where the phone charges, a component was missed. There is a small part with an LED and a sticker (it is the notification LED). Make sure you remove that and put it on your new screen. Also make sure you replace the 2 motherboard screws when re-assembling.. it was missed in the video. Thanks again! Saved me $60 :)
@adamhutton2914
@adamhutton2914 5 жыл бұрын
I've had zero experience taking anything apart phone wise and managed to do this just fine - Even managed to keep the ear piece in sound condition. Just have to be very careful - If parts don't move straight away then care is needed. I used the very small flat head screwdriver to wedge under glued parts. Cheers for the video.
@rammetjeb
@rammetjeb 5 жыл бұрын
I bought the oem screen with frame. Next to that I needed some prying tools, a heat gun, T2 (torx) and regular Philips screwdriver which I for the most part didn't have and cost me another 15 bucks altogether. I didn't fancy prying the screen from the frame so settled for transplanting all inner parts to a new frame. Took me in total 2 hours but I took it very slowly and first time for me doing a thing like this. Snags along the way: - both the ear speaker and vibrator removal took some heat, they were glued as well. - When re-assembling don't forget the two tiny screws in the motherboard. I used some cleaning alcohol to clean camera lenses to be sure before putting back cover back. All seems to behave as new. Happy with the screen and end result. Thanks Wit Rigs, you saved me a bundle
@eltonlucien4280
@eltonlucien4280 5 жыл бұрын
B rammetje how's the quality of the screen? Did you buy it from them?
@magnetized
@magnetized 5 жыл бұрын
Thank you for your video. I've just replaced my 2nd Pocophone screen. Sometimes the back shell clings to the flash-LED and needs some prying and wiggling to come loose. The motherboard cover does not come off easily - it has strong latches at the sides near the top. When reinstalling the battery I use i-phone style (pull to loosen) strips.
@-The-Golden-God-
@-The-Golden-God- 5 жыл бұрын
0:33 I can't get into the side like that. I've been trying for half an hour with various tools and it won't budge. Watched a different video and managed to do it. You skipped the part where you must've used a pick to loosen the edges. You also skipped many parts that require heat in order to soften glued areas.
@estrossa8928
@estrossa8928 5 жыл бұрын
Why r u replacing the glass did it broke or something else happened?
@nitin7218
@nitin7218 4 жыл бұрын
I opened with hand after remou bottom screws.
@EricWitrigs
@EricWitrigs 6 жыл бұрын
Xiaomi Pocophone F1 Screen Replacement: www.witrigs.com/oem-screen-replacement-for-xiaomi-pocophone-f1-graphite-black
@derekwaldner2320
@derekwaldner2320 6 жыл бұрын
when changing lcd with frame, do you tranfer termal paste or use the new termal paste?
@wesleymarques3827
@wesleymarques3827 5 жыл бұрын
This original same ?
@pit929tsakirhs7
@pit929tsakirhs7 5 жыл бұрын
I want the genuine parts
@pit929tsakirhs7
@pit929tsakirhs7 5 жыл бұрын
@@wesleymarques3827 no it's not it's generic
@DerMarmotte
@DerMarmotte 5 жыл бұрын
Which method would you recommend? Replacing the whole frame seems to be more time consuming and you end up removing many small parts, but removing the screen only looks pretty difficult. Also will a hairdryer do the trick if I don't have a heat gun?
@user-uk2gd2zu9b
@user-uk2gd2zu9b Жыл бұрын
It's like 4 years, but just wondering which method you went with and what's the results?
@peNKku
@peNKku 5 жыл бұрын
Ended up destroying my ear speaker thanks to this video... also re assembly you missed one step with motherboard screws
@madshansen4790
@madshansen4790 6 жыл бұрын
Where did you get the adhesive to glue/stick the screen back together again.. can't find it anywhere
@houtarou6720
@houtarou6720 6 жыл бұрын
www.witrigs.com/witrigs-lcd-supporting-frame-sticker-for-xiaomi-pocophone-f1 here it is lol
@jonathandavid1147
@jonathandavid1147 5 жыл бұрын
Any replacement on the adhesive for the new screen or what do you suggest specific brand to use for adhesive on the new screen?
@jadenhamer1581
@jadenhamer1581 4 жыл бұрын
Did you ever end up figuring this out. If so, what did you use. Thanks
@mohdhasrulzulkifli6455
@mohdhasrulzulkifli6455 6 жыл бұрын
does the liquid cooling system integrated with screen? which mean we need to get original screen if replace
@stefangiurgila7807
@stefangiurgila7807 4 жыл бұрын
If I get new screen with frame. Do I need to use new thermal paste when assembling the mother board back??
@ParkourAYCE
@ParkourAYCE 5 жыл бұрын
Do not replace only the glass, I bought a screen and it had a bad connector cable, and the screen would randomly not respond, and now I am buying one with a frame, I'll keep you updated on how that goes
@tishog
@tishog 4 жыл бұрын
Thanks for the really helpful video. A have replaced my screen and it is back to service now. I would recommend your help. The only problem I have faced is that the CPU Temperature now always shows 16.7C while the battery is above 34C. Would you suggest where could be the problem? Thanks.
@basbooy
@basbooy 4 жыл бұрын
1:40 how to you remove the power button so eazy? mine is really stuck.
@efrenzgz
@efrenzgz 5 жыл бұрын
Is the Pocophone Armoured Edition the same repair?
@marians6490
@marians6490 6 жыл бұрын
How about replacing only the glass?
@hamzeaborges3940
@hamzeaborges3940 4 жыл бұрын
You didn't watch the whole thing did you
@rtc7788
@rtc7788 6 жыл бұрын
My glass is just broken. Can I just replace glass?
@d.tyrantgaming2370
@d.tyrantgaming2370 5 жыл бұрын
i regreted i broke my screen..
@nicoolas5000
@nicoolas5000 6 жыл бұрын
It is not necessary to remove the mother, earpiece, power button, ludspeaker or USB port.
@tehcookiemon
@tehcookiemon 5 жыл бұрын
To clarify Mago's comment, you can buy a screen already bonded to a frame (see 2:56), or you can buy the screen without a frame (see 6:03). If the new screen has a frame then you have to move all those parts over to the new frame - that's shown from 2:56 to 6:00 in this video. If you just buy the screen then you don't need to move those parts but you do have to do all the separation and adhesive work - that's from 6:00 to the end of the video. If moving the components to a new frame, this video misses two of them, korean zombie's comment details the one under the USB port, and there's also the front flash next to the speaker, which you can see at 7:16 of this teardown video - kzbin.info/www/bejne/kJy2fZmpnNGfaJY During reassembly - at 5:35, this vid forgets to remind you to put back the two screws that were removed at 1:18 Emanuel Suceu's comment also may have helped me avoid breaking the speaker. I also replaced the thermal paste when transferring the motherboard, not sure whether that's needed, but it's a good reason to not remove the motherboard unless you need to move it to a new frame. Thanks Wit Rigs, the operation was a success.
@ParkourAYCE
@ParkourAYCE 5 жыл бұрын
yes it is because you need to transfer it to the new frame
@berriahanifi7489
@berriahanifi7489 6 жыл бұрын
Nice video ! Doest changing the screen get ride of the screen bleeding issue ?
@EricWitrigs
@EricWitrigs 6 жыл бұрын
No, the screen works properly after replace.
@dennisooki
@dennisooki 10 ай бұрын
Is the Poco f1 screen on ur website that is branded as original, is it tianma or ebbg screen?
@EricWitrigs
@EricWitrigs 10 ай бұрын
OEM Screen
@elcoco8
@elcoco8 6 жыл бұрын
Which kind of tape do you use between the battery and the frame? I broke the original one that came with the phone so I did not put any tape at all. Now I am getting a lot of the "ghost touch" problem which I suspect is due to static. Would kapton tape do the job?
@mrigom1
@mrigom1 5 жыл бұрын
No you need to paste the old frame supporting sticker double sided tape to fix and seal the frame n display properly a kapton" tape wont cut it 😂 It is avail on same site of video ulder i.e witrigs.com exact link w8 herre you go /- www.witrigs.com/witrigs-lcd-supporting-frame-sticker-for-xiaomi-pocophone-f1
@ronaknishad
@ronaknishad 3 жыл бұрын
What about led notification light is it built in display or not?
@KonstantinosEmmanouil
@KonstantinosEmmanouil 4 жыл бұрын
thanks! great guide
@RamblyBear
@RamblyBear 4 жыл бұрын
After watching a lot a Pocophone F1 screen repairs I ended up using the one at MovilOne Phone Repair. The one on this channel involved too many unnecessary steps. You don't have to remove the motherboard to replace the screen on the Pocophone. It's only the battery you need to remove. So you just unplug the things getting in the way of replacing the battery.
@ruisa9894
@ruisa9894 3 жыл бұрын
You havent seen the whole video. There are two different screens, with and without the frame. The video made by MovilOne only refers to the screen without the frame (like in the second part of this video).
@kapilbusawah7169
@kapilbusawah7169 6 жыл бұрын
Do you know where I can get motherboards?
@EricWitrigs
@EricWitrigs 6 жыл бұрын
No, the motherboard is not available for purchase. But you can buy other parts on our website.
@aryavinay777
@aryavinay777 5 жыл бұрын
Is it a good idea to give my Poco phone to general service within 1year of my purchase? Everything is fine except the volume from the speakers is low than it was earlier.
@stam_ehad
@stam_ehad 5 жыл бұрын
Thanks man, that really helped me.
@kapilbusawah7169
@kapilbusawah7169 6 жыл бұрын
You're always out of speakers. I want to get some speakers for the XZ2 but you're out of stock
@eyeteyteras1717
@eyeteyteras1717 3 жыл бұрын
how to remove the port board!?! i dont have heat blower gun i dont even hair dryer as well
@bronzex5broddd482
@bronzex5broddd482 4 жыл бұрын
May i use lighter to heat
@pit929tsakirhs7
@pit929tsakirhs7 5 жыл бұрын
hi my screen cracked but works do I need to buy screen and frame or only screen and where do I find the genuine screen and not a OEM PLZ HELP
@Livey01
@Livey01 5 жыл бұрын
buy the screen and frame, it's easier to replace
@pit929tsakirhs7
@pit929tsakirhs7 5 жыл бұрын
@@Livey01 can I use a damaged phone from water and use it's screen on mine?
@ISHOWSPEEDG
@ISHOWSPEEDG 8 ай бұрын
Is the speaker really hard to take out
@ENGKIMTHIAMA6686
@ENGKIMTHIAMA6686 Жыл бұрын
Where to buy screen adhessive bro
@EricWitrigs
@EricWitrigs Жыл бұрын
www.witrigs.com
@حسين-ج9ط7ي
@حسين-ج9ط7ي 6 жыл бұрын
بارك الله فيكم انتم الافضل دائما
@georgepishilis9349
@georgepishilis9349 5 жыл бұрын
as lots of the comments bellow, i think i broke my earpeace as well. I should have red the comments first. Ordered a new one. Besides that everything went well.
@mamtapandey3103
@mamtapandey3103 5 жыл бұрын
Why did you opened it
@pishilisn8
@pishilisn8 5 жыл бұрын
@@mamtapandey3103 wasn't intentional. I changed my screen and when i had to remove the earpiece it seperqted in 2. I fixed it with a new one, cheaply, but i was without one for as long as the delivery lasted..
@MiracleManGaming
@MiracleManGaming 5 жыл бұрын
Intro too lound noise Rip earphone users
@denelektrieker6851
@denelektrieker6851 5 жыл бұрын
Its a T5 Torx you need.
@prolevi
@prolevi 5 жыл бұрын
Perfect video!
@ajsmilutin84
@ajsmilutin84 4 жыл бұрын
Most of it is good, but you forgot to take out the indicator LED
@davidVAPN
@davidVAPN 4 жыл бұрын
i did everything in the video and when i turned on the phone it is stuck on the no battery-battery charging, anyone can help please?
@cashionsteven5695
@cashionsteven5695 5 жыл бұрын
what if my replace screen doesn't has any of thermal paste ?
@mersh2282
@mersh2282 5 жыл бұрын
Did u figured it out alrd? Wanna change my screen today, not sure about that paste tho :\
@cashionsteven5695
@cashionsteven5695 5 жыл бұрын
@@mersh2282 well, u can put some on the cpu when u replace ur screen, i forgot mine so i just opened at home and at some mx-4 :v
@mersh2282
@mersh2282 5 жыл бұрын
@@cashionsteven5695 Just did it, temps are like -5*C after it :D
@jayjoshi929
@jayjoshi929 5 жыл бұрын
can i put third party super amoled display on my poco f1?
@KungFool
@KungFool 5 жыл бұрын
Sadly no. No part like this is made and the phone doesn't support the voltage for it anyways
@meki___6881
@meki___6881 5 жыл бұрын
Ok why did you take almost the wohle smartphone apart for the screen replacement? OK the screen is the wohle smartphone. Do you need to repaste the cooling?
@joelnitzsche5400
@joelnitzsche5400 3 жыл бұрын
Hello, I replaced my screen two month ago and it worked just fine. Unfortunally after one month the coulors started to blurr. After a while the whole screen flickered and went black now. However when I lift the screen in a certain angle it works but the touch wont work. Has anyone an idea what can be done to fix it? Cheers!
@tarekkannan1331
@tarekkannan1331 4 жыл бұрын
what exactly did he do except taking it apart. so to fix my screen i just need to take it apart?
@ishanbaichoo7294
@ishanbaichoo7294 4 жыл бұрын
You can get the screen as just the LCD panel or as a "full assembly" where the screen comes glued to the middle plate of the phone. He took the guts from his phone, transfered them to another screen+middle plate and snapped his original back on.
@JordiGillet
@JordiGillet 4 жыл бұрын
The two bottom screws are T4, not T3!
@Jimmz
@Jimmz 5 жыл бұрын
I have the same colour poco🔥
@hello_world_zz
@hello_world_zz 5 жыл бұрын
thanks!
@mohammedshafi9585
@mohammedshafi9585 6 жыл бұрын
mi pocof1screen is broken its available in market
@nicoolas5000
@nicoolas5000 6 жыл бұрын
es.aliexpress.com/wholesale?catId=0&initiative_id=SB_20181203154413&SearchText=display+pocophone
@nicola5698
@nicola5698 2 жыл бұрын
I replay the already disassembled and then disassemble it again. Ignore Xiaomi's hidden screw seals and super strong double-sided tape. If a beginner tries to see this, your POCO will surely die.
@padiyans6554
@padiyans6554 4 жыл бұрын
My poco f1 has not working after the flash...pls help me....
@DaevLC
@DaevLC 5 жыл бұрын
You forgot the notification light!
@eladguitar
@eladguitar 4 жыл бұрын
Their screen, which is stated on the website as "original" isn't original, be aware! Mine broke while i was attaching the back cover, and has no notification led. Tried to get a response from them about it and sent them evidence but they just came up with excuses. They are crooks.
@ac34116
@ac34116 Ай бұрын
on step 7 my battery started fuming :(
@raulpocophone5685
@raulpocophone5685 5 жыл бұрын
No sirve para nada tu video, gracias
@gerobrandes2206
@gerobrandes2206 5 жыл бұрын
anyone know what to do if the black wifi cable just ripped the connector off? hahah..
@nawangop7491
@nawangop7491 6 жыл бұрын
Give me redmi note 5 please
@mahasiswaabadi1045
@mahasiswaabadi1045 4 жыл бұрын
To risk..
@pemburupzuri
@pemburupzuri 5 жыл бұрын
not easy
@artan.
@artan. 2 жыл бұрын
lmao and people comlaining about apple making their iphones harder to fix the screen. dont get me wrong I never owned an Iphone but I've fixed some for friends and its way easier than doing all this shit..might aswell buy a new phone..
POCOPHONE F1 SCREEN Replacement
7:22
MovilOne Phone Repair
Рет қаралды 268 М.
Xiaomi Pocophone F1 Screen Replacement
16:42
GSM İletişim
Рет қаралды 35 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 36 МЛН
Restore a broken Xiaomi Poco f1, I bought it for 5 $ ;)I
12:46
SOSTITUZIONE DISPLAY XIAOMI POCOPHONE F1 | REPAIR | DISASSEMBLY
25:01
Il Tecnico Riparatore
Рет қаралды 14 М.
How To Replace Screen LCD On Pocophone Xiaomi F1
13:25
Thepcphone
Рет қаралды 3,6 М.
Xiaomi Pocophone F1 Screen Replacement 🇬🇧
21:10
GSM İletişim
Рет қаралды 59 М.
xiaomi poco f1 display replacement / teardown  /easy method
8:35
Cell-phone Garage
Рет қаралды 15 М.
Xiaomi Pocophone F1 Screen Replacement
15:43
GSM İletişim
Рет қаралды 7 М.
POCO F1/X3/M3 BACK COVER REPLACEMENT AND BEST CASE ONLINE
10:15
CHINito LEGACY
Рет қаралды 15 М.
Xiaomi Pocophone F1 Battery Repair Guide
3:40
Wit Rigs
Рет қаралды 61 М.
Pocophone F1 SCREEN LCD Replacement
14:23
Fix Your Phone
Рет қаралды 41 М.