Cutting Edge Bullets - SHOT Show 2023

Visit my website:
erikcortina.com/
Sign up for my private forum to learn about reloading, wind reading, long range tactics, and more.
www.shootsmallgroups.com/community/
Get my shirts here:
www.shootsmallgroups.com/merchandise/

[@RatelLaw]

Thank you for sharing

[@bdhabets3250]

Guy seemed like a nice guy answering questions. Not sure why people have a problem with the guy.

[@gastonhoule9021]

I prefer a guy a littel bit shy than a guy spiting bull shit none stop ! Their bullet are absolutly devastator on deer ! 😊

[@andyprairiedog4829]

I'd like to see Erik do his bullet-drilling-with-a-lathe trick on these Cutting Edge Bullets 😆 That was a great video and I was wondering how in the upside-down-world would that be making a bullet more accurate...got me on that one.

[@brandonparrett2436]

Johnnys reloading bench did these years ago

[@3dprintvideos148]

Erik, it would be cool to see you shoot a few of these at 600 and 1,000 yards. I won't tell Berger ....

[@baronofid]

We will be getting Eric some bullets to test.

[@emoryzakin2576]

Just tried cutting edge this year, accurate and absolutely murder white tail

[@mikedematteo8918]

Thanks

[@danielpatterson836]

Would like to see Eric test some of these.

[@Shadow_banned_again]

@erik cortina I would like to see you put them to test at 1,000 yds. A comparison of them, Warner Tool, and Badlands would be great. I’ll buy and send you 50 of each if needed.

[@mejia1133]

It Will be a good video

[@vikp6115]

We're you holding a gun 🔫 when you took interview with that guy , he was so nervous like me on my first date lol

[@RyanBrown-fp3vk]

Extremely consistent.

[@johnbolinger5089]

I am quite surprised reading the negative comments that have accompanied this interview clip. Mr. Smitchko may not have given the standard of interview that several on here would have liked, but I would not be so dismissive based on such a short clip. The bullets he has produced have been nothing but terrific for me. I use his bullets for their ability to produce consistent, accurate and repeatable results. I have used various designs from CE over many calibers, and I have been more than happy with the results. I would imagine this man has a wealth of knowledge in regards to ballistics and machining. Perhaps he simply is not a good public speaker, or just maybe he has difficulty trying to relay the technical information in a way that the rest of us can understand.

[@benbowditch9265]

They're amazing bullets, Daniel isn't kidding about consistency.. But the same could almost be said about most properly manufactured monolithic's. "The most winningest extreme long range bullet there is out there in the world.." 🤣They moved from PA it ID this last year.

[@baronofid]

Here is a list of the ELR matches we won just last year in the U.S.. Cutting Edge Bullets ELR Match Wins in 2022: • Unholy Alliance (2nd Annual) match • FCSA Record Match Spring Canyon • Raton Thunder 1.64 Mile Challenge • Moccasin Valley Precision • Sand Creek 4K • Thunder Valley Precision (6/18) • Conquer the Castle • Thunder Valley Precision (7/16) • FCSA Record Match Spring Canyon • Raton Thunder 1.64 Mile Challenge • Thunder Valley Precision (8/27) • Spearpoint Ranch ELR (4/23) • Spearpoint Ranch (Rookie or 2 Mile) (4/24) • Spearpoint Ranch ELR Rookie (5/15) • Spearpoint Ranch ELR (6/18) • Spearpoint Ranch ELR Rookie Match (6/19) • Spearpoint Ranch ELR (7/16) • Spearpoint Ranch ELR (8/13) • Spearpoint Roundup Finale (9/17-18) • Moccasin Valley Precision • "Poke The Bear!" - Black Bear ELR • King of 2 MIles Global Finals Not only are we winning but in many of these cases 80% + of the shooter in the match are using our brand and in the last King of 2mile 16 of the top 17 shooters.

[@unknown_blank_blank_blank]

Hm. Seneca's are similar, and make a pretty wicked splatter.

[@user5.56]

this company is amazing!!

[@user5.56]

customer service 👍

[@charlesm.2756]

Interesting company. Checked out their products. They look like very high quality and I'm sure they perform fantastic...but damn!!!!! Almost a buck per pill? I guess I'd buy them...if someone else was paying for 'em😅

[@JacksonMalcolm]

I believe PVA makes the cutting edge bullets... maybe it was warner tool but I've shot the PVA's and really like them. The speed and BC's make for jaw dropping results. Almost can't belive what you're dialing/holding.

[@SOGEDOG]

They make flat line. Solid copper

[@nikkicroasmun5066]

Cutting Edge Bullets makes their own bullets.

[@baronofid]

We have no affiliation with PVA

[@mikekonn3456]

Cutting Edge Bullets had an amazing 22LR bullet in R&D 3 years ago. The bullet would have revolutionized the 22LR long-range community. Where is the bullet now? I have sent several emails over the years and no new information.

[@baronofid]

We sell it on our website and you can also get it at Scheels and a bunch of online retailers.

[@mikekonn3456]

@Brad Johnson When I contacted Cutting Edge Bullets, I specifically asked about loaded 22LR ammunition. Ready to shoot ammunition is a more viable product for most shooters who lack the special equipment/materials to reload 22LR.

[@jamesklink4698]

Nice. #!!! 😊😊😊

[@fishlife1013]

ERIK I LOVE YOU YOUR MY HERO AN SHIT

[@EagleRun23]

did this guy have any idea who you were?

[@KK40384]

If I was on the fence about these bullets and this guy had to talk me into it all I can say is YIKES. Solid pass

[@spacepathfinder1]

maximus very lethal but makes meat damage

[@joeldubose5762]

The Hornady Atip bullets has shown to me that consistancy isnt all that their is to bullets. Absolutely not saying that an Atip shoots poorly. It's just what happens to a bullet when it's going down a barrel and as it leaves the barrel, combined with the possible advantages of a lighter bullet . This could be an interesting test for a benchrest rifle.

[@AutopilotAndChill]

A-Tip isn’t a hunting bullet though, it is a target round. These are made to smack animals not steel or paper.

[@bille5399]

So, nope. I think I'll stick with ELD or Berger

[@MountaintravelerEddie]

I do wonder the difference in these bullets compared to my 175 grain Sierra’s for my .308 I think this guy need to read a fuckin manual Seems a lot of new kids to long range chase the damn numbers…..and get the latest and greatest….. Meanwhile I’ve been shooting .308 since 1994 and I know that 175 like the back of my sack….some kid came up with a new 6 Creed….he had a hard time at 300 yards…..and I was using the “3 oh hate”……he asked me about what rounds and all of the technicals. I was shooting my M40A5 with the SOCOM suppressor. It shot better then his rig. We had 34.2 mph crosswinds from a valley at 400 yards….28.5 mph left to right winds at 600 yards. This kid had some experience, but was new to the game. I’m sticking to the .308 Always available, reliable and I’ve been reloading it for 25 years Semper USMC / Retired

[@SurmaSampo]

Noting you wrote has anything to do with the video. Drink less before commenting.

[@danielv7964]

He seems confused 🤣

[@jamesgang94591]

ELR. What?? Come on man. Typically you load to stay supersonic through your target.

[@davidandre886]

Lol. What stays supersonic to 4K?

[@Buckshot1217]

This dude was high or something

[@tinfoilsombrero1439]

I don’t know why folks need Ric Flair to sell them stuff. Listen to what he says and not how he says it.

[@baronofid]

lol

[@maxcoatlhunter4322]

Hum..interesting..I wonder if F-Class John has seen this video?

[@unknown_blank_blank_blank]

Oh God... The goal is to keep John in the game, to have a friendly face, not bankrupt the man :(

[@maxcoatlhunter4322]

@@unknown_blank_blank_blank LOL 😅I'm trying to save John time so he doesn't have to weight and trim bullets 😁

[@jameswalters4358]

They failed putting that nervous guy there for selling. He was less than persuasive.

[@johnkaraphillis754]

I concur. As a hunter/shooter/loader, he could have been a tad clearer on the specific details of their bullets, specifically the structure difference in hunting and target bullets.

[@dougderoy]

He’s the owner. Owner/geniuses don’t always make the best sales guys or public speakers.

[@mydangname]

Am I the first view.

[@brunoterlingen2203]

This guy had no clue as to whom he was talking to, a shame really to be so out of touch.

[@thelaw300]

The man’s body language was pretty off-putting. Maybe he had to do a #2.