Error 16: Is it my Printer Head or Carriage Board.?

[@richwords1]

As value added feature, we built a chatbot that can answer all questions on Large format machine issues. Ask it anything about the subject. It knows. Trust me. By the way, you can order parts in the app as well. Tell us your experience with it. We can make it even better. mediafiles.botpress.cloud/87b4fb76-8490-45bd-a846-7d362593cbc4/webchat/bot.html

[@PrintshoppeArtsandDesign]

we already tested 1. the printhead 2 the flex 3. the board. there all fine. chip is not yet tested. waiting for spare to arrive. hope it will work for my machine. by the way, thanks for the upload :)

[@richwords1]

How did you test the boards. Hope you also tried them on another machine before concluding they are fine

[@anhnguyenanhnguyen]

Mua hàng kiểu gì

[@onyinyenwandu2736]

Hello, thank you for the great resources you post here. Truly appreciated. I’m having issues with ghosting prints or double printing (usually the yellow prints first a few lines of the loaded design and then continues printing the job. I’ve done all I know to resolve the issue but it stops and then restarts when I turn on the printer for another day’s job. Would that be the main board, chip or printhead? I really need your help as I’ve spent alot paying “technicians” to come and fix the printer.

[@audenararanguren2551]

Veo que después de reemplazo de un cabezal y cinta vuelve aparece y se soluciona al encender y reacomodando el flex, qué puede ser no está saliendo ni test o color no hala tints

[@ZeldrisBlack]

cuando instalas un cabezal nuevo, se recomieda cambiar tanto cables, como cap, mayormente no chupa tinta cuando ya esta desgastado tu cap. solo cambialo o ajusta tu cap de uso, subiendo mas, desde el menu de tu plotter. si de plano no jala tinta...cambialo y dejalo al nivel que estaba.

[@reglanet]

Hello, my machine has: "Error 3 Head COM timeout"..... Is it possible that the fault is with the car plate fuses?

[@ismailamusa4596]

Am overwhelmed

[@richwords1]

You're welcome Sir. It's one of those seasons. It too shall pass.

[@nanterashidah6916]

Hello thx for the video update for my printer has error 12. What could it be? Thx

[@richwords1]

kzbin.infokxGFWThTQC4?feature=share

[@richwords1]

Check that video above

[@richwords1]

It is now 20usd for consultation..

[@supremogamingofficial]

My machine does not print nozzle checks, no ink. I tried insert and reinserting flexcable. What might be the problem?

[@richwords1]

If you have connected the printer head cable properly and still no ink. Then the printer head is likely damaged. Sorry about that. I sincerely hope you have been using the printer head for a while and so have made enough money to cover the loss.

[@Fg3435]

I've bought like 4 xp 600 printer heads and no luck either the heads are crap and plugged up I need help trying to find 2 new heads please

[@richwords1]

What happens to the heads normally

[@Fg3435]

Well they got clogged up and wouldn't get unclogged. So took it off and ran cleaner threw it but when I connected it back I received an error 16 on both original ones and ever since that I bought 4 and they all come clogged. I troubleshoot to see if it's the mother board by disconnecting the heads and everything ran smoothly but once I put the heads on the error 16 comes back

[@richwords1]

So getting clogged means they come clogged.? Or your left it for a while then they get clogged.? If you bought a new print head and they get clogged immediately on installation then maybe it's bad. But your definition of getting clogged may shed light on the nature of the problem too Sha.

[@Fg3435]

No they came clogged I put them in the same day and tried it out

[@richwords1]

Have you tried pulling with a syringe to see if ink will come through into the syringe.? If not. Install the print head into the machine and do that first. If ink is coming out just fine. Then we're looking at an electronic clog here. If you need help with this trouble shoot. You can send me a Whatsapp message. (By the way Whatsapp consultation is a PAID service. It's not free. Since it's time dependent.

[@conejocongloboslp1059]

Hello friend, I get error 16, even when disconnecting the heads, when performing tests or cleaning.

[@richwords1]

Carriage may be faulty

[@jgop1729]

Head board problem

[@jgop1729]

hi , i got error 16 on my xp600 dual head printer,after fixing the flat cable ,no error but NO INK COMES OUT WHEN I DO NOZZLE TEST OR PRINTING ,i change head board and printing again ;my question is about the board (sunyung) how to repair the board ,it must be an ic or fuse that have blown ,is someone knew or have a diagram of the board to repair it

[@richwords1]

Do you know how to fix the board if somehow you get a board schematics.?

[@jgop1729]

no but will look for someone who understand diagram to fix it @@richwords1

[@richwords1]

I am asking, Do you know someone who understands the diagram.?

[@jgop1729]

Yes i know .but need the diagram

[@richwords1]

I'll find it. Then let you know. You'll tell him to chat with me when I have it so we can discuss.

[@GoddyArun]

Please I want to me a member to the membership

[@richwords1]

You can click join in my channel abd follow the steps.

[@gojoextra5996]

Hello brother I got issue on mine .. the print head not siting on capping station stops half way. got error 16

[@richwords1]

Send me a video on WhatsApp. Check our terms and conditions for WhatsApp consultation before sending me. Thanks.

[@tefomoselekatsi532]

i have had this problem before,board will behave normall without printhead(known good printhead) and when you connect both you get error 16 second i have when you do nozzle test it comes out faded...still with a known good printhead

[@richwords1]

Not sure the print head is okay then. Some printer heads are refurbished.

[@mikeekeocha2359]

My flatbed moves as it should. I have purchase another print board and 5 printheads. Four of which are refurbished from eBay. I got the last printhead from an Epson printer untested. but still didn't work..

[@richwords1]

I suggest you test the print heads in another machine and see.

[@FANNIEMCMILLAN-fl4mn]

Hello my printer reads comm error, link fail, power down, maintenance mode Please help I have a locor

[@richwords1]

Either the long white cable that links the head board and the mainboard or it's the head board. Link fail is your machine saying I can't see the head board.

[@princestephen5207]

Show me how to fix it bro

[@beachcinityclothing3907]

Hi , how do I contact you guys? I need help with my dtf machine.

[@princestephen5207]

Y_printe: print (stagnate)

[@md.faisal8522]

Brother pls give video how to password remove mainboard

[@richwords1]

Wow. Honestly I don't know. Have you contacted vendor.

[@olracx]

i replace my head 5 times alrady it will not take 1 month we change already the head board and head what is the problem is it the maon baord?

[@richwords1]

Yes. Mostly this is a problem of main board