Error Code C6400 KYOCERA M2040DN ✓ This is The Cause

KYOCERA ecosys m2040dn photocopier machine

[@dianalarasati-ow5ck]

just found out about the c6400 error case, the reason for lizard entering the machine, thank you friend the knowledge is very useful

[@fajarshidiq-sz3fl]

Ini ternyata salah satu penyebab eror c6400 mesin kemasukan cicak selain listrik yang tidak stabil pantesan sudah pakai stavolt masih saja eror kasus seperti ini persis mesin saya bang coba saya cek kemungkinan kemasukan cicak juga, terimakasih sudah berbagi ilmu 👍👍

[@channeltv3661]

This video is very useful and helpful. Thank you my friend good luck for the future

[@hajifaisal-oj5ef]

Sangat bermanfaat bang

[@TomyAlfian-ux4gm]

Penyebab eror c6400 lainnya apa gan? Selain short karena ulah si cicak

[@KarsoSangliTV84]

Voltage listrik tidak stabil Thermistor rusak Thermostat rusak Power supply rusak

[@aguscandra-fp8ph]

power supply jadi short gegara cicak mati sampai gosong

[@MrFisiha]

Kyocera p3150dn printer error 6400 problem how to solve

[@KarsoSangliTV84]

CODE: 6400 Description: Zero-cross signal error While fuser heater control is performed, the zero-cross signal is not input within 2 s.Causes:Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Power source PWB (YC3) and engine PWB (YC1) Defective power source PWB or engine PWB. Replace the power source PWB or the engine PWB and check for correct operation.

[@RudiHartono-wb8up]

Gara gara cicak masuk ke mesin mesin jadi eror