Error EC20 Part 2 With 8" Vertical Screen (previous model) Redline Embroidery Machines

[@DenaliEmbroideries]

I checked everything you told in the video. I had some a fresh look at my machine, and a broken wire started working. Add it to your condition and results.

[@cafengalapi]

Where is the stop position sensor located on the double head machine?

[@JeanGoulart]

Congratulations on the videos. Do you have a video showing how to change the 2:48 time mail?

[@isayc2208]

Do you have a video for EC19 error, please?

[@SunilKumar-bz7hh]

Hey Can you please post the video of changing the main motor?

[@chitraselvam422]

My machine shows generatix overvoltage error even at a 214volt along with main motor timeout error any suggestion pls

[@СтаниславЖуравлев-и3у]

What could be the problem if such an error not at startup, but after a few minutes of working.

[@findel4]

Possible the stop position sensor.

[@kamelchikhabelgacem5502]

I have problem the machine not stop postion 100° just 104° what is the problem ???

[@RedlineEMB]

It cloud be the stop position sensor not working properly or the notch of the stop position sensor metal disk is not properly calibrated . With a clean qutip clean the stop position sensor to see if this fixes the issue if not verified the notch of the metal disk to see is between the 2 magnets of the sensor and the main shaft at 100 degree. if not calibrate the disk.

[@kamelchikhabelgacem5502]

@@RedlineEMB Sensor stops in the notch completely

[@kamelchikhabelgacem5502]

@@RedlineEMB i have problem axis main sheft not stop 100°

[@kamelchikhabelgacem5502]

@@RedlineEMB Machine pointer is incorrect 104 °

[@kamelchikhabelgacem5502]

I think problem in the encoder : .(