ERV & HRV Units Explained

[@minitrekjatim]

Saya kesini setelah lihat komen om joy di chanel sebelah, masih terkait matic...mantep tips2nya, terutama pas nyimak alasan kenapa jangan sering pindah dari D N DN😊

[@islam56898]

Good explanation, loud music

[@hottubking1229]

Yup, turned it off after 30 secs of watching. Too bad, looked interesting.

[@TinaWavelet]

Thanks god captions exist, i had to turn the volume down coz of background music

[@goetzfrank4090]

Next video please without music. What you think might be uplifting and fun might just be bothering and annoying for the next person. This is about information. Thanks. Good info.

[@networkedperson]

this video's background music isn't loud and annoying enough

[@DrLachlanFetterplace]

Great video. Really clear explanation. One question: So with the ERV - is there some air exchange or how does the humidity get exchanged? If there is air exchange how to you clean exhaust air before (or after) it mixes, as it will have high co2 and airbourne virus particles etc? With a HEPA filter or similar for virus's? That won't scrub the co2 though will it?

[@DragonsWrath886]

This other video explains it better ( kzbin.info/www/bejne/h4C2lp-LgJuXprM ) but the material in the exchanger will be different. in an HRV where only heat is exchanged, the material will be metal, while an ERV may have a a cloth-like material (or silica?) that will wick away humidity from one air stream and will be picked up by the other. For the other question - filters. CO2 shouldn't be a concern since you're only exchanging heat. The exhaust air is still exhausted, unless you're using a system that returns some portion of the exhaust air, in which case you'd limit that return air accordingly.

[@phillichillin1716]

Thanks for this, finally getting my head around it

[@GaddarKerim1]

How does ERV remove moisture?

[@drodriguez394]

Mechanical cooling

[@malludxb2019]

So what is the diffrence compre with FAHU

[@baijopaul]

Any option to use in Church ? What about the cost factors ?

[@kasijanor]

Hi, nice presentation! How did you calculate 18°C? 21°Cx0,8=16,8°C? What am I doing wrong?

[@mark33545]

what do you use in North east where its very cold but also very humid in the summer?

[@sceschia]

Does anyone know how to connect this to Ecobee Smart thermostat?

[@Jacob-uy8ox]

How do you do the actual energy calculations according to the temperature difference and volume rate of air?

[@airchange255]

We have a program that calculates this sort of thing for us. In this case it takes the change in enthalpy (kj/kg) between the outside and inside condition and multiplies it by the mass flow rate (kg/s). So we have (34.8 - 18.6) x 1.26 = 20.4 kW

[@zacharyrollis8455]

@@airchange255 These numbers aren't in the video

[@airchange255]

@@zacharyrollis8455 Yeah, we didn't want to include enthalpy numbers as it might just confuse people. Calculations like this probably deserves its own video

[@TheOneTrueMaNicXs]

Can the units run without exchanging heat? I'm form Texas where we have big temperature changes. Can I for example exchange heat during the day when it 95°F(35°C) and just exchange air not heat when it's night and 60°F(15.5°C)?

[@aliyehya5521]

By Exchanging air you mean rejecting the exhaust air and have 100% outfoor air, this is called Economy Cycle and it’s part of AHU design using motorized dampers connect to BMS system or HVAC controller. Erv and HRV are strictly for exchanging heat and humidity

[@ernestoc36921]

Could you please turn up the music? I can still hear the narrator

[@shepherdboy9692]

QUESTION: I am designing a house to build in Canada, so heating and cooling are necessary. I know an ERV is code and also good for air/humidity quality and health. If I were to choose a forced air furnace, would that be a completely separate set of duct work than the ERV? That would be a lot of duct work. With installing an ERV, what is the best whole-home cooling option? I'd be happy with hydronic radiant in-floor heating... but I also want whole-home AC and my design is not conducive to mini-split wall mounted heat pumps. So if I do a ducted forced-air heat pump... will that be a separate set of duct work from the ERV?

[@Mikeeryza]

It’s better to contact the company directly via phone, not thru youtube p, to get an answer

[@nuvo-gq9iu]

If I'm in a house and I find a unit how can I tell if it is an HRV or an ERV by looking at it? I looked up the model number but the model comes in both HRV and ERV versions and I couldn't find any labeling that stated one or the other.

[@CJZ964]

Usually the HRV has a metal core. ERV has a plastic/ceramic core (unsure of the composition 100%)

[@mohamadrifai3580]

I am in Togo Africa and i need to install units but its very large its around 7152 square meter factory, and if i install this type how do i know the temperature inside the factory with 3ACH(air change per hour around 151000cfm) because i think if i change the air more, then i will arrive to more equal temperature with the outside air.

[@zeeshanshah1573]

Is there a 4000 cfm of fresh air i can get in with this

[@hottubking1229]

Yikes, are you trying to ventilate an apartment block?

[@desmondliao]

Is there a solution for a condo unit that has too much condensation in cold Winters?

[@airchange255]

Yes, a small residential sized HRV should help. Condensation occurs when air comes in contact with a cold surface and gets cooled to its dew point temperature. So to eliminate condensation, one of the following (or both) needs to happen: A) the moisture content of the indoor air needs to be reduced (to lower its dew point temperature). B) Or the temperature of the surface needs to be increased (to prevent the air being cooled to its dew point temperature). On a cold day, ventilating a room will lower the moisture content of the indoor air. So using a HRV will help with solution A. But firstly ensure that the source of internal humidity is being controlled - are bathroom, kitchen and laundry exhaust fans working properly? If they are and condensation is still occurring, then continuous ventilation from a HRV may be needed.

[@TinaWavelet]

When will people learn not to use any background music in educational videos?

[@ItIsGonnaGetWayWorse]

Random question: There is this random light switch-looking thing in one of my house closets labeled "CRV". Anyone know what its for?

[@mike02454]

Corpse Removal Vehicle. Don't flip that switch with your closet door closed.

[@RavarsenBlogspot]

Why is this not more commonly known

[@PaterJoyce]

785 Schmidt Key

[@odoroku950]

Rmit student here 🤣

[@ShirleyRobinson-h8o]

496 Armstrong Fields

[@Sunxfan]

GOOD,IS IT USE EC CENTRIFUGAL FAN ?

[@RonaldSmith-w8q]

Cassin Extensions

[@tjalerkon3680]

I don't know why the heck people play background music in such learning videos!!

[@jacquelinesinclair9475]

Please repost this without the music

[@beckysmith7517]

Hey I have a question? I have a 200 square foot tiny house with closed foam insulation and because I also use it as a greenhouse in the winter time and of course because of transpiration of the plants and evaporation of the soil after a watering… on top of two adult people breathing, I am getting a lot of humidity in the winter time. I also live in the SW Virginia area so we have pretty humid summers here too. Which system would work best for this application and HRV or ERV? I know both clean the air Im just more concerned with excessive humidity. I see a lot of people in tiny houses using HRV but what do you think I should do. Also I am looking for a very small unit… any ideas there because its again only 200 sq ft?

[@airchange255]

Hello, in this case removing indoor humidity during cold conditions should probably be your priority. This is because indoor humidity will condense when coming in contact with cold surfaces (walls and windows etc.). Condensation on surfaces can result in mold growth and building damage. Therefore a HRV will be best for you. It will ensure the humidity that is generated inside gets exhausted outside. Whereas, an ERV will recirculate some of the indoor humidity. We don't deal much with small residential units. But, you'd probably need a unit that does an airflow of approx. 50 CFM

[@ThomasClark-s6m]

Emile Roads

[@BettyWhite-r1w]

Lucinda Creek

[@AnilKumar-gc6qc]

Background music is too loud not able to understand what you are explaining

[@JoanEddins-j8y]

Rath Well

[@ColeridgeNewman]

702 Nikolaus Centers

[@IvoPavlik]

Came because of info Ran away because of music

[@andrewhicks6494]

You sound like the guy from that KZbin channel with the telletubby looking things that shit everywhere

[@TravisLemay-j2s]

Ankunding Ways

[@mech.engineerhayelnabil246]

Music is very annoying and not helping to understand the vedio

[@weltbestevideos]

Nobody wants to hear this background trash music. It's trash. You paid zero for it and it sounds like zero. I will not watch this even if the product may be killer.

[@MichelleJohnson-g6h]

Hertha Valleys

[@jaysheat631]

I'm an HVAC contractor...this is BS

[@Burritosarebetterthantacos]

Id love to know how you arrived at this conclusion.

[@jaysheat631]

@@Burritosarebetterthantacos are an HVAC contractor also? I'd definitely love to explain

[@Burritosarebetterthantacos]

@@jaysheat631 Shoot. Ive done hvac for almost 20 years.

[@jaysheat631]

@@Burritosarebetterthantacos oh so it not a contractor...no sweat, u should still understand what a micron is ...look up what the size of the coronavirus is in micron's and compare that to the filtration of this device

[@frankly2677]

@@jaysheat631 this unit is built to exchange air not purify it. For that you would need whats called an “air purifier” lmao.