ESP32 CAM Arduino IDE with Sketch Installation - Artificial Intelligence with Facial recognition

Install Arduino IDE on Windows 11 And ESP 32 CAM Facial Recognition Camera Configuration.
0:06 - Download Arduino IDE - www.arduino.cc...
0:11 - Installing Arduino IDE
0:14 - Running Arduino IDE
0:23 - Installing drivers (automatically)
0:37 - Installing the Arduino-ESP32 from here espressif-docs...
1:10 - Installing Espressif ESP32 boards package
1:40 - Selecting the AI Thinker ESP32-CAM board
1:50 - COM serial port config
2:00 - Loading an example (Camera Web Server)
2:30 - AI THINKER ESP32-CAM on COM4
2:40 - WIFI network credentials
3:08 - Loading the sketch
3:12 - Opening the serial monitor
3:30 - Camera ready! Use IP address.
3:52 - Connecting to the camera
4:00 - OV2640 camera menu
4:11 - Facial recognition demonstration

[@Abu_Khalid-]

Can u make ocr digit reader with that

[@chenzora2417]

Hi, I have been following you. You do a great work. I work for NextPCB. We would like to sponsor your projects. You can send a DM for more details.

[@icXu]

Thanks @chenzora2417

[@neilcorbett5057]

I can't get mine to work. Message :'A fatal error occurred: Failed to connect to ESP32: Wrong boot mode detected (0x13)! The chip needs to be in download mode' every time I try. Other esp cam board I have ( Esp cam WRover) does not experience this problem using same IDE and computer.Please help if you can.

[@icXu]

Hi Neil, try to keep one of the buttons pressed during programming. Also, try to isolate the fault. If possible by using the usb PCB with another esp. Please let me know how is going, I will help you to solve the issue

[@neilcorbett5057]

@@icXu Thanks for replying so quickly. Button press didn't work. I'll get another esp32 and give it a try with the pcb usb as you suggest. It'll take a couple of days to get one.

[@icXu]

@@neilcorbett5057 thanks Neil, keep me posted. Kind regards

[@neilcorbett5057]

@@icXu Tried programming it with an external FTDI adapter, instead of the cam -mb base but still won't work. Also tried altering the flash mode settings. Maybe the cam board is faulty. Tied various combinations of button press on the base. Still getting wrong boot mode detected.

[@icXu]

@@neilcorbett5057 most likely that the cam board is faulty, if you bought it from me, please message and I will send you a replacement