ESP32 Tutorial: Using 2.8 Inch SPI TFT LCD Touch Display (ST7789 & ILI9341)

[@YellowPurple]

*ESP32 & 2.8" TFT: Displaying SD Card Images & Fixing Color Issues!* kzbin.info/www/bejne/eH3ceZmJjLxsocU

[@aripjamaludinrumi]

Thanks for the video... I've tested the ST7789 and worked perfectly with both esp32 and wemos D1 Mini. Next I'll try ILI9341.

[@RixtronixLAB]

Nice,thank you :)

[@ishwin8697]

Hi, i have tried connecting my 2'8 inch ILI9341 to the Arduino and Esp32 but i am only getting a white screen. I have installed all the libraries and files from Github but still its white. The instruction manual mentioned that i have to solder J1 at the back otherwise i will only be able to use 3.3v instead of 5v. Do i need to attach resistor on the CS/RST/DC/SDI/SCK connection?

[@GoodPersone]

I love بسم الله الرحمن الرحيم ❤

[@VictorBorah-Invincible]

Bro, can I use a 3.5 display and follow your instructions?

[@RanjithS-g9z]

Bro esp 32 marauder

[@YellowPurple]

The Easiest Way to Install ESP32 Marauder: Step-by-Step Guide! kzbin.info/www/bejne/eoXGaX6uZqiUh9U

[@كلشئ-و3ل]

You should buy a flipper zero... following from yemen ❤

[@YellowPurple]

Great suggestion! I’ve been curious about the Flipper Zero, but it’s a little bit expensive right now. Hopefully, I’ll get it next time! Thanks for your support from Yemen! ❤

[@jumbo999614]

My SD card doesn't work if I use the screen with ESP32. It gives error like "Folder not found" even I already format it correctly. I also already tried SD card with different capacity. If I use it with Arduino Uno/Nano, there is no problem. I found solution on the internet and it say you have to solder connection on the board which labeled J1 to bypass voltage regulator. I haven't tried that and I afraid it might fry both of my ESP32 and TFT screen. The same SD card problem also happen to my ST7735 if I use it with ESP32/NodeMCU ESP8266.

[@6406peter]

does the version of TET_eSPI library affect the LCD touch Display V1.2? the LCD touch Display in video is v1.1

[@jumbo999614]

In my opinion, I don't think it doesn't matter as long as you wire it correctly and edit library setup file correctly.

[@jasimurrahman6729]

Bro make a video T display esp32 ❤😊

[@YellowPurple]

kzbin.info/www/bejne/nGqmn513h8SaeLc

[@jasimurrahman6729]

@@YellowPurple bro how I can make Wi-Fi deauther with t display esp32

[@Xavier_Everwhere]

Bro, make esp32 nes emulator using this display

[@jasimurrahman6729]

bruce firmware for nodemcu esp8266 and esp32 t display ❤😊

[@jasimurrahman6729]

Bro I want to contact with you