ESP32 Tutorial - Using Servo Motors ( NEW Arduino IDE )

Servo motors are inexpensive little output devices that can be perfect when you're designing something that needs to move. Today we'll learn how to hook it up to an ESP32 Board and Control it from the Serial Monitor!
● Playlist Link: bit.ly/3TdXiq5
● Introduction to ESP32: • Introduction to ESP32 ...
● Serial Monitor( NEW Arduino IDE ): • ESP32 Tutorial - How t...
♥ Don't Click This! : bit.ly/3jvI8g6
--------------------------------------------------------------------
FOLLOW ME:
● TikTok :
/ enjoy_mechatronics
● Facebook: / enjoymechatronics
● Github: github.com/Enj...
--------------------------------------------------------------------
► All content by Enjoy Mechatronics is 100% free. I believe that education should be freely available to everyone.

[@EnjoyMechatronics]

Don't Click This! : bit.ly/3jvI8g6

[@dewexdewex]

I had a day of compiler issues with this library. I found the following Board Manager versions worked on Mac OSX: Arduino ESP Boards: 2.0.13 ESP32: 2.0.14 On Arduino IDE: 2.3.3

[@yakoubghilani7842]

thanks bro that change my life

[@moeyali123]

Thanks bro, super simple and easy to follow. I subscribed.

[@EnjoyMechatronics]

Thanks for the sub!

[@zaiiimo2882]

BROOO THANK YOU U SAVED MY LIFE!

[@EnjoyMechatronics]

No worries 🙂

[@johnicebourne217]

hi bro, do you have tutorial if i am using a expansion board

[@marklee1209]

Great and clear explanation! 👍

[@EnjoyMechatronics]

Glad you think so!

[@DavidGomez-bc7rn]

Me gustó tu intro

[@chellalialhcen]

Hi Bro, i didn't know that you have an english channel !!! HMD i've found it by coincidence. thank you a lot

[@EnjoyMechatronics]

No problem 👍

[@harunyz]

Thanks Bro

[@apluscichlids]

Can you adjust the speed of the motor turning to the set point?

[@int-Mikke]

Thanks

[@EnjoyMechatronics]

No problem

[@Wawan_Setiaw4n_Robotik]

Good tank's very much..

[@EnjoyMechatronics]

No problem 👍

[@natarajking7674]

Super explain bro

[@EnjoyMechatronics]

Thank you so much 🙂

[@daffafaturrahman4122]

Thanks brooooooooooooooooooooooooow

[@adautoVianna712]

tank you! muito obrigado!

[@fleezfreeg]

Can you verify the servoMotor.detach(); function will move the servo toward 0? I have a project where I need to set the initial position to 90°. To save battery life and de-energize the servo I tried using ,detach(). but when calling detach() the servo is moved back toward 0° away from 90°. It seems the PWM is not stopped before the servo is detached causing the position to be changed. Has anyone else noticed this? can you suggest a workaround to prevent this from happening? Good tutorial BTW! Thanks

[@TalhaRana123]

try parsing 180 instead of 0

[@jomfawad9255]

I keep getting error this library only works with board avr sam samd nrf52

[@coolstuff1497]

hey could you link the code please it would help a lot thanks

[@zaiiimo2882]

How can i do this with a 360 servo motor?

[@EnjoyMechatronics]

Follow the same steps

[@HitamMAWAR]

did u have servo 360 control by esp32 via bluetooth

[@EnjoyMechatronics]

No, but This video could help you get started kzbin.info/www/bejne/rWavmH-peNqgfKs

[@piuu128]

We use the same board for this but still we getting error for that board then instead of that board which board should we use ..

[@TalhaRana123]

you must use arduno uno

[@DrrHazza]

Hey, I've been trouble shooting my project for 2 days and Ive narrowed it down to this simple setup in the video and my servos do not respond at all, esp def works and wires just so confused, if anyone can help that would be amazing

[@LucidFX.]

nice vid. stupid question, does a servo have an index i.e. 0 - a default start position?

[@FrostyFlankz]

You set the 0 by physically moving the arm to center

[@LucidFX.]

@@FrostyFlankz I have created a mount in cad that once zero is sent for position 1 the mount can be moved to reflect the zero and tightened down and doesn't need to be adjusted again unless, of course you wan to change it i.e. your zero is actually in a different direction , so the sensor base will hold that until you want to change the orientation of position 1 for whatever reason. zero remains zero and each other sensor points in a different position 2 but position 1 is usually in the same direction or compass bearing

[@celsorosajunior7358]

muito bom

[@winhlainghtay]

what is your code editer name?

[@EnjoyMechatronics]

Arduino IDE

[@luisw1552]

My servo is just spinning round and round 🤔

[@rashmithahimath5238]

Hey, did you find a fix

[@luisw1552]

@@rashmithahimath5238 Kind of... i bought a 360 deg servo... they are supposed to do that. 😅

[@babusona5180]

Yess change your servo and try again maybe the gear may get broken​@@rashmithahimath5238

[@Manuqtix.Manuqtix]

Dude hand on I don’t understand the IF thing

[@Srk-sk4nj]

Boss your pinout is wrong

[@EnjoyMechatronics]

I will double check

[@imalallawmkima8081]

So there is no need for the wifi module to exist on esp32😂

[@EnjoyMechatronics]

kzbin.info/www/bejne/nZqpknmMnadljM0