ESP8266 E.v.i.l Twin 2 in 1: E.v.i.l twin & D.eauth Programming & Testing

Disclaimer:
This project is a proof of concept for testing and educational purposes.Neither the ESP8266, nor its SDK was meant or built for such purposes. Bugs can occur!
Use it only against your own networks and devices!Please check the legal regulations in your country before using it.I don't take any responsibility for what you do with this program.
]In this video, we'll be taking a look at the ESP8266 E.vilTwin 2 in 1: E.viltwin & D.eauth Programming & Testing.
The E.viltwin is a great tool for programming and testing your E.vilTwin projects, and the D.eauth feature allows you to easily disable your E.vilTwin boards from online access. Watch this video to see all the details!
Download NodeMCU Flasher + Code
drive.google.c...
Connect to pwned with the password deauther
Preferences link:
arduino.esp8266...
dl.espressif.c...
W.ifi code:
drive.google.c...
Default SSID : E.vil-Twin
Default Pass : YellowPurple
LiLon NodeMCU V3 ESP8266 + Install Driver CH340G or CH341G + Fix FT232R USB UART Driver
• LiLon NodeMCU V3 ESP82...
Diy Twin ESP8266 Wi-Fi Chip With Rechargeable Battery System
• Diy Twin ESP8266 Wi-Fi...
ＬＩＫＥ | ＣＯＭＭＥＮＴ | ＳＨＡＲＥ | ＳＵＢＳＣＲＩＢＥ
=== = = = = = = = == = = = == = = = == = =
== = = = = == = = = = = = = == = = = = = ==
★★ Please like and subscribe ★★
/ @yellowpurple
=== = = = = = = = == = = = == = = = == = =
How to extend w.ifi range with another router wirelessly
• How to extend wifi ran...
How To Program ATtiny85 Microcontroller with Arduino Uno || Programming And Burn Bootloader
• How To Program ATtiny8...
TP-Link To Netgear Router Wireless Internet Sharing || Router As W.iFi Repeater, Range Extender - WDS
• TP-Link To Netgear Rou...
ip camera easy way
• Video
How to extend w.ifi range with another router
• How to Extend WiFi Ran...
ESP8266 D.eauther || A Simple HomeMade Wi-Fi Jammer by using an ESP8266 | DIY Project
• A Simple HomeMade D.ea...
sokoban level 11 solution
• sokoban level 11 solution
Diy Arduino Based Ultrasonic Radar System || Using Ultrasonic Sensor & Servo Motor With Arduino
• Diy Arduino Based Ultr...
How To Connect wirelessly Two Routers On One Home Network Using WDS without cable
• How To Connect wireles...
How to Make Water Overflow Alarm With Led Indicator Save Electricity & Water
• How to Make Water Over...
4 Ways to Turn off a Normal School Calculator Citizen CT-512
• 4 Ways to Turn off a N...
★★=== = = = = = = = ==★★
Contact us for any enquiries :
[e-mail]
rubel1628
★★=== = = = = = = = ==★★
#yellowpurple
#e.viltwin
#esp8266
=== = = = = = = = == = = = == = = = == = =

[@YellowPurple]

*Diy Twin ESP8266 Wi-Fi Chip With Rechargeable Battery System* kzbin.info/www/bejne/m2HRh4eBjJJ2hbc

[@dimitrijerandjelovic9026]

Glad to see someone is interested in my old project :D Sorry for not updating it in a while, I'll get to it soon I hope.

[@crisjunpino148]

can i intouch with you

[@kħ0]

Give your github profile link i wanna see your projects.

[@FffFff-wu2ep]

Batko, ja kad kliknem start evil twin, nestane mi u available wifi taj "devil twin" pojavi se taarget one, i sada kada target ukuca meni taj browser gde sam i zapoceo evil twin se samo zamrzne

[@marcelgordijn1400]

u dont have contents on utube,to back those words up

[@pika6034]

it doesn't work , When I press start it immediately turns off the esp8266

[@KrishGamingW]

Can I use one esp and one wife adaptor instead because a adaptor can also perform deauthentication attack

[@futurebruteforce]

Yes. I will work i have tested it❤

[@berkopasa9349]

I tried but negative. because we are creating 2nd fake mesh. When you create a fake network, it leaves the default twin network, closes and the created fake network becomes active. another person wants to enter the fake network, enters the password, but since we are not on the twin network, the reload option does not make sense. so it gives error. It doesn't show password.

[@bloodwitcher]

Is true. Same here

[@Qiramaya]

How to combine deauther and evil twin in 1 device

[@reloxgamer3114]

In devil twin search on Google devil twin

[@faizoo]

Not possible in esp8266

[@deaderasutaki1376]

​@@faizoohow about esp 32?

[@candrasniper3404]

​@@faizoowhy? The reason?

[@tonkofonko]

Esp32 is more powerful and some times better to use.

[@mangatchakwal]

Thank bro ❤ Can this work be done simultaneously or are both necessary?

[@android2822]

In one video, I seen that the guy used 1 nodemsu 8266 and do both evil twin and deauth attack?? How he do that?

[@YellowPurple]

i also try with one nodemcu, but not success

[@WorkFromHome-th2eq]

See in this channel only use 1 nodemcu

[@alphabetg_01]

No words u have explained it like Mr.Bean without saying a word hats off❤❤❤❤❤❤

[@IrfanSutrisno-s2r]

Thanks Bro, this works. But why can't deauther automatically turn off when the user has entered the correct password?

[@chaudharysajid007]

bro i have only ine in which i add deauth program from my Android its working how i add evil twin attack from Android

[@digitalmarketingwithsobuj9375]

Vai....i want to clear 1 thing. Do you please tell me there need 2 nodemcu? Or just 1 nodemcu is enough for Evil Twin attack...please reply me bro

[@YellowPurple]

2 nodemcu

[@YellowPurple]

kzbin.info/www/bejne/m2HRh4eBjJJ2hbc

[@lykimleng9227]

nodemcu firmware programmer stuck at 0 percent when i click flash f ( help ) 😭😭

[@marcelgordijn1400]

use a bheter cable

[@Freefire-mq6et]

ESP8266NUD Price koto ? Ar koy ta version ? hoy 3 ta ke ? Na aro ?

[@muhammadmoeed1423]

you explained it very well, but it will be appreciated if you answer the failures. whenever we press evil twin attack the nodemcu is disconnected. a lot of people have commented it. it will be appreciated if you can answer it thank you

[@Heang_sivhor]

Me too

[@bloodwitcher]

And me

[@abhinavammu3153]

How to edit wifi name YelloPurple to other in which line code did I want to change

[@AgungGemstone-ld5op]

Can you make the same thing using ArduinoDroid.....because I don't have a laptop or computer

[@jtrix1801]

To done the evil twin program we need a fresh Nodemcu?

[@TheTubejunky]

One to De-authenticate (kick the person off their wifi network) another to PRETEND to be that network with the same name (Bobs wifi for eg). When the person tries to reconnect they can only reconnect to the FAKE WiFi with the same name.

[@jtrix1801]

4:24 why you have so many link URL ?

[@nadirshaikh2897]

brother for me only COM5 port is shwoing and i m using 2 esp and i used COM5 on deauthing now there is not showing of any ports in arduino ide

[@kikar92]

can you do all that with just one ESP8266 ?

[@YellowPurple]

i tried with one esp8266, but not succeed

[@Exploit5lover]

Yes you can

[@danyalahmad2097]

@@Exploit5lover can this jam desktop wifi too ? mine work on android but desktop still connected to my router

[@Exploit5lover]

@@danyalahmad2097 yes this can ! Try again. It can easily jam desktop WiFi as compared to android.

[@its____ayann]

​@@Exploit5loverhow??

[@roni1984]

Cool project and nice video :D I cant make the AP work though, no AP appears after pushing the sketch to my wemos d1mini pro :( do you think you could help? :)

[@Ajobboy]

this can be done by single board i found a video of fb about this but they didn't provided the source

[@its____ayann]

Is this possible with one ?

[@Ajobboy]

@@its____ayann yes finally it worked with 1 esp8266

[@lesudanais5547]

What is the name

[@XBEAST321]

does it do channel happing when deauthing the target bcz its the biggest issue in nodemcu deauthing programs when we attack victims just restart their router by taking plug out then plug in and thats change the router channel so they can connect to their wifi

[@ArteSimples-ed6gr]

Me ajuda aqui, consegui executa evil porem quando digito a senha e entro la mas nao consigo visualizar a senha que foi digitada

[@johnjosesalinas264]

Nice Project. Is this only for ESP8266 or I can upload this to ESP32? Thanks!

[@YellowPurple]

kzbin.info/www/bejne/jGi3npKhoJylarM

[@danyalahmad2097]

​@@YellowPurple please update the ui it doesn't look like real seem fake And instead of asking yellow purple need to be updated it should I ask to connect to the network please enter password beloq

[@Capslock-rh3ln]

@@danyalahmad2097 bro he used NodeMCU ESP8266 v2 is it work for v3 or I have to use the v2

[@-iq8xr]

How do you identify the person who does this method Is this package on GBS to be recognized

[@jeceljayoma43]

How to flash esp8266 to Deauther wifi jammer?

[@YellowPurple]

kzbin.info/www/bejne/jGi3npKhoJylarM

[@joeery5699]

Will it work if i extend the esp8266 wifi? I'm planning to use kali linux as deauther 5g wifi then set the wifi extender name to victim ssid **** 5G@****

[@TheTubejunky]

Good luck with that.

[@jerelcalutan413]

its not working for me. still i can connect with the AP

[@TechnicalDKC]

Can we capture handshake usign same method ?

[@marcelgordijn1400]

beter use a pwnagotchi for capture hand sakes,nice project to PWNAGOTCHI, good luck.

[@WhineyParsley06]

can it be done with an esp32?

[@ansarig8508]

Sir miny draz app sy buy krna hy esp8266 modemcu ya duno ek hi ha na

[@ZEUSxPUBGM]

What if the wifi user inputs the wrong password ?

[@ThroneClan]

if u use only 1 esp?

[@YellowPurple]

2

[@sjude]

Hello brother, how do I program this piece on my phone because I do not have a computer? ❤❤

[@ajay_voicex]

U can do this with ur phone

[@NamasenITN]

Can you share the source code instead of the binary?

[@invisiblehackr5780]

When i connect nodemcu with my loptop.and open flasher. Im not found port like Com3 Com4 but why? After that when i go to device manager for check port option i found there was not showing any port option. I can i solved it sir

[@TheTubejunky]

Check for installed drivers for the nodeMCU or ESP8266. Or your usb port is bad ORRRRRRRR the USB CABLE IS A CHARGE ONLY CABLE...Find one that has DATA + CHARGE

[@gameryousha69]

I will try this to my principal's wifi on my university

[@binodthakur5487]

Awesome video sir I appreciate But I am facing a problem I forgot my nodemcu username and password so how can I changed and got connect to nodemcu wifi

[@RiderRoar433]

Brother it is possible to use esp32 in place of esp8266

[@ilberr]

If you get the answer pls bring me :)

[@cyberx6448]

can this be done with the wemos d1 mini

[@YellowPurple]

yes

[@IoTProgramming]

IOT Gateway, AWS IOT Core, and Lambda lectures are now available.

[@mexpower22]

dont work de 2 one give me an error : fork/exec C:\Users\pc\AppData\Local\Arduino15\packages\esp8266\tools\python3\3.7.2-post1/python3.exe: El parámetro no es correcto. Compilation error: fork/exec C:\Users\pc\AppData\Local\Arduino15\packages\esp8266\tools\python3\3.7.2-post1/python3.exe: El parámetro no es correcto.

[@nathanielbalnig3882]

how to locate the com port on esp?

[@salahmohamed5043]

Hi , when i press “start evil twin “ the network disconnects and I can’t solve the problem

[@eloyas1]

The problem is that it currently DOES NOT WORK. Routers are already protected against these attacks...

[@halfbloodfilchi]

but the problem need to access the router or ssid to disconect the other device

[@roslinda3492]

Can I get paste the link you provided and use a different pissing firmware??

[@crisjunpino148]

can we change the ssid of phishing ?

[@YellowPurple]

yes

[@crisjunpino148]

@@YellowPurple is it working untill now?

[@HAteeqhateeq]

Bro how to change wifi name without programming . . plzz❤

[@MrMyrmidon1986]

very good god but can work this to 5g or only to 2,4g?

[@royal_gopal_king8747]

Sir 1st wala bahut achhe se samgh me aa gya work bhi kiya 1st wala 2nd wala samgh me nhii aaya work bhii nhii kr rha hai

[@Belkacemnotafraid]

its not working the script need more cause its not cut the wifi when launch the attack so fix your script

[@The888Generation]

Anyone?? When I tried attack mode, devices still connected. Didn't disconnect!! Can anyone help!

[@teofredoporpayasjr3532]

can you create auto save D.eauth ?

[@pusaraaksara8658]

please show how to make firmware support display oled 0.96 for nodemcu esp8266 not wemos d1 mini

[@YellowPurple]

kzbin.info/www/bejne/gnSWlpmbrpJ7d6s

[@saaransh_playsminecraft]

Why your cursor is so laggy ??

[@YellowPurple]

Thank you so much for your comment! Stay tuned for more exciting upcoming videos.

[@saaransh_playsminecraft]

@@YellowPurple welcome btw whats the reason

[@souviksaha5936]

the last step isn't working,. after am clicking on START EVEIL TWIN from the 1st phone, the EVILTWIN WIFI IS GETTING VANISHED FORM THE PHONE. WITHOUT THE WIFI HOW CAN I SEE THE PASSWORD?? HELP

[@action_in_technology]

Can i programme it by phone?

[@beingsadib]

please make a wifi admin panel ha*k project by node mcu

[@gesbyn653]

It uses 1 or 2 esp8266?

[@YellowPurple]

2

[@gesbyn653]

@@YellowPurple is there anything for 1 only? which can attack WiFi and copy at the same time?

[@YellowPurple]

​@@gesbyn653 ​i tried with one, but not sucessed :(

[@WorkFromHome-th2eq]

@@gesbyn653 see in this channel ..

[@crisjunpino148]

@@WorkFromHome-th2eq no video

[@danyalahmad2097]

Eveeything ok but UI doesnt look modern

[@SA-ec3yv]

You can code your own GUI

[@danyalahmad2097]

@@SA-ec3yv i try but i meessed it up

[@MdAsif-px2uj]

@@SA-ec3yv how make a vide

[@MdAsif-px2uj]

@@SA-ec3yv video

[@mitchkmn4]

how do you run 2 at the same time if they're hosted on the same ip?

[@TheTubejunky]

You can change the IP addresses in the code. They are not the same. Also one is AP mode.

[@TechnicalDKC]

He has 2 devices connected to different wifi

[@royal_gopal_king8747]

Evil twin ka Password wrong bta rha hai 😢

[@M-ar-uf]

কম্পিউটার বাদে ভাই মোবাইল ফোন দিয়ে কি কাজ করা যাবে

[@AKIRA-i9z]

Boa noite, Ê possivel configurar pelo android psta usar essas funções?

[@tutoriaisdolipe]

Oi amigo, é possível sim, você precisa baixar o emulador de Kali Linux "Termux"

[@AnimeCadaharmy]

It can hack 5G wifi?

[@primoocubill1730]

i dont have pc , can i use my phone for evil twin?

[@skrahul4531]

Yes

[@rsrasel1022]

phone working..?

[@YellowPurple]

yes

[@YellowPurple]

Thank you so much for your comment! Stay tuned for more exciting upcoming videos.

[@musaifshaikh5365]

Assalamualaikum Bhai agar factory reset krna ho to please ek video banuo

[@action_in_technology]

Extern "c" re error please help

[@deathscythe3124]

Is this really work?

[@royal_gopal_king8747]

Sir mera 2 nodemcu khrb ho gya please aap meko script daal kr courier krwa doge please sir 🥺🥺

[@MIRBD]

Password wrong

[@romiyoraja8757]

But its not working on 5g network please make a video of eviltwin attack on 5g network

[@nosimps9206]

I dont think this board support 5g

[@Exploit5lover]

You need powerful adopters.

[@shuhratdoniyev2537]

I try it but, not working

[@UmerFarooq-h1k]

I like your Bismillah!

[@AyushChauhan-ij1ju]

could not find mac address

[@GamerAnia32]

I already know all this , but nice effort and nice video brother , just keep it up 👍❤

[@kasaka7162-Mr.H]

Still can use link???

[@mutegaming3283]

Can i use NodeMCU V3 ESP8266 ESP-12E for flashing wifi jammer?

[@Capslock-rh3ln]

u got the ans is it work for v3?....

[@godgodrobloxbelike4719]

Do yo have setup in mobile

[@mystastusclan]

Mujhe bat karna he apse, kese contact karu urgent he Bhai

[@roslinda3492]

Bisakah saya mengganti ssid itu

[@ArteSimples-ed6gr]

Estou com esse problema

[@SHAHORIYARNAFIG]

Bro bin file link plz phone programme korbo place bro link

[@singsing3039]

my esp shutdown when i try to use evil twin

[@jertsimbajon2812]

Same here how to fix

[@ashher5633]

jammer not working

[@royal_gopal_king8747]

Sir help please password wrong bta rha hai 😢

[@muzammil7688]

How to use in linux

[@CookingCrafts]

Waooaw nice💥💥💥

[@ansarig8508]

Plz sir mujy draz app sy is ka link send kr dy miny buy krna hy

[@YellowPurple]

www.daraz.pk/products/nodemcu-esp8266-v3-lua-ch340-wifi-development-board-i100640051-s1245984711.html?&search=pdp_v2v?spm=a2a0e.pdp.recommendation_1.2.763dHwlcHwlct3&mp=1&scm=1007.38553.252219.0&clickTrackInfo=68053238-61f1-4309-844e-497c794aa62b__100640051__118__i2i__330312__0.1031402__0.1031402__0.0__0.0__0.0__0.0430944__1__null__null__null__null__null__null____749.0__0.0__4.60938__128__749.0__12005__null__null__null__3650.16544_955.3632_4559.21183__null__28556__null__0.0__0.0________null__null

[@primoocubill1730]

what a wonderful project ❤

[@5doolar]

where is the code

[@longy1548]

5:46 where the code? i not found where.

[@YellowPurple]

drive.google.com/file/d/1sqBGvSoTP8QZ73jHQ8kwHqXWaFz5Uwxl/view

[@longy1548]

@@YellowPurple thanks 👍

[@muzammil7688]

How to use in linux

[@MohamedTanoukhi]

@@YellowPurple Hey you can send me the code pleas

[@abdurrakinmandal3920]

Please give the code

[@MohamedTanoukhi]

YAAH SEND IF YOU HAVE BRO

[@godgodrobloxbelike4719]

Using esp8266 loader blynk

[@allnewgaming8089]

Can its possible to do this on mobile

[@YellowPurple]

YES

[@sumitd4u]

Mobile se Deauth and evil twin ho sakta he, without nodemcu ?

[@Zara__writes25]

Superbbbbb

[@YellowPurple]

Much love, bro! ❤❤ Stay tuned for more! 🥰💪

[@tonkofonko]

Dude please MAKE YOUR GITHUB REPO because google drive is from stone age

[@cod2753]

very helpful