ESP8266 NodeMCU Home automation with Google Assistant using Arduino IoT Cloud

[@gedtoon6451]

You are connecting the ESP to 5V and it is designed for 3V3. You could damage it. Where you have 5V connected to the relay module, you should have 3V3. Remove the jumper from three pins at the bottom left of the relay board and connect 5V to 'JVCC' pin.

[@luigicash9821]

hi but is it possible to control everything remotely? that is, away from home? thanks

[@qadeer1685]

Good job sir thank

[@deepbasak5229]

I uploaded the code into the esp 8266, but it has push button code can you make it for switch. And also make that it can remember it's last stage after power cut. 🙏Please 🙏❤❤.

[@AsadAli-mz1ou]

Nice, please make video of 8 channel home automation using KME Smart ....Thanks

[@TechStudyCell]

Noted ✅️

[@iyanamganesh9331]

​@@TechStudyCellwhat can we do with kme serial for extreme

[@LapDoc98]

hi can switch on the switch with hey google

[@LokeshNod]

will relay turn on again if it is on now and power goes out and comes back?

[@vigneshvarma2787]

Can we use normal Switch sir?

[@SubbuJoshi]

Pls make a pcb design video.

[@TechStudyCell]

Okay

[@abdulghofuriswahyudi3777]

Please add library of programs

[@ReincarnationKingFF]

Button switch Kam nahin kar raha please help

[@DivitSeenivasan]

Bro i am a diplamo electronics student and doing a project which is a solar ups system with multi sourse power with relay and controller(Arduino uno and gsm module for sms commands). Can u teach me of doing the relay support and interfacing the controller to power and load. Please bro

[@ankushkumar6809]

1st like and comment from me ❤

[@TechStudyCell]

Thank you

[@vigneshvarma2787]

How to use normal Switch sir ?

[@TechSolutionsPvtLtd]

Bro please make a video qr payment integration with esp 8266

[@rhs-3694]

It is working successfully, but the manual switches are not functioning properly. When controlling via manual switches, a noticeable delay is observed. After turning the switches on or off, the loads remain active for a long time. Additionally, the loads do not turn off even after the switches are turned off. Could you please provide a solution for this?

[@OnlyFor-nh5ng]

How to program esp8266 with Arduino id software

[@hemantdhavale262]

How I buy this project

[@yashkawale4068]

How to check if node mcu is connected with wifi

[@TASNIM-AHMED-SYLHET]

same question

[@CarlosAlbertoCarrera-c9v]

👍

[@vigneshvarma2787]

Push button switch one not working what is the problem?

[@ReincarnationKingFF]

Like number 11

[@giridharan920]

Not able to connect this nodemcu esp8266,

[@saikrishnaboligerla134]

Pls send circuit diagram

[@Vinode01]

Failed to creat things

[@Vinode01]

Bro showing offline

[@saikrishnaboligerla134]

I want code for only one relay bro

[@gopi2670]

68 no line error missing termination caracter

[@gopi2670]

Kaya Karu wifi name Mera 12345678 pasward 12345678 kar diya

[@rhs-3694]

I have got fatal error

[@Vinode01]

😂😂😂😂 TurnnnnOnnn Swith One🎃🎃🎃

[@asexperiment2330]

Sir please help me

[@asexperiment2330]

Sir please help me 🙏

[@CarlosAlbertoCarrera-c9v]

Congratulations on your contribution, so that we can have more knowledge. I tried to see the code, but there is nothing, it is empty.

[@TechStudyCell]

Please download it.. then unzip the file

[@carloscarrera2302]

Hello, I already downloaded it, but when I open the sketch it is empty!

[@omarenabi-h4f]

your explain is bad hear 6:22 broo

[@Radhebhai6222]

Please sir kme smart home automation 8 channel Full testing sir please video upload ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@Radhebhai6222]

Your big fan sir aapka video dekhkar ham business start kar chuke hain

[@DivitSeenivasan]

Bro i am a diplamo electronics student and doing a project which is a solar ups system with multi sourse power with relay and controller(Arduino uno and gsm module for sms commands). Can u teach me of doing the relay support and interfacing the controller to power and load. Please bro

[@FaZiJuTt97]

Bro I can teach you