Whirlpool Washing Machine Error Codes Diagnosis

Whirlpool Washing Machine Error Codes Diagnosis
What do Whirlpool washing machine error codes mean? Find out in this video as eSpares runs through Whirlpool washing machine fault codes and explain what each one stands for! If you have a Whirlpool washer error code, then this is the video for you.
If you have one of the Whirlpool washer error codes on your washing machine and you're trying to figure out what the fault is, it can be frustrating trying to understand what the error symbols mean. Well eSpares are here to help in identifying error codes on a Whirlpool washing machine, including Error Code F05, Error Code F06 and Error Code F08. With this information, you can diagnose the issue with your appliance and jump straight to fixing it without delay!
For any washing machine spare parts you might need to fix your appliance, or any other handy washing machine accessories, head to our online eSpares shop at the link below. www.espares.co.uk/browse/at10...
For more guidance on how to diagnose washing machine control and program problems, you can take a look at our video here. • How to Diagnose Washin...
You can also learn how to make the most out of your washing machine for the best performance at the link below. • How To Get The Best Fr...
Want to skip straight to the information you need? Here's what we talk about in each part of our video:
0:00 Introducing the video
0:14 How error codes are displayed
0:53 The error code FH
1:29 The error code FDL and FUL
1:48 The error code FP
2:24 The error code E4 or UE
2:40 How to access the heater and sensor
3:06 The error code F5
3:23 The error code F08
3:36 The error code F12
3:44 The error code F09
4:01 How to access the motor
4:09 The error code F06
4:26 The error code F07 and F10
4:45 The error code F07 on the control board
4:59 The error code F10 on the control board
5:15 The error code F14, F16, F18, F20, F21, F22
5:32 Suggested video: Energy Saving Tips For Your Washing Machine
Thanks for watching!

[@santiagoclarosmartin8854]

THIS MAN IS FANTASTIC. MAKES COMPLICATED THINGS REALLY EASY. mY 12 YRS OLD HOTPOINT WASHER DRYER IS WORKING AGAIN, FOR JUST 30€. PLEASE DON´T STOP DOING VIDEOS!!! AND THANKYOU

[@eSpares]

Thanks for the comments, remember to 'like’ the video if you enjoyed it or it helped.👍

[@aura2407]

I just fixed my washing machine thanks to you! It was the second error showed in this video :)))) Thanks a million for this video!

[@eSpares]

Thanks for the comments Aura, remember to 'like’ the video if you enjoyed it or it helped.👍

[@hulksmash3854]

thanks for the help man!! but we had to change the entire mother board which cost 3500/- now it's working fine!!!

[@eSpares]

Glad you resolved the problem. :-)

[@integrafreak1]

Thanks for the quality video.Very helpful, Thanks a bunch!!!

[@eSpares]

Tanks for the comments. 😊

[@BracliCreations]

On our Duet, the F11 error was due to an intermittent 3 pin connector to the MCU. I re-positioned pins and sprayed off the terminals with Deoxit. Now it runs like new. Thank you very much for creating this video with emphasis on the harness connectors, you probably saved us $250 in repairs!

[@eSpares]

Thanks Keith for the comments, glad we helped.

[@weAreNotAloneHere]

But there’s no mention of F11 on his video ? I don’t get it

[@Colocsty]

thanks for the video, I was able to fix my washing machine !!!

[@eSpares]

Hi Colocsty! We're glad to hear this video helped you fix your appliance. We hope it’s all sorted now.

[@raegynking5153]

thanks! I just saved myself 500 bucks by watching your video and fixing my washer myself!!

[@eSpares]

That is great to hear Reagyn. May we recommend another couple of videos you may find useful?: kzbin.info/www/bejne/n5e6fGyam5aknck and kzbin.info/www/bejne/q3ylqmBvg6p5a6M

[@4bangerftw]

Thank you! Helped me solve my issue!

[@eSpares]

You are welcome Marc-André, don't know if you have seen this?: kzbin.info/www/bejne/iXe7e4h4rdJroqs

[@bbq2001it]

Thank you so much, I will follow your advice

[@eSpares]

😊

[@SolangeWaithe]

Thank you so much

[@hanyman2009]

Thank you , you save my life

[@eSpares]

Hi hany Man, great praise indeed we are glad we could help.

[@ashokdobariya6567]

Thank you sir

[@juliang.7963]

This is a good video thank you guys 👍👍👍

[@eSpares]

Thanks Julian, if you have a problem remember we also have loads of 'diagnosis videos' for all most appliances like this: kzbin.info/aero/PLZopaZU-UQSHj1noiwEJ99JjXWcEcSAbZ

[@miklosbenkoczy3819]

Very good anyway through your own videos!

[@sujithps6429]

Ur video full send me

[@AyushKumar-oh8pv]

thank you for your help

[@eSpares]

:-)

[@ForrestLtd-yv2je]

Great video by the way

[@furiousjumperfan7622]

Thanks you vidéo wirpool error [ HELP HOTPOINT ARISTON ERROR F05

[@gramos9115]

Brilliant , this guy should be on TV ! I waited for an error code E33 but this is from a de longhi w/m , can you tell me what that would be ?

[@pankajkhurana5772]

Hi, I have a ifb front loading washer, its showing an error code AC HI. Please help, Thank you very much.

[@giuliopoli69]

Please!! I wish I could disassemble the electronic principal board on my whirlpool awo-d6126.. Where is it exactly located?

[@ayoubyacine731]

ال

[@bommaritohawaii]

When you say F9 error code check for leaks inside the machine I'm not sure how you would do that? I'm getting the F9 E1 error code and the system is not draining. I took it apart and there are no clogs or plugs at all

[@t3m0tj93]

How do you fix it?

[@jack310111]

Hi how do I access the pump on my Whirlpool duet front loader with a solid front and no access panel. Thank you in advance.

[@eSpares]

Hi Chris, without a model number we can only give general advice. It is usually easier to lower the machine on its side and access from beneath as shown in some of our other drain pump videos.

[@AttilaAntal]

Hi, I have a Whirlpool Supreme Care FSCR70414 and when power on it displays a code "dEn" (that "n" is like an "U" upside down, so maybe "dE17"). The only option that I have is to touch the start (play) button but in this case I have a random program shown and It happens nothing. At this moment the only functionality is the power of, for any other it just beeps. Do you have a hint what is happening?

[@eSpares]

Check the door lock first, if this seems OK watch this video: kzbin.info/www/bejne/h4qzoqOggbtqqZY

[@letsdoithandymanletsdoitha9747]

Thanks for excellent video... please one question, is same error codes for all whirlpool? Thanks

[@eSpares]

Hi Let's Do It Handyman Let's Do It Handyman, newer machines may have different error codes but generally, they have stayed the same.

[@KL-ie4xm]

Thx

[@katefleming2287]

I have a Duet steam model wfw8640bw1 about 3 years old. The power button no longer works and when I try to start a load the delayed start is displayed after holding start buttons for at least 30 seconds. I have to try several times for the cycle to begin. Suggestions?

[@eSpares]

Hi Kate, you need to watch another video to help identify the problem: kzbin.info/www/bejne/h4qzoqOggbtqqZY

[@markthomasmendoza4162]

Great video... I have a question... What seems to be the problem with my Whirpool dryer... Showi g error code F19?

[@pauledan9934]

checked the heater and senser,working normal Is there any issue in main control board (model no. AWO/D 8712) Whirlpool

[@eSpares]

All modules and PCB's can fail. Before suspecting this just confirm the machine is filling and starting a wash cycle?. Also try a spin cycle. If F08 appears immediately before the cycle starts suspect the sensor or the board.

[@cobix2057]

Hello, I have a Whirlpool machine also and i got a F 05 error. What can i do ? To fix it or repair ?

[@eSpares]

Run a short cycle on a hot wash and check if the water is showing signs of heating. if it is suspect the temperature sensor if it is not check the heating element.

[@pcno2832]

I'm getting an E01/F03 on a new USA-made Whirlpool, which isn't listed here. I notice that many of the unanswered questions below pertain to US-made Whirlpool products. Is it possible that the error codes on EU or UK sold WP machines are different from those of their US counterparts? I know WP bought out Indeset/Hotpoint, so the design of the machine here may have little in common with mine. Thanks for the information anyway.

[@eSpares]

There can be different codes even for machines made for the same 'markets' but the codes quoted are the 'commonly used'. E01 can be a draining problem and F03 can be a pressure switch related error so if you are getting these it suggests the machine is 'expecting' the water to be completely drained but the pressure switch is 'reporting' water in the drum. The usual cause would be a partial or complete drain blockage so watch another video for more information: kzbin.info/www/bejne/nKOoe5uObrijptk

[@ForrestLtd-yv2je]

Hi. I have an error code F23. Any idea what that relates to? Thank you 🙏

[@bizzobrigante1588]

I have a F06 Error and it's not a motor brushes ( they are practically new! ). I've hear in your video @ 4:23 that there is a "Tacho Coil" that might be damaged? Should I check electric resistance of a coil? Thanks in advance.

[@eSpares]

F06 error is no feedback from the Tacho coil. When this normally occurs the drum would start spinning very fast as the motor is powered then slow and stop as no feedback was received. If the drum does not spin that is the reason why no feedback (F06) is displayed and that would be a drive problem.

[@bizzobrigante1588]

eSpares funny thing is that the motor won't start at all?! After taking water the machine just stalls and F06 error pops up. That's why I'm worried that it could be MCU or even CCU which is in my opinion not worth fixing.

[@eSpares]

As previously described no motor rotation no feedback so ignore the F06. If brushes are OK it must be either a connection or a faulty power board.

[@bizzobrigante1588]

eSpares I'll check connections first and then will see from there. .. thanks for help...

[@pablos5332]

I get F33 error code on my Kenmore Elite HE4t, what could be de cause?

[@eSpares]

Hi Pablo, error code F33can suggest to multiple issues related to it, check the water supply first then the pressure switch for holes in the hose and the flow meter is functioning. test the pump with a multimeter and if all that is ok then it is likely to be control unit, good luck.

[@Cv5527]

I have a new washer with codes E01 and F03, what are these?

[@eSpares]

F3E1 error can be a blocked pressure switch hose stopping the machine identifying the water level in the drum. For more information see our video: kzbin.info/www/bejne/aKGsh553rbyGjsk

[@beczijohanna569]

Chris Velez dtdfcdyrgdfdfffdggfgfvgh

[@maria.doloresmendoza363]

Chris Velez

[@maria.doloresmendoza363]

Tengo un código F 28 wilpoo .duet th por favor si puedes darme respuesta cuando es el problema gracias por anticipado una vez gracia.

[@furiousjumperfan7622]

Chris Velez help it's Hotpoint Ariston no spin HELP !!!

[@schakal325]

Hello there eSpares! I too get an F23 faulty code on my top load Whirpool AWE 7516. What should i check? The pressure switch,the heater or the heater sensor? Thank you !

[@eSpares]

We believe this could be due to a couple of reasons. If the error occurs when filling with water it may be a blocked or failed pressure switch so see this video: kzbin.info/www/bejne/aKGsh553rbyGjsk

[@schakal325]

eSpares my problem is that i fill the washer with clothes, pick the program and start it. When i start it, there is NO water coming in, the motor goes twice for a couple of seconds and puff.. the f23 comes on.

[@eSpares]

Hi schakal325, first test the element because if that has failed it may cause the water valve to stop, if that is ok then suspect the pressure switch.

[@schakal325]

eSpares what element? You mean the heater element?

[@eSpares]

Hi schakal325 sorry yes the heating element

[@pembs1]

Hi, I have a whirlpool awz 512/s e and the start button just keeps flashing on it and then it goes onto start delay but it won't enter into any wash programmes. Any ideas what the error might be please?

[@eSpares]

Check the door switch is working correctly.

[@denisestearn5563]

My son just moved into a beauriful town home on the water but so many things are not working properly such as his whiirl pool side by side washer and dryer. The washer works horrible. Everytime he attempts to wash a load of clothes an area code A-09 comes on. He cant open the door and the only way hes able to is if he puts it on the rinse and spin cycle. Which is time consuming and not only that the electic and water bill is going to kill him. Thats one of the issues here that the electric bill is so high tenants have actually moved out.

[@eSpares]

Hi Denise, error code A09 is the machine saying there is a water inlet problem, your son needs to check the water supply and make sure there is water getting to the machine.

[@dranoelwillas6829]

Hello! I have an whirlpool washing machine AWE6317 and work only the motor! I habe doing the reset ine the first the machine takes the water when goes to the second the motor works very fast 2 times and the washing machine stops and 3 light are on! The service light and anothers 2 in program! What problem has?

[@eSpares]

Hi Leonard, we have not found any information and the error codes for your machine, we do not have top loader in the UK.

[@RahanComhaltas]

How about an answer for the E 11 code i have on my Whirlpool Washer/Dryer AWG 349/4

[@eSpares]

Hi autocuntversions, it means the machine has detected an error with the dryer sensor, we have an article to help on this www.espares.co.uk/advice/symptom/hoover-washer-dryer-error-code-e11

[@AHMEDBASEM503]

hi , i have a problem its not responding i have whirlpool 6th sense sport and its displays CE !! what to do?!

[@eSpares]

The CE error is indicating the control panel is not 'communicating' with the control module. Check the connectors are clean and tightly fitted onto the modules, if these are OK suspect one of the modules.

[@ravenj4068]

I wish my machine showed a code. All the lights just light up and it just beeps nonstop. Any thoughts?

[@danski723]

Thanks! 🙏 ( You didn't talk about F23 code...)

[@jponyboyace]

Whirlpool duet f21 code could be a problem other then drainage?..

[@eSpares]

Hi, we recommend checking the drain hose for kinks, check the condition of the drain pump and the electrical connections and check for any blockages inside the drain pump filter,.

[@lostlove4s]

F08 error appearing immediately before any cycle or rotation

[@eSpares]

F08 is suggesting a heater error and is shown here: 3:23 Check the heater and replace if required.

[@navigatorsumit]

What is tsc error in whitemagic 123 top load ??

[@eSpares]

Hi Navigatorsumit, we do not have a list for your model so contact the manufacturer for the details if the error code.

[@jawadamkassou8235]

Hello, what does the F13 code indicate, even though a new lock was replaced and the number is still the same and the machine does not work, the door locks and does not work and the service light is on?

[@lisarenfro1188]

Ok, I've watched this video twice now because the first time I didn't hear my problem.......or the second time. I have a Whirlpool Duet washer and am getting a F13 error. Please advise.

[@eSpares]

Hi Lisa, although we have tried to make this a comprehensive list manufacturers will occasionally add another code. We believe this code is related to a motorised dispenser. The detergent dispenser has several compartments to allow pre-wash wash and conditioner to be loaded at the correct time. To do this it will 'divert' the filling water to the correct compartment. If the motor is jammed or if the control board is not receiving the feedback it will show this error. Check nothing is jamming the motor or flap.

[@ardysuareztv]

I've done everything in the video f21 error is still there . Resetting this model mhn30prbwwo commercial type without coin or card dispenser ,is very hard to find out . I did what you said to unplug the washer for 2 minutes and put it back again .i made several times . No reset is happening washer is not running . What should i check next Ccu or mcu ? Is there any handheld device to reset this .thank you !

[@eSpares]

Sorry we do not have information on commercial machines. The only suggestion we can offer is to watch one of our diagnosis videos that will give areas to check to help identify where the problem may be: kzbin.info/www/bejne/h4qzoqOggbtqqZY

[@ardysuareztv]

Hey Matt, i have a problem with my front load washer Maytag Model : MHN30PRBWW0 it shows error code F21 i cleaned the draining system and even replaced the pump . And the error code still there. Is theres a way how to reset the error codes my self .?please help thanks

[@eSpares]

We believe F21 is a drain error and will occur if the machine takes too long to empty. Unplug the machine and wait for two minutes to reset. Then check the drain cycle and make sure the machine can empty . If it takes a long time see our video: kzbin.info/www/bejne/nKOoe5uObrijptk

[@hughesgaragedoorsystems5893]

Well. I checked the connections of the water supply and cleaned them out. Then checked the dispenser compartment for clogs.Massaged the hose just in case a blockage was there. None. I didn't check the solenoids because I don't have a meter. Pressure is ok but still getting 3 beeps. The major is filling up to proper level of water. Water pressure sounds good. I cut down the hose on the back so water would drain properly. Still no good results....HAve anymore Ideals?

[@eSpares]

The information you have given suggests you may have a pressure switch problem. For information on this see another video: kzbin.info/www/bejne/aKGsh553rbyGjsk

[@promochamaker]

I dont get any power in whirlpool awo/d 4731 what to do???

[@AyushKumar-oh8pv]

my washing machine shows de error and sometimes Fe error please help

[@eSpares]

Hi Ayush, you did not give a model so I can only give general advice. DE usually indicates a door error, check the door closes correctly and if it reoccurs suspect the door lock. Error FE is usually a filling error. Check the machine fills to the correct level in the right time (about 1 Minute), check the water supply tap is turned fully on.

[@denniemcbrayer2740]

What part did you say f06 was? Thank you.

[@eSpares]

Hi Dennie, F06 on a whirlpool washing machine refers to a door lock fault.

[@younghector8987]

But I have one whirlpool dryer Meanshinne it's show me error f06 what will I do

[@eSpares]

At 4:09 we explain F06 is a 'motor tacho problem' this is where the control board does not recognise the drum motor is turning so can be caused by motor brushes if it is not turning or the tacho coil if it turns fast. For more information see another video: kzbin.info/www/bejne/pKTXeGBmitR6m5o

[@golo5000]

Can you tell me what a F08 and E01 error means and how to solve it. TIA.

[@eSpares]

This is a 'water supply error' where the machine does not think it has filled enough in the allowed time. For more information see our video: kzbin.info/www/bejne/jISXaXqVmNx2jtE

[@ShabbirAhmad-xp1km]

Siemens washing machine gives E 003 error what the problem plz tell

[@eSpares]

Hi Shabeer, we do not recognize the error code E0003, can you give us some more details of the fault and model and look at this video for help kzbin.info/www/bejne/hqetnaSFn6xpi8U

[@user-pm3iy1qz1b]

شكرا على الشرح ، عندي سؤال: أعمل في مجال الصيانه الالكترونيه للغساله ولدي غساله تعمل بشكل جيد وعند الدوره السريعه تقف عن العمل وتكتب F8

[@eSpares]

مرحبا, يشير رمز الخطأ الخاص بك إلى وجود مشكلة في السخان قد تكون دائرة مفتوحة ، استخدم مقياس متعدد لاختباره للتأكد مما إذا كان قد فشل.

[@themimis435]

Great video. I had f01 issue which got fixed by replacing the control panel, and it worked for 1 day and then start showing me error f31. any guidance?

[@eSpares]

Hi The Mimi' s, F31 means the machine has detected the motor control unit has overheated, check the connections from the motor to the central control unit and test the motor to determine if it has failed.

[@themimis435]

@@eSpares I did and they are fine. now it is showing me new error f-28. Did I burn the motor?

[@eSpares]

Hi The Mimi' s, F28 is a communication error between the boards, try this Unplug washer or disconnect power. Check wiring harness connections to the MCU, the motor, and Central Control Unit (CCU). - Check connections of the CCU board within the housing. - Make sure all grounding switches are engaged. Check that the serial harness at the MCU is not mounted upside down. The wires should be to the left when facing the MCU connectors. Check the drive system for any worn or failed components the plug in the washer or reconnect power.

[@hone148]

hi, I'm getting a 5d error code, I cleaned drain out an found some debris. ran the machine in quick cycle an still 5d error code at the end of cycle, I repeated 2 more times same result, I then proceded to run the clean cycle with bleach and still 5d error code at end of cycle. I have the model WFW-8410. in your opinion is it the Pump failing or maybe a sock clogged in hose behind pump??

[@eSpares]

Error SD is usually indicating suds or excess foaming in the drum. This is usually caused by to much detergent so if it occurs run another rinse cycle and try reducing the detergent. If you suspect a drain problem watch our diagnosis video: kzbin.info/www/bejne/nKOoe5uObrijptk

[@hone148]

I clicked the link and there no video available

[@eSpares]

Sorry, sorted now: kzbin.info/www/bejne/nKOoe5uObrijptk

[@sarathkeerthi]

i wanna know how to rectify PE error!! pls help me

[@eSpares]

PE is a pressure error, this is where the machine thinks there is not enough water in when filling or if there is still water in when emptying. If it fills correctly and empties correctly see another video: kzbin.info/www/bejne/aKGsh553rbyGjsk

[@lilfireballz]

i got an F5 error code top load whirlpool washer

[@abbeysomethingnormal7830]

lilfireballz same. I think mine is belt. Oddly, it seems to spin etween wash/rinse but it does spin at all after the rinse cycle. Machine was not cheap and only three years old.

[@rowenaflorendo2382]

My wash mach always dispalys e1 during the process

[@eSpares]

Hi Roen, error E01 refers to a drain issue, check the filter and pump.

[@evelynstice6751]

What does F1 mean? I know it has something to do with the lock cause mine is locked, and I can't get it open. It's not the control lock. And I have had it unplugged for at least 5 minutes.

[@pauledan9934]

I have Whirlpool machne 6th sense and i got F08 error what can i do?

[@eSpares]

F08 is a water heater fault. Check the heater and its connections. For more information see another of our videos: kzbin.info/www/bejne/fKXQaZ96i7uqaKc

[@jacquimcalinden-wall8868]

Hi, I have a Whirpool HDW 1011WG, halfway through the program the window flashes H then F, then H then F continously. Then select pause reset button and time comes up 21 mins and pump runs continous and won't move on from there

[@eSpares]

The FH error is indicating the machine has a problem with filling. Check the water supply is correct .

[@bukkyakala9257]

I'm getting f9 E2 what problem is that?

[@eSpares]

Hi Bukky, F9 is described in the video at 3.43 which refers to a leak has been detected so check for a leak.

[@EightGernBlanston]

When I remove the cover it let's out a scream. What should I do... hit it?

[@eSpares]

Sounds like you need to call 'Ghost busters' lol.

[@ShabbirAhmad-xp1km]

Hello my whirlpool washing machine Giving F 26 Error how i solve?

[@cfauvel]

Ok help...model wfc7500vw2...getting an F07 code....I think itis the control board....no matter what cycle it will fill/drain and spin, but near the end will stop and display F07... I tried the Drain/Spin cycle and it is a 18 minute cycle...it drained, spun slowly, then spun VERY quickly numerous times then with 1 or 2 minutes left it would display f07. Would you concur that the control board is the issue?

[@eSpares]

F07 can either be a motor problem or a control board. Before suspecting the board check the carbon brushes for wear and the connections to the motor are not damaged or loose. For more information see our video: kzbin.info/www/bejne/g3-sn32abM-ma6M

[@cfauvel]

thanks, but if the brushes were bad, would the motor spin up to a very high speed, numerous times during the drain/spin cycle?

[@eSpares]

We cannot tell you how to check if a control board is intermittent, but you can easily check the motor brushes and connections. If the tacho winding has a poor connection when the board tries to turn the motor it will not identify any rotation. It then increases to maximum for a moment before shutting down in case of damage so this may be what is happening.

[@cfauvel]

ok I will give that a try , can't hurt and like you say, easy enough to check

[@eSpares]

😊

[@specialrepair]

hello I want your assistance I want the diagnostic test for the washing machine whiripool awoe 91200 dos recc thanks

[@eSpares]

Sorry we do not have information on any specific test program but suggest you watch some of our diagnosis videos like: kzbin.info/aero/PLZopaZU-UQSHj1noiwEJ99JjXWcEcSAbZ

[@specialrepair]

ok thanks

[@micheljubran3427]

hi, thanks for your awesome video! I have a WFW9050XW03 but it doesn't have a LED display, how can I decipher the error code ?. it is stuck on Wash, beeping 3 times, and the LED on the WASH flashing 8 times and then once and then repeat. thanks a lot!

[@eSpares]

Hi Michel, the code is generated because the fill sequence is taking too long, check the pressure switch hose that runs from the tub to the pressure switch as this can cause the problem.

[@micheljubran3427]

@@eSpares Thank you very very much! will give it a shot and update ! really appreciate the quick response and help! you totally rock!

[@hulksmash3854]

it is whirlpool magic 6th sense 7 kg, fully automatic

[@eSpares]

Sorry that is not the model number but the 'type'. PE usually relates to a 'pressure error', this is when he machine cannot identify the amount of water inside. The water when it fills pushes air up a hose to the pressure sensor to tell the machine it can stop filling and start washing or has finished emptying and can start spinning. For more details see another video: kzbin.info/www/bejne/jISXaXqVmNx2jtE

[@queenieboss8011]

F3 E1 front loading whirlpool washer. Please help

[@eSpares]

Hi Queenie Boss, we believe an F3 E1 error code to be related to a pressure switch/sensor issue as the machine cannot detect the water level. There may also be a problem with the appliance control unit or associated wiring.

[@alesiapeshku3777]

Hello! i got a f12 error. could you please tell me how to fix it? thank youu so much in advance

[@eSpares]

Check the heater with a meter as it is likely to have failed.

[@eSpares]

F12 is usually a heater error so check the element. If this is ok the problem could be the control board.

[@xebec4145]

Hello! How do I fix f-08? Thank you!

[@eSpares]

Hi Zad, F08 is a heater problem (likely to have failed). We have a video of the repair on a similar machine that should help you carry out the job: kzbin.info/www/bejne/oJbcmJ6dn7doZsU

[@xebec4145]

eSpares oh thank you. later i will try to look at it if it's the heater. I did some research and some said it could be wiring problems. mine is a whirlpool btw.

[@meritahasani4771]

i have a whirpool with code 23 ?? what does it mean. ?

[@eSpares]

European models generally use F23 to indicate a pressure switch fault so see this video: kzbin.info/www/bejne/aKGsh553rbyGjsk American market models error 23 can be a hot fill or heating sensor problem.

[@hulksmash3854]

PE error always displays, in my washing machine??

[@eSpares]

What is the make and model number of your machine?

[@mistyhensley9609]

hi I'm getting an f7 e6 also f5 and e1 not sure about this one but it's an f0 and e0 please please help

[@eSpares]

We believe F7 E6 error is a motor drive problem and F5 E1 error suggests a lid switch problem so check there areas.

[@arjeanvillodres7420]

Whirlpool 6th sense has U4 error code, what does it mean?

[@eSpares]

Hi arjean, we don't have U4 listed so hopefully somebody has come across it and can put i on here.

[@pearteddwards4172]

How to fix a f3 problem

[@ScreenPrintR]

I have a Whirlpool Duet Front LoaderLF. Already replaced the Flow pumps and sensor. No resolve. Anyone know what to check. Someone changed the Main Controller no resolution.

[@eSpares]

What is the problem and what does the machine do?. Watch our diagnosis videos to identify in what area the problem is likely to be: kzbin.info/www/bejne/h4qzoqOggbtqqZY

[@ScreenPrintR]

The Error I get is LF when the cycle attempts to drain in any cycle. We have to press the Power button at which time it drains itself. After the washer drains, the power shuts off. We than move the knob to Rince, and press the Power again, and Start. The system will rinse and drain. We've replaced the Flow/Inlet Pumps with no resolve. Also someone else with similar issues, same error code, replaced his MCU with no resolve.

[@__sadiiksha___2467]

Hi I have got DE error code.....what I must do?

[@eSpares]

Sorry Hari, we cannot find information on a DE error code on a Whirlpool washing machine.

[@hurtadomalu]

Please help!!! F22 error whirlpool washing machine.

[@eSpares]

Hi Maria, F22 refers to a door lock issue, check the door has closed correctly and make sure the washer has not been overloaded pushing the door open.

[@cdfarah]

Hello, I have a whirlpool sports 6th sense. It's washing fine but lately I have noticed that loads are going on for far too long. For example there will be 1 minute left on the screen then it goes back to 30mins rinsing over and over again. Eventually I will manually reset and do a rinse cycle to finish off. Please help!

[@eSpares]

Hi cdfarah, start by checking if it is draining the water correctly and this may interrupt the programme, also test the heater as that may be a issue.

[@s11039858]

What does error 551 or SS1 indicate? Please advise

[@eSpares]

Hi Ashneel, we do not have either error codes listed on a whirlpool washing machine, you will need to contact the manufacturer but please let us know how you get on.

[@DEE-jz7cy]

What about FA error code. We have a dreamspace whirlpool front loader

[@theaaleol2868]

I have a front loader washer whirlpool energy saver. When I press the start button, door locks but then that’s it. No water and no spinning. Timer works but machine is stuck

[@eSpares]

Hi Thea Ale Ol, check the inlet valve with a multimeter which will determine if it has failed.

[@JM-ml9xw]

Hi I have a whirlpool duet front load washer the code disappeared however the red door locked but is lit up. And it sounds like it’s draining but not unlocking even after minutes please help what should I do?

[@eSpares]

Hi J M, let's start by getting the door open this video kzbin.info/www/bejne/gGjZq4p9gtuZha8&t shows you how to release the door then check the door lock and the electrical connections between the lock and the board.

[@mikhailkurassov5861]

I have an code F 04, what does it means?

[@11wonderchild]

2:28

[@windersonrocha4344]

error code A10 what i should do??? thank you

[@eSpares]

We believe an A10 error is indicating a fault with the draining. For more information see our video: kzbin.info/www/bejne/nKOoe5uObrijptk

[@joebillingsley6663]

My washer dont have thedigatal display how do. Do i know whats wrong it just beeps three times

[@eSpares]

Many machines bleep three times to either indicate a problem or that the cycle has finished. If you do not have an error code check what works by following this video: kzbin.info/www/bejne/h4qzoqOggbtqqZY this will help show what is going wrong.

[@pembs1]

The door seems to open and close fine. The end light is now permanently staying on and won't let me select a programme. Is there anyway of resetting the system please?

[@eSpares]

When the power is turned back on the system should reset. Check the motor brushes are not worn out and see our other videos: kzbin.info/www/bejne/emakqGp5d6p6hqs and kzbin.info/www/bejne/h4qzoqOggbtqqZY

[@hughesgaragedoorsystems5893]

This is an american model and has no display. How can I put it into service mode to check codes?

[@eSpares]

Sorry we do not have information on this.

[@mfreiher]

You were doing very well until you skipped how to open the front panel.

[@eSpares]

Not all machines have a removable front. What do you mean 'spiked'?.

[@Letstalkaboutart]

eSpares you didn't explain how to open the front. That would have been very good to know. Great Video, thanks anyway!

[@ellarayquiocho1810]

F8E1 whirlpool duet??help

[@eSpares]

Hi Boboy, error code F8E1 refers to a filling issue where the machine has not filled to the correct level in the time allowed, start by checking it's filling correctly and the drain hose is not too low which can cause syphoning.

[@ChefTokImam]

my Daewoo error code is E8.. how to solve that?

[@eSpares]

Hi Mat Seh. We believe an E8 error code is a washing machine motor error and a fault has been detected with the main drive motor. We advise checking the motor connection block and any abnormal loading condition.

[@harkeshkumar4552]

Hi i have whirlpool wasing machine its showing error 7 pls tell waht the isssu how to fix

[@eSpares]

Hi Harkesh, we talk about it in the video at 4.26 Mat says that F07 which is the same as your F7 relates to the motor so start there.

[@loreatherton1474]

am getting a flashing f27 on my AWOE 9140

[@eSpares]

We understand this is an overflow error indicating the water has filled too high in the drum. Reset the machine and watch a cycle to confirm the water is filling to the correct level.

[@arkudamon]

So I tested the element and had no reading on the meter. So I decided to buy a new element and replaced it today ...the washer is heating up again and it works however I still get F08 as an error code even tho it heats up the water. Do you have any idea why? Please don't tell me it's the thermostat that will take another 4 days for delivery and it's more expensive then the bloody element 🤦🏻‍♂️

[@eSpares]

Hi Arkuda, the board is still recognizing the error code, try to unplug it and leave it to try to reset the electronics.

[@arkudamon]

eSpares but when I was changing the element it was unplugged? (Of course)

[@eSpares]

Hi Arkuda, try this we found 1. turn off the washing machine and unplug 2. press the start/pause button for at least 5 seconds 3. plug the washer back in and hopefully, it has reset, if not it could be a malfunction in the board.

[@arkudamon]

So I took it apart again checked for continuity and it all seemed perfect. Managed to get into service mode and then it said F13 🤦🏻‍♂️as if I don't have enough problems lol. However F08 was gone from the service mode ... Test was successful door did look and unlock without a problem tho ... So decided to do an empty 15 min cicle and what do I see at the end of it ... F08 flashing with the service light 🤦🏻‍♂️ I am so frustrated

[@eSpares]

Hi Arkuda, you have obviously tested the components correctly so we can rule out the element, it does suggest that the only thing left is the board.

[@emmanueltorrente3128]

I have bought a washing machine it is 50hz, will it runs properly to 60hz power supply? please help me solve my problem...

[@eSpares]

Hi Emmanuel, This will depend on the machine and as you have not given a model number I will try and give information that may help. Generally if the machine can work it will show the following (50/60hz) on the 'rating plate' where the model, serial number and voltage information is listed. If the machine uses a 'mains voltage pump' it is likely to be upset by supplying the wrong mains supply.