Estimation of d-spacing (d) and lattice constant (a) for cubic crystal system using XRD Pattern

  Рет қаралды 22,940

Nanoencryption

Nanoencryption

Күн бұрын

#latticeconstant #d-spacing #XRDPattern #OriginSoftware #nanoencryption #crystalsystem #cubic

Пікірлер: 16
@UnExplorateur
@UnExplorateur 2 жыл бұрын
Thank you sir.. You're doing an amazing job..
@hemap773
@hemap773 8 ай бұрын
Please make the video on calculating crystallite size using debye scherer formula with errors
@cdfgdght3559
@cdfgdght3559 2 жыл бұрын
Excellent job dr
@muhammadnisarqasim636
@muhammadnisarqasim636 Жыл бұрын
sir how we can find the lattice constants using the origin file into the vista software. Please guide me about this issue.
@sivabalankaniapan8786
@sivabalankaniapan8786 2 ай бұрын
For XRD crystallinity percentage computation, do we need to take the whole range of 2 theta degrees from (15 to 80) or just (15 to 40) enough?
@NanoencryptionSKP
@NanoencryptionSKP 2 ай бұрын
Okay 👍🏻 then here I go with single intese peak..if you want then go through the whole pattern there is no issues.. So, I have taken and shown only a single intense peak, if you thought its the wrong way then follow as you said there's no issues
@sivabalankaniapan8786
@sivabalankaniapan8786 2 ай бұрын
@@NanoencryptionSKP Thank you so much, sir. However, I am a bit confused, sir, because I have recently done XRD on my samples. My supervisor asked me to calculate the percentage of crystallinity. However, I am wondering if I should consider taking the whole 2 theta degree from 15 to 80 or just 15 to 40.?
@NanoencryptionSKP
@NanoencryptionSKP 2 ай бұрын
@@sivabalankaniapan8786 take intense peaks only and average it
@sivabalankaniapan8786
@sivabalankaniapan8786 2 ай бұрын
@@NanoencryptionSKP thank you sir
@dabifrau2280
@dabifrau2280 8 ай бұрын
how did you find d=2.5123? or did you find the value of λ ?
@NanoencryptionSKP
@NanoencryptionSKP 8 ай бұрын
Sir, please go through the formula.. and in XRD instruments always use the value of lambda is 1.5406 A or 0.15406 nm
@dabifrau2280
@dabifrau2280 8 ай бұрын
@@NanoencryptionSKP okay, thanks, I've got it, but I didn't understand how you found the h k l values and especially the 311, 122 ...etc values.
@NanoencryptionSKP
@NanoencryptionSKP 8 ай бұрын
@@dabifrau2280 Do the Rietveld Refinement of your samples, there you ll get the value of planes. Therefore, run Rietveld Refinement using Fullprof software 🙏
@Ritusingh-i4j
@Ritusingh-i4j Жыл бұрын
How to know value of hkl
@NanoencryptionSKP
@NanoencryptionSKP Жыл бұрын
Do the Rietveld Refinement or Jcpdf Card number or Xpert High Score and Match Software
@theoperaja6583
@theoperaja6583 Жыл бұрын
The video is Excellent. please go this for all the crystal system
How to calculate lattice constants from XRD data using origin
21:44
REAL 3D brush can draw grass Life Hack #shorts #lifehacks
00:42
MrMaximus
Рет қаралды 10 МЛН
Сюрприз для Златы на день рождения
00:10
Victoria Portfolio
Рет қаралды 1,9 МЛН
Diffraction Lecture 17: Indexing Diffraction Patterns of Cubic Crystals
26:11
How to plot XRD | Professionally & Scientifically | Origin
10:10
How to Index X-ray Diffraction Peaks and Determine Lattice Parameter with Excel - Cubic
12:19
How to calculate microstrain from XRD data using origin
10:45
SAYPhysics
Рет қаралды 30 М.
How to find Crystallite size in Xpert High Score
5:33
Material Science
Рет қаралды 2,8 М.
XRD X-ray diffraction worked example problem
9:00
Taylor Sparks
Рет қаралды 94 М.
How to tell if a career in Data Analytics is right for you...
7:12
CareerFoundry
Рет қаралды 557 М.
How Peak Position Identify Crystal Structure :: XRD Analysis
6:20
Nano SPEAKs
Рет қаралды 2,7 М.
ML Was Hard Until I Learned These 5 Secrets!
13:11
Boris Meinardus
Рет қаралды 322 М.