ESU LokProgrammer Function Mapping

[@mikesmith4644]

These videos are very helpful. I was overwhelmed with my Lokprogrammer at first but its making sense now. Thanks!

[@wakkaflakkadown]

Thanks for making this so easy to follow. It really helps so much seeing everything broken down this way. 👍

[@the1fuzzykitty]

Thank you for the video. I found it very useful, even if I did have to rewind a few times. I was able remap my functions and I now have my esu sound and pilot decoders using the same buttons for lights. Thank you ESU for making the best and easiest remapping decoders on the market.

[@CW-qt1qv]

Thanks Matt. I use Lokprogrammer frequently and I still learned some things I didn't know from this video. Keep them coming!

[@OmegaDeus8467]

Thank you Matt on explaining the functions mappings. I was never too sure how it works. I must play around with them to see what I can get the most out of the decoders. I will definitely have questions later on this. Thanks again.

[@jeffbowman3721]

Thank you Matt, excellent video.

[@edcvgp9]

Outstanding! Thank You Matt.

[@SheltonDCruz]

Thanks Matt!

[@ag3365]

How can I change the funcion maping without lokprogrammer, only with dcc central, which CV and values are for AUX3,4 and F13? Factory setting for rear ditchlights not working

[@PSB-gj9xd]

How do you programme the Couple/Uncouple functions into a Loksound 4 or 5

[@runeljungstrommer331]

I need help with my rear red lights which shall light in the rear opposite to the headlights, how do I dealing with this? It is a LokSound V5 and I use AUX1 and AUX2 for this purpose...

[@chrislef5045]

Hi Matt. Can I easily REPLACE 1 Station announcement with another I prefer. For example, on my BR426 (DB) I installed the full project from ESU website but I don't like the brief announcement. A seperate announcement from ESU Sound Files Page - Swiss Station Announcements, is what I want to use. HOW do I replace that 1 Announcement, OR, ADD that Additional announcement using the LokProgrammer. -Chris

[@marcelodt]

Hi Matt. Why when reading the decoder, in this section the slots names are lost? I use Acceleration when clean the wheels of locomotive.

[@dwpedalplayer]

Quick question, without using the lokprogrammer or software (not compatible with my mac), is it possible to program a lokpilot XL V4 servo outputs (aux7-10) to be controlled simply by the directional switching? I couldn't find it specifically in the manuals, other than the function mapping dealing with the CV conditions block like CV A or CV L?

[@simoncook4070]

hi matt I want to assign aux 1 or 2 to function 5 and I want to do it on a loksound 3.5 Hornby sound decoder so I can use a suethe smoke generator can you show how to do it and do I have to read the decoder first so see what is free on the decoder thanks

[@vitekreska5630]

Hello, I could ask how to get the LokSound decoder v.4.0. do the factory settings? I would need it to be in a state when I bought it. so there is no sound, etc. Thank you in advance for the answer.

[@nicholascarbone3753]

How do I brighten the headlight?