I plan to buy and Elevate rack, but will drill some more adjustment holes. Why it doesn’t come that way, I will never know!
@LuisPerez-vy6bz3 ай бұрын
Are these rails compatible with other cross bars that are capable to sliding on to the rails? Thanks for sharing the video and that’s a nice set up too.
@rspbobthomas3 ай бұрын
What kind of seals do u use for front and rear? The origin ones are not useful for the new setup with the rack.
@scubeedu2 Жыл бұрын
I have one of these Bakflip MX4 covers on my 2018 F150 and would like to carry a 16' canoe when we go camping. Would I be able to make use of a roof rack like you have shown on your truck with a single rack tower maybe or are they only sold in pairs? I would only use the rack a few times a year to carry around my canoe and really want to be able to make good use of the tonneau cover. Thanks for any suggestions and part numbers to check out.
@jeffreyelliott6223 ай бұрын
Will this unit work on a 1994 Chevy K1500 and fit a 13 ft canoe on top and secure ?
@cindyschaeffer5433 Жыл бұрын
Will it work on a f 250
@Utubeisazzho Жыл бұрын
I have the ARE fusion trifold. Wondering if this rack will fit on Chevy Silverado
@joseluisperezjr32854 ай бұрын
I want that exact set up with those roof cross bars too do they sell it as a kit ?
@etrailer4 ай бұрын
I'd be glad to check on that for you! What's the year/make/model/bed length of your truck?
@joseluisperezjr32854 ай бұрын
@etrailer it's basically like the one on this video except non 4x4 and it's a 2020
@ejshelby54604 ай бұрын
So this rack can work with just any tonneau cover? Do I have to install the track/railing first, or I can install the cover followed by the track syatem
@etrailer4 ай бұрын
The TruXedo Elevate ladder rack will work with toneau covers that mount to the inside edge of the bed side (instead of sitting on top) that doesn't extend over the top of the bed side. Hope that helps! www.etrailer.com/Ladder-Racks/Truxedo/TX24NV.html
@AgelessEl Жыл бұрын
I have a 2022 Ford Ranger Lariat. I installed a Back flip like the one shown on this video. Wondering if rack is compatible.
@etrailer Жыл бұрын
The Truxedo Elevate ladder rack system is compatible with tonneau covers that mount to the inside of the bed rails such as the BAK FiberMax, F1, G2, HD, MX4, Revolver X2, Revolver X4, and VP For a 2022 Ranger, you'd need the # TX86NV for the 5 foot bed or # TX26NV for the 6 foot bed. Both kits include the rack and the mounting rails. Check out these links: www.etrailer.com/Ladder-Racks/Ford/Ranger/2022/TX86NV.html www.etrailer.com/Ladder-Racks/Ford/Ranger/2022/TX26NV.html
@mannycali334 Жыл бұрын
How are those ladders going to hold?
@etrailer Жыл бұрын
We used ratchet straps like # ETBMB-05852. www.etrailer.com/Ladder-Racks/Truxedo/TX24NV.html
@vadha1Ай бұрын
it looks like at the lowest setting its just slightly too low to wear a ladder wouldn't clear the roof of the truck.
@etrailerАй бұрын
The lowest setting puts the crossbars at about 18 inches tall, so you're correct. www.etrailer.com/Ladder-Racks/Truxedo/TX24NV.html
@mannycali334 Жыл бұрын
Can you install cross bars?
@etrailer Жыл бұрын
Sure can! We recommend the Rhino-Rack Vortex Aero rack, part # Y02-500B-NT. www.etrailer.com/Ladder-Racks/Truxedo/TX24NV.html www.etrailer.com/Roof-Rack/Rhino-Rack/Y02-500B-NT.html
@mannycali334 Жыл бұрын
@@etrailer oh sorry I mean like to mount utilities on the side like shovels gas tanks etc
@rlawrence2 Жыл бұрын
Yes I know what you mean. Like Yakima
@drumtwo4seven8 ай бұрын
WILL IT SIT FLUSH WITH THE ROOF RACK ?
@etrailer8 ай бұрын
We don't know, but here's how to figure it out! Measure upwards from the top of the bed side to find the height difference between that and the height of the rack on your truck's roof. If that height difference is 18-28 inches, you'll be good to go. www.etrailer.com/Ladder-Racks/Truxedo/TX24NV.html
@adamant71467 ай бұрын
does anyone know what ft lb of torque is for the bed rail (upright) is?
@etrailer7 ай бұрын
The fasteners that attach the uprights to the crossbars are torqued to 7-10 foot lbs. The fasteners used to adjust the crossbar height are torqued to 5 foot lbs. Truxedo doesn't specify a torque value for the hardware that joins the upright to the top of the bed side. www.etrailer.com/Ladder-Racks/Truxedo/TX24NV.html
@adamant71467 ай бұрын
@@etrailer thank you
@etrailer7 ай бұрын
You're welcome, glad to help!
@Alex-mv4me2 жыл бұрын
What’s the height difference between the bed rack and the cab crossbars? Are they all at the same even height?
@etrailer2 жыл бұрын
In this case the distance, if any, is minimal. Each vehicle is going to be different so keep that in mind as well. www.etrailer.com/Ladder-Racks/Truxedo/TX24NV.html#exp-productdetails=.related-products Make sure you input your vehicles year/make/model into the fitguide so you get the correct version for your truck.
@keithh9781 Жыл бұрын
A great system. Does the rack system lock to prevent theft of the racks, and the items on the rack?