I just installed this and thought I was missing a 12mm bolt that videos state to screw in the black intake tube/pipe. It was frantic during install trying to find a spare one. Finally figured out that new version comes with a rubber insulator instead (black rubber piece with 2 studs coming out of it). You screw that in by hand and then put on the pipe, and then the nut on it from hardware bag. Hope this helps someone.
@ZibrayMusic2 жыл бұрын
Hell yeah. I've had it on my car for like 400 miles man. Well worth it.
@joshwakawaka7409 Жыл бұрын
Hi! I have got ETS intake. Just wondering, is your car running well after a few months with it?
@ZibrayMusic Жыл бұрын
@@joshwakawaka7409 yes sir. Car runs fine. I had a chance to datalog it and no issues on my end at least
@joshwakawaka7409 Жыл бұрын
@@ZibrayMusic Thanks Chris, I have not installed it yet. Will try it when temps go up in my zone. I didn`t buy the box, is your intake with that?
@ZibrayMusic Жыл бұрын
@@joshwakawaka7409 yes, I bought mine with the box. Good fitment and shields it from heat soak pretty well
@conanrussell7458 Жыл бұрын
Nice looking car broster.
@DylanVBWRX2 жыл бұрын
Looks great, now to get more boost!
@SineFractal27 күн бұрын
Where does the sleeve go?
@trentonkrentz754222 күн бұрын
ETS didn’t introduce the sleeve till after my purchase. Never needed one cause I was already dynotuned. You need the sleeve if you’re gonna stay on stock tune
@AntonioHernandez-bp3mx Жыл бұрын
Did you tune for it ?
@trentonkrentz7542 Жыл бұрын
Ran it on stock tune for 1,000 miles. No issues but did get tuned later. That’s when I found out it wasn’t the safest to run on stock tune
@HI-pi1er Жыл бұрын
@@trentonkrentz7542 not the safest ? U can say that again . Always get a tune when installing a CAI
@HI-pi1er Жыл бұрын
Car needs a tune when installing a CAI u don’t want it running lean
@Roxas_DM2 жыл бұрын
Can you hear the intake sucking in air when your in boost?
@trentonkrentz75422 жыл бұрын
Yes
@CG-rb4xo2 жыл бұрын
How is that nameless performance strut bar?
@trentonkrentz75422 жыл бұрын
Haven’t gone back to the track yet to compare. Even if I did. It would be hard to tell. The car is now on coils and bigger wheels since the last track day. But for looks, price, and easy install. I definitely recommend it
@CG-rb4xo2 жыл бұрын
@@trentonkrentz7542 Thanks. I’ll consider it.
@Fa24_jason Жыл бұрын
damn still trying to get this but i reside in California if anyone has one let me know
@dumpjeep2 жыл бұрын
Doing an intake is totally not worth it. It adds no power. You might as well keep your stock intake and enjoy being able to use your warranty in the near future when you spin a bearing.
@stevensanchez75562 жыл бұрын
It’s pretty much just induction noise. Not tuned gives very minimal gains. And no they cannot void warranty unless it’s tuned. And if you’re that worried abt warranty u can always swap the stock airbox back before taking it in
@dumpjeep2 жыл бұрын
@@stevensanchez7556 I didn't say void, I said you wouldn't be able to use it. The intake is sufficient grounds for denial of warranty repairs. Furthermore, if you have actually installed that intake without tuning, then RIP motor. You cant do that on a turbocharged Subaru.
@node12572 жыл бұрын
why is this guy so pressed about other individuals life choices? Also the intake goes down to stock pipe for the maf, therefore no need for tune. It says it all on the website
@BboySweenkie2 жыл бұрын
@@dumpjeep you can, the ets and the normal have the same size diameter and angles, its just less restrictive
@dumpjeep2 жыл бұрын
@@BboySweenkie unfortunately that may be true with a naturally aspirated Subaru but not with a turbo. Your engine will lean and go into limp mode once you hit cold weather, broken pistons or bearing damage will result. ETS doesn't care because you have no recourse and 99.999% of people are not ignorant enough to do an intake on a forced induction car with no tune. Furthermore, unless its a MAP tune, a tune cannot help deal with turbulence at the MAF due to improper pipe diameter. So whatever youre trying to say about that has no bearing on the lean conditions you're creating.