Evaporator Swap and PULLER TIME | Blower Motor pull and clean | HVAC tech

Returning back to work from AHR 2024 in Chicago. First day back had a few service calls as well as doing an evaporator coil change out. And using a puller method to remove a blower motor from the squirrel cage and housing. This one goes out to Ted Cook. Enjoy .
 Hope y’all enjoyed the video if you could smash that 👍 button and SUBSCRIBE!! Appreciate yall 🫡
#bluecollar #hvac #skilledtrades #hvactech #hvactechnician #acreapir #hvacvlog #tools #dayinthelife #hardwork #workhard #tradelife
SUPPORT THE CHANNEL 👇👇👇
PAYPAL : @hvacwithkrauss
AMAZON LINK 👇👇👇
BADASS BLUE COLLAR GEAR
DISCOUNT CODE : Krauss10
trollcoclothin...
HVAC KNIGHTS LIVE PODCAT | SUBSCRIBE
youtube.com/@H...

[@MrMultitool]

You made Your point very well. That wrench works much better on those locking bolts. Keep up the good work and more videos'

[@KoolinwithKrauss]

Appreciate it!! That definitely makes it a whole lot easier than the hex wrench that it comes with!! Thanks again

[@Summitperry]

Puller no puller. Just clean the damn shaft. 😊

[@KoolinwithKrauss]

That’s about right!! Lol

[@woodystokes1543]

Ni😊ce

[@KoolinwithKrauss]

😂 solid!!

[@CommercialKitchenChronicles]

Lets go 😂😂😂😂

[@KoolinwithKrauss]

🤣 let’s get it bro!!!

[@dumptrks]

Did you say you "were doing it on the floor", "with knee pads", "pull it" , "4-5 inches" and finally"your all cocky" man your making this too easy😅

[@KoolinwithKrauss]

🤣 that’s why there’s so many “that’s what she said” clips I knew you would be the one 😂 😂

[@realSamAndrew]

Jake. I was looking for the "wallet" video you mentioned. How can i find it?

[@KoolinwithKrauss]

It’s on my video about the “endless blower problem” thanks Sam!!

[@HVACGUY]

Good job. Love those

[@KoolinwithKrauss]

Ohhhh there will be more curt 😂 teds ready!!

[@scotts4125]

I think the videos prove there's more than one way to do it. Options are always great to have. I have a puller but never used it (yet). Can't wait for your stepdad's video. :)

[@KoolinwithKrauss]

Absolutely!! There’s tons of ways for sure! I don’t use the puller every time, but it’s there. Now I’ll be using the sds from now on seems a whole lot more fun

[@pnajera3938]

I use the puller. No shame in that. Got to get er off by any means.

[@KoolinwithKrauss]

Whatever it takes!! Agreed

[@mikegilpin8527]

New subscriber been watching Ted Cook for years. He actually promoted your channel on the wheel pull battle. Old school Ted verses the new age. I think your both close but you know Ted is always gonna try to to be one up on challanges.keepung up on your videos ...great job!

[@KoolinwithKrauss]

Thanks for coming over mike 🫡 yeah he’s a wild one, I know he will have something 😂 he’s a legend!!

[@TomLawson05]

Great job on the change out thanks for the video

[@KoolinwithKrauss]

Thanks Tom 🫡

[@MikeB9771]

Jake ,my man. PULLING out all the stops on this one. Keep it up.

[@KoolinwithKrauss]

Oh Mike 🤣 solid pun

[@butlerstouchHVAC]

great work tech🔥

[@KoolinwithKrauss]

Appreciate you bro 🫡 💪

[@Ryan-RM]

Hey are you going to post a video showing any of the new equipment manufacturers showcased at AHR? I heard you in the livestream say you had some video and that you didn’t have an NDA 😮😀. It would be great if you did post. Thank you.

[@KoolinwithKrauss]

Wellllllll about that 🤣 I do have some goodies, a lot of footage to go through, I’ll see what we can throw together!!

[@Ryan-RM]

@@KoolinwithKrauss sweet! It seems that nobody is posting anything that was shown from any of the big manufacturers like Carrier, Trane, Daikin, Lennox, Rheem, Bosch, Mitsubishi, Gree, Fujitsu, Samsung, LG, York, etc… Lol 😆 anything would be nice to see man. We appreciate you!

[@noahbaggett9037]

Yes sir been waiting for your next video lol it’s the small victories in life

[@KoolinwithKrauss]

Hell ya dude 🫡 appreciate you bro!!

[@richlikeg3722]

That’s on big coil😮

[@KoolinwithKrauss]

Right?? 😂

[@user-eh2ek6kk2m]

Brother, noone can question the rusty blowers here in FL, FL humidity beats any other state no doubt. So the puller is extremely ideal and urgent here. But I beg you to get them quarter inch connecting wire brushes from harbor freight or walmart. Sandpaper slows you down a bit. Overall, great video as always G!

[@KoolinwithKrauss]

Jam it!! You did say that before 🤦‍♂️ I’ll stop at the freight today and grab some!! That humid air and salt combo is no bueno for sure!! Appreciate you 🫡

[@user-eh2ek6kk2m]

@KoolinwithKrauss awesome hermano(brother)! HVAC guy uses them every time there's a rusted shaft motor! 💪🏼🤙🏼

[@natepeterson7145]

Not much different here with the humidity than in Florida. It was 71 degrees today in the upstate.

[@pltmann]

Wow! Way faster than Ted!

[@KoolinwithKrauss]

It definitely can be efficient!! Thanks for tuning in!!

[@jenko701]

Live face off pay per view , charity fund raiser .

[@KoolinwithKrauss]

😂 do some sort of simulcast!!

[@Eddy63]

Good little vid Jake .... Is it warmer in Florida than it was in Chi Town Thx

[@KoolinwithKrauss]

Duuuuude Eddy 😳 🤯 that was something else brother 😂 appreciate you man!!

[@EverythingHVACR]

😂 you and Ted are funny with your tiny 3/4 horse resi blower motors 😅

[@KoolinwithKrauss]

🤣 😂 I know this is little toy shit compared to what you get your hands on!!

[@jasonjohnsonHVAC]

How was AHR. The livestream was cool. Get some big dog

[@KoolinwithKrauss]

Was crazy dude, exhausting 😳 appreciate it homie thanks for stopping in on it!

[@TedCookHVAC]

Geeze dude that shaft was NOWHERE near as bad as mine plus it only had 1/2 in sticking through. My next response video will blow the roof off !! Peace :-)

[@KoolinwithKrauss]

I know I know 😂 it’s all I had man, Looking forward to it 🫡

[@MariosACandRefrigeration]

On his job,he destroyed the motor and wheel,but i would move bulb when brazing.your tool is 50.00,his is 975.00.

[@KoolinwithKrauss]

Solid point!! I’m a cheap guy I can’t afford the 1k pusher lol.

[@TedCookHVAC]

Destroyed ?? No, that is not correct on the wheel... but the blower?? it is already a bad motor or we usually would not pull it at all. Just curious how you figure I destroyed anything ?

[@MariosACandRefrigeration]

If you hit the blower wheel to break it loose with a sledge hammer,the motor is done,in my opinion,to do a pull and clean.and i believe you used a hammer.@@TedCookHVAC

[@TedCookHVAC]

@@MariosACandRefrigeration No sir I did not do any "pull and clean" and I probably never will... I only ever remove a motor from the blower assy. if the motor is bad.

[@TedCookHVAC]

@@KoolinwithKrauss solid point ? really !?!?

[@RayRay-nb7tn]

You started before the timer did when taking the puller off. Did ya clean the inside of the cabinet before you put the New coil in, that back plate look dirty. How about an independent tech pick the blower motors for the both of you?

[@KoolinwithKrauss]

Oh man Ok add a second on for that 😂 🤦‍♂️ used some simple green and wiped it down, it was definitely nasty in there! Ted said he may ship one to me if he can find one.

[@not.enoughto.go.around6176]

does anyone have any tips on keeping this kind of work fun, light, good vibes and not letting the stress get to you when the days are long, HOT and SWEATY!!!

[@KoolinwithKrauss]

Just go in with a good open mind!! It does get crappy occasionally but just be thankful and enjoy the ride 😂

[@not.enoughto.go.around6176]

thank you man! ill keep that in mind! @@KoolinwithKrauss

[@azrealgamer]

How much you charge for this job??

[@KoolinwithKrauss]

Tbh I’ll have to double check the invoice, around 2k for out of warranty coil and txv, and blower pull and clean.

[@scottmaz4063]

Ted was 51 seconds

[@scottmaz4063]

Ted says the same about you.

[@KoolinwithKrauss]

He’s a legend!!

[@TedCookHVAC]

@@KoolinwithKrauss LMAO... yea a legend in my own mind !?!? Anyway, you is going down Jr.