Razor E300 Scooter Hub Motor - Battery and BLDC Controller Upgrade (48V 1000Watt)

Patreon - / evcustoms
Channel Support - www.paypal.com...
EV-Customs Website - ev-customs.com
Instagram - / ev_customs
Facebook - goo.gl/tu3Qdk
Music - High Ball Grizzley
Hub Motor 1000w 48Volt - bit.ly/39tYIGP
ZOOM MTB Hydraulic Disc Brake Calipershttps - bit.ly/2OUIYDe
12V 24V 6500K Waterproof Round LED Night Bar Lights - bit.ly/32X6JDb

[@cat-innova942]

the planet needs people with you

[@rockefelleragent1357]

Woah... nice. You literally redesigned the scooter and manufactured it! That battery build looks complicated I have no idea how to build it. I like the fact that you use pretty big size tires for better ride and handing on the road. I bet that the scooter is very light for the power it generates so it should be pretty fast. Nice work.

[@elmorocha4973]

outstanding elecromechanical reengineering, I'm working on a E200 myself swapping acid lead to lith no major upgrade

[@Zenny_18]

Bro why you have only 29k subscribers. You should have more than a million subscribers.

[@EVCustoms]

Because not everyone is like you! Thank you my friend!

[@JamiePineappleWyatt]

I don’t usually do this to people but hey; You really need to redo your phase wire joints, butt splice them properly, your joints will melt quickly. Fray each end and buy them into each other, wrap with thin copper wire and then solder it with flux, that joint will never break due to high resistance and you’ll get less voltage drop over it :)

[@jumpyjeffrey]

I agree. Also the welding was very subpar. A line of tack welds is not welding. He doesn't have enough heat penetration the fuse the metal. He just essentially glued metal to the surface. It may give sum support. But it's not structurally sound.

[@hedialaya3230]

Masterful ! from body work to parts mounting

[@grandtheftauto1233]

Very nice! The custom battery pack was impressive. Nice controller installation

[@god-likesystems985]

High-Level stuff here, lol. Learned a bunch, keep up to good work!

[@EVCustoms]

Thank you!!

[@juhopeltola3993]

Really cool. One serius battery you made. I like to weld whit stick and I use high performance lifepo4 cells in my batterys, but that is just my way and not nessesserily any better. Nice work man :D Good bms, and you can find seller in aliexpress that takes care of taxes too...

[@phasehalide]

Πολυ ωραια δουλεια. Προσφατα αποκτησα δυο τετοια Razor E200 με 12 βολτες στα 0.3v και οι 4. Τα σκουτερ ειναι σε καλη καταταση, εχω φτιαξει ειδη μια 7s6p απο 18650. Αργα αργα Κοιταω τις επιλογες μου με το τωρινο μοτερ. θελει αλαγγη και ο ρελες μεσα στο controller. Χαιρετησμους απο Australia. Αλεξανδρος

[@EVCustoms]

Gaia sou Aleksandre! Exw sto magazi ki egw dyo tetia E200 ta opia ta exw metatrepsei ki egw prosfata 6s5p, i epilogi pou ekane me 7s6p einai akoma kalyteri gia epidosis ;). Fantazome o enas reles apo ta duo einai xalasmeno e?

[@phasehalide]

@@EVCustoms Ευχαριστω πολυ για την γρήγορη απαντηση σου. Πιστευω οτι και οι δυο ρελεδες και στους δυο πολυ απλους ελεγκτες ειναι σαλταρισμενοι απο τα πολλα κλικι κλικι αρχικα και μετα τα παρατησανε και σαπισανε και οι παλιες μπαταριες σαν αποτελεσμα. Τα πηρα πολυ φθηνα και τα δυο. θα της ξεφορτονομουνα αμεσως της παλιες μπαταριες με το που τα ακουμπουσα. Επιδη φτιαχνω παντος ειδους συσκευες σαν επαγγελμα εχω πολλες μπαταριες που εχω ελέγξει με εναν αποφορτιστη ακριβειας που εφτιαξα απο Arduino πριν χρωνια γιατι τα Imax B6 δεν ειναι ακριβειας καθολου. Συγκχωρα τα ορθογραφικα και την ελειψη τονισμου γραφω με αγγλικο πληκτρολογιο :-).

[@phasehalide]

@@EVCustoms I am curently making the 7s6p battery packs now and i will replace the old relays with PWM and a few Irfz44N Mosfets i have plenty of i think. or i might just swap the relays with bigger ones for now. i've only had the scooters a week now.

[@manuelbonilla546]

Did the batteries first, dropped the pan 2.5 inches, raised the floor 1.5 to double room for twice 18650s and sealed everything in a box with vents in and out by the handlebars, cut the handlebars 2.5 inches on each side (more if I need to), folding footpegs on the sides. Head, Tail, Stop and Turn lamps and two fiamm 145db next to the handlebars, a control switch on the handlebar hinge and recesed padlock allowing easy carrying and storing

[@paolodelavictoria]

You're a genius man.

[@EVCustoms]

thank you man!!

[@pravinbhaleraochikhalibuld1170]

I like super video nice information thanks 👍 Iam Indian to your video sharering in India

[@PaawnHuuub]

That vice mounting infuriates me lol

[@tristantotev2887]

how long till you realised you where going backwards haha!!! nice work complete diy i enjoyed watching that. Maybe next time mount the brakes first then remove them and paint as you needed more reinforcement the hole was too high and the holes you drilled are raw and not primed or painted will corrode. other wise very impressive!!

[@MrMarkusmulder]

I loved the Casey Neistat intro. Good video and good work. Thanks ✌️ stay safe.

[@EVCustoms]

Thank you man.. ;)

[@ndoboalan1596]

Absolutely brilliant!!!!

[@YAPKARDESIM]

Nice battery desing 👍👍👍

[@EVCustoms]

Thank you man...

[@JonathanE.]

I bougt this motor exact the same but this was a great strugle 4:34....

[@whiteout475]

Can you post a link of where you got the controller and throttle?

[@user-nx6ne8wi6v]

Cómo siempre excelente video muy entretenido, felicidades amigo 🎉🎉

[@drewski6843]

The exact video i need to see. Was given bladez xtr ekectric scooter. It's fun to ride, but its a bit on the slow side. I also have that external chain driven electric motor and was thinkibg of converting it to hub. Glad i came acrossnyour video. I was wonder if you know where i can buy a battery kit, motor controller, with charger? Thanks again 🤙

[@nathangreig839]

What hub motor and speed controller are you using? I want to juice up my stock E300hd or can I get more power from doing something else?

[@theodorosantreou8730]

Started fitting the disk brake on the right side and finished it off on the left.I guess he did not like the idea of driving in reverse.

[@rakkon1]

It's really not that big of a deal. All you have to do is turn the handlebars around

[@electricridesusa]

You beat me to it 😅 been wanting to convert a e300 to hub motor for years... coincidentally I’m picking up a e300 tomorrow to start the conversion. Got the exact motor in my AliExpress cart a few months ago 😅😅😅 what brand battery did you end up getting?

[@ovi_4]

It is a Panasonic (CGR18650CG) type battery by the looks of it.

[@jonathan1976xxx]

Nice well done 😎

[@MWSRD]

Very nice but how do you Charge it plz?

[@stofffpv3128]

nice looking job

[@EVCustoms]

Thank you :)

[@JonathanE.]

Thanks dude it helped!!!

[@MonkeyUK.]

Cool as hell bro

[@albertogregory9678]

Super cool! Could you put this motor on the front wheel instead of the back, and keep the brushed motor in the back? Could you then have two speed controllers, for even more speed and power without spending more money?

[@EVCustoms]

Hi... you can put it front but i think the rear motor will not reach at front motor turning speeds, but this is a good idea..

[@tennisedit]

@@EVCustoms can you install a 2nd hub at front and wire the controller for dual ride

[@michaelanderson9792]

Imagine well done Sr

[@manuelbonilla546]

Will use a small automotive alternator and upgrade brakes later on

[@samsungsexy7164]

It's wonderful and detailed information. I always wondered if it's possible to add shock absorber to E300 for a jerk free ride 😉? Never seen anyone attempted doing it. Do you think any reason not to try it?

[@skullz6666]

Hi, great video, what gps app was that you showed? 👍

[@mister_em]

frame reinforcement is funny) camoooon

[@JMSERVIS]

No synku, abych pravdu řekl, tak v elektrice jsi "BEST" ale ta ruční zámečnická řemeslná práce tedy nic moc! To bych tě mohl vzít do učení. Ale ty zase naopak by jsi mě mohl doučovat co se týká elektriky, s tím mi, jak se říká, ujel vlak...

[@christophercobb4317]

Now that is very nice and powerful how do you charge up the batteries

[@Full_Throttle_no_Brakes]

Awesome project. Do you know if this motor you are using fit on m365 classic? Thanks!

[@EVCustoms]

Thank you man... i don't know,,, i never try that...

[@kingi7545]

I’m so impressed how do I get you to fix my mobility scooter and only goes 4 miles Per our needed to go much faster I injured my back and my neck so I just need something that can go faster but safe for me it mobility scooter so is it anyway I can get intouch with I don’t even no where to start!

[@michaelanderson9792]

So many wires Star Trek Spock’s brain

[@jonathan1976xxx]

Becomes pretty straightforward once you've done it a few times

[@chrislong590]

I don't have a grey throttle wire to hook to the grey 3 speed wire. What do I do with it?

[@harisberbic9671]

Great video file! Kali Epitihia!

[@EVCustoms]

Na sai kala file Hari!

[@harisberbic9671]

@@EVCustoms If you will ever think of upgrading the front fork with suspension shock absorber as I want to do on my Uber S300, it is going to be a pain...I looked all over internets and found only Monorim for Xiaomi which means you'll need to put also smaller Xiaomi front wheel, and that's not going to happen in my case. I want to build it whith fat tire that I already have.

[@muhtasimahmed1690]

Is it possible to use spacers instead of cutting the frame?

[@EVCustoms]

Yes my friend... you can put spacers.

[@Dave-ey3nd]

please help !!! how do you test a brushless hub motor with the waterproof (9 pin to the motor )connectors and should there be any kind of capacitor , igot thus in pieces and thereis a small box that looks like its a capacitor with a red / black wires but i dont know where it goes ! thank you !

[@ChrisMenendez609]

What happens if I use a 450watt controller on a 500 watt motor?? Would the motor spin slower than it’s meant to??

[@Abdul_-ct6pn]

Hey I have a question, I recently replaced my scooter batteries with 2 12v 9ah batteries and only problem is, when I put it on charge, the charger would show full charge but the scooter wouldn’t last very long, maybe 10 or 20 minutes of full throttle, I was thinking maybe the motor has worn out. Please help

[@richardjeffrey2801]

I noticed you changed the battery pack?.

[@EVCustoms]

Yes my friend..

[@kerrywisdom1892]

How can you help me to build mine like yours? Any suggestions..

[@madyicstik]

can you link to the motor you bought? and whats the top speed? how did it do temp and speed on uphill?

[@Todd_G_FPV]

How fast is it? I got a 48v 1000watt on my tiny drift gokart going about 22mph down hill and 16ish up hill lol I'm using lead acid tho cause lipo was too expensive at the time

[@EVCustoms]

max speed at 3 speed 47km

[@Todd_G_FPV]

Nice. My 3 speed quit working for some reason after my charge port shorted out so I think it's in gear 2 now but I geared it high at 15/32 with 4.5inch wheels

[@EVCustoms]

second gear is always 100% of power

[@Todd_G_FPV]

Hmm I figured it was like medium speed but either way I'm happy with it.. do you happen to know a safe charge rate for 18ah lead acid batteries? I'm charging at 6 amps and I think it burned one of the four batteries out

[@EVCustoms]

For lead acid always calculated with hours.. so 18Ah / 6-8hours = 4Ah - 2.5Ah charging rate

[@district99]

How fast?

[@edwinjidat8885]

Bro, can you please open the inside of motor. I want 2 know, how many pole inside. I think 4 poles. Make it faster, if u change the poles. Tht works for me. From 500rpm to 1100rpm, but drain batteries a lot. From 40a to 80a

[@EVCustoms]

It is too late my friend...

[@edwinjidat8885]

Why was to late?

[@jonathan1976xxx]

Maybe because he's completed his project which was hard work and time consuming and doesn't want to take it all apart I guess

[@andrewmccauley2807]

Nice build! Just wondering did the Disk Brake come with the Wheel? If not, where do you get it from? Thanks

[@EVCustoms]

Hi... disk brake is from local store here in Cyprus..

[@fishingstix610]

What was the bar where u bent on the clamp for??

[@ryujiyamazaki583]

Hi, thanx for sharing your amazing video. How many amps are you using for the fuse?

[@EVCustoms]

hi.. 30A fuse

[@ryujiyamazaki583]

@@EVCustoms Thanx for replying my question ☺, so how many volts should I be using if it was 60V?

[@EVCustoms]

First you must tell me how much thick is your wires, your hub motor power and your battery power output...

[@Darkstormkun]

can u teach me to make the battery pack?

[@rockefelleragent1357]

So is the BMS controller built-in to the battery when we buy a battery? I have been wondering where the BMS controller is located in my scooter I have a 5600w chinese electric scooter.

[@edwinjidat8885]

If Chinese made, i think ur bike using lead acid batteries. I think, there are no BMS, coz very expensive for lead acid. Lead acid batteries are suck. If full power, the voltages dropped a lot. Remember BLDC law, voltage equal speed. More volt, more speed

[@christophercobb4317]

How can I get in touch with you about connecting motors to lithium batteries

[@edersoncanela5237]

greetings friends, you have the link of the controller

[@EVCustoms]

I have it but i will not recommend ti buy from there .. is not good idea to buy from him..

[@Jump9R]

Can you make me that battery pack for my e300

[@panicosgregoriou9967]

Nice work keep vaping,lol.

[@JonathanE.]

Do you think i can power this motor with a 48 volt 6 Ah battery

[@traktion9]

sure for a few minutes or until your battery explodes

[@TechGoop]

Do you still recommend this (hub motor) kit you purchased or a different one? I do want a solid 1000w motor for sure for speed. Which controller model number did you order? Thanks again. Great video.

[@EVCustoms]

The only thing I do not like about this motor are the very thin cables, which after continuous consumption of 1300 watts get quite warm, Also the engine has a little high temperatures, but is at quite good levels...

[@TechGoop]

@@EVCustoms That sounds good. Your video is one of the few on KZbin that clearly shows each step installing the components needed. Very well done. I think the only thing possibly to help is an alternative battery pack solution. Most of us will want to purchase a Lithium Battery Pack that is pre-built and matched to this style motor and controller. I can't seem to find anything online that is recommended. These DIY electric scooters like your example shows just how easily this can be achieved with some work and the correct parts. Awesome work my friend! Best yet!

[@EVCustoms]

Thank you Nicholas...!

[@Peaceonearth-vv6ql]

@@EVCustoms where did you purchase the batteries? cant find a good place...

[@Peaceonearth-vv6ql]

@@EVCustoms also what kind of spot welder do you use

[@1Saltyone]

GOOD JOB, IS THAT AE300Ss with the wider wheels than a normal E300? i have had a few E300 and i have 2 now, but it was only after getting one with wider wheels that i even heard of them, it has a folding stem and seat, after near 20 years having them i think they must be newer and i buy mine 2nd hand to mess with them, ive got 5 new kind, avou, windgoo, jungle, hover electriq, but the razor is the only one that wheelies, love em, at 57 imstill wanting faster and quicker and RION Is out of my reach lol, ride fast ride safe brother

[@EVCustoms]

😆😆 Hello my friend... definitely the Razor is better not only by tyres... also the frame is more serious.. In my video the frame is fro E300 normal version.

[@1Saltyone]

@@EVCustoms great stuff bud, keep your eyes out for a cheap E300s WITH FOLDING STEM BUT MORE IMPORTANT WIDER WHEELS 3 1/2 NOT USUAL 2 3/4 INCH AND BIGGER 10 INCH USUAL 9 INCH? i found by chance i dont no if you are aware of them, if the use same controls it must go 10% faster? i used the normal back sprocket from one of my early E100 chain drives on the back of stadard E300 and used shoulder bolts that fitted in the sprocket design holes so dead easy 5 teeth ish smaller so 20% possibble speed, front sprockets i think if swapped would help tourc? im trying toover volt a cheap simple controller with thick wire and solder but motor, power, brake lock and outputs so 3 wires to deralleur + ¬ & line for control wire? tried wiring to a throttle of a kids scoot like controller came off, 2 white wires pos, neg and green, but power and drives as soon as powered, tried it 36v lead using switch to kick and stop, it puuled and shot up a fair hill lol 57 and make kids look stiff lol, someones selling a DOULTRON THUNDER NEAR ME, SOMETIMES BEING SKINT HAS SAVED PAROMEDS A BLOODY MESS 2 GRAND, FASTEST YET AOVO HACKED 28MPH AND RAZOR E300 DIRECT WIRED FROM 2 18V LIPOs drill trigger to motor about the same but wheelied easy lol

[@vsl5917]

friend where can I get the fuse that you show in this video? and why do you put the fuse in cable B-?

[@EVCustoms]

Hi V s L... this fuse i find it in local store here in Cyprus, cable B- is battery side so the fust must be always starting from the battery..

[@vsl5917]

@@EVCustoms ok

[@josephcarreon783]

What is the model or brand of the controller ?

[@josephcarreon783]

I like the battery size how much does it cost to make?

[@tonyjaime123]

Can you make me one please 🙏 my level of skills are not even close to what you just did to that scooter.

[@flipcivicvtec]

Where you located? Can you build me one too?

[@EVCustoms]

Hi.. i live in Cyprus ;)

[@meboy3513]

Top speed??

[@mdalansary7112]

47

[@meboy3513]

@@mdalansary7112 km or mph

[@mdalansary7112]

@@meboy3513 km

[@Diecast_Boy93]

Hi can you upgrade mines I can pay

[@abhijitc215]

Webside is not working

[@EVCustoms]

Hi.. i check it now, is working fine... thanks

[@abhijitc215]

But this is not available in india. I want to make it a SpeedBoard combination of Skateboard & Bike

[@balloney2175]

can't follow what he did... too complex

[@dirtbuilding5577]

Clean your shed

[@laryangel4082]

9

[@DieselRamcharger]

thumbs down for vaping. Lame.

[@P.M.B.]

Hey man where did buy your mini spot weld ?