Razor Scooter E300 Restoration 250Watt 24Volt

Patreon - / evcustoms
Channel Support - www.paypal.com...
EV-Customs Website - ev-customs.com
Instagram - / ev_customs
Facebook - goo.gl/tu3Qdk
Music - Parasail

[@migueldelgado1]

Corona Virus time will be remembered not only the Catastrophic nightmare that left to the world but also the vision to start re-inventing, remodeling, bringing to life & reconstruct things that we tough wasn't going to work, that remind me my grandfather's :... don't throw away things that you thing are bad, but also think how can you restored. love the idea that we world start thinking that way and implement our time on something that can keep our mind occupied from this pandemic. Bravo!!

[@tedhancock68]

Nice work. I definitely got some ideas from this. I've been restoring these lately and it's pretty rewarding. However, economically, you can only work on them for about an hour before you start losing money. I just do a new (standard) charge port and charger, XT60 connectors, general tune up and 7S lithium pack. I allow myself one hour including spot welding the 18650s together. After 60 minutes I have a fully functional scooter with superior performance compared to factory new. I will admit I've spent about 5 hours on one of them, converting it to 48v, 1000 watt controller, 15T sprocket and 800 watt motor. So for about $100 you can have a 25 mph, off road capable scooter that can hang with the big boys!

[@bobravenscraft5376]

You hit the BULLSEYE I don't believe in investing alot in these. Just eventually replace motor and controller and lithium of course. I said EVENTUALLY lol

[@vikkidyer]

This is what I want to do @tedhancock68 is the motor 48v as well or smaller. I have no idea on batteries what size is best to look for? Hope you don't mind me asking 🙂 xx

[@richierich.1982]

Great effort, the cheap bit of foam padding to clamp batteries most vital bit to prevent battery rattling itself to death.... look good though when it doesn't work 👍

[@NormanWray-hi8cu]

Hello dear friends it's new again thanks 😊😅

[@bobravenscraft5376]

These are good for ebikers to experiment with. I'm always mixing lithium cells. I wouldn't take the chance with my bikes. But I get scooters free. You learn the Amp Volt game without blowing up my ebikes PEACE

[@ralphbenites1819]

I was waiting for him to clean up the rims and get them polished up.

[@NormanWray-hi8cu]

Hello dear that brushless kit only has two wire each 😊😅

[@grandtheftauto1233]

Great video! I recently got one and the modding has begun! Mine needs some restoration but it runs good! :) Keep up the awesome vids

[@Shyamiiii]

You did the wiring so east. Im stuck. Do you help your subscribers with wiring issues? Thanks

[@startcherif]

Very nice video

[@adamoskalogeris]

Nice and clean restoration. Keep it up!

[@EVCustoms]

Allo00o0ooo..... ;)

[@persianchris2451]

Nice man! Loved it when I saw you put the RED on... If it was up to me, I'd of chosen red wires for the brake wires and hey man while you did all that clean work, you could have cleaned up those tires!! Just giving you crap, it's all good you made it look real clean. Nice work, how long did this take you?

[@EVCustoms]

Hello Chris... 2 days ;)

[@vendright]

nice

[@MatthewGlad]

Good frame would be good to update with a hub motor and put a new controller were the old motor was then a decent bank of lithium!

[@bumblebimmer]

What hub motor do you think can fit ?

[@Hamid9e]

You could as well upgraded the batteri to lithium ion, and controller to 500w :)

[@EVCustoms]

Hehe... it would definitely be much better... ;) But in this video only restoration.. I'm probably going to do it one day, because i have a lot of challenges about Razor scooters.... :)

[@Hamid9e]

@@EVCustoms can't wait for it :) i have one, and it could be cool to upgrade to read hub motor around 800w. The original motor is not so powerfull, but they are stil fun :)

[@jessedominguez8952]

EV - Customs please do this!

[@Michael-zx3pn]

Installing brake assembly

[@Michael-zx3pn]

Video for replace brake assembly

[@orlatris96]

Maravilhoso trabalho, excelente, parabéns. Gostaria de fazer uma pergunta. Tenho uma trotinete simples, muito parecida com essa. É possível trocar esse motor por um motor introduzido na roda dianteira? Tenho um motor/roda um pouco mais fino, é possível adaptar num garfo ou forquilha mais largo, idêntico a esse? Obrigado pela ajuda. Cumprimentos

[@RudraSoft1008]

Nice

[@stevemcgowan3017]

hi my motor died on my e300 so fitted 36v motor but chain seems tight how can you adjust chain is it just backing wheel off like motorbike.?we have xiomi scooters now me and my wife so razor seems heavy now but my wife enjoyed her e300 ride

[@EVCustoms]

Yes with little screw's

[@EVCustoms]

Xiaomi are best scooters....

[@thedaydreamer7972]

at 11:00, a few mins ago you sprayed the motor down with something, now you are cleaning it. what did you spray in it and what can you spray on a motor to get it clean and lubed up? TY for video

[@rasty2]

Hi, which product are you using at min 7:40 for cleaning the engine? I'm restoring an old "nameless" e-scooter and I took your video as inspiration. Thanks!

[@drsantiagocarrera8207]

Exelente con vos seria mejor

[@EnriqueGarcia-yv3xz]

good job but wood must be protected for so long durability

[@EVCustoms]

Definitely my friend Enrique Garcia... I varnished it.. I just forgot to put it in video when i editing, my mistake ;)

[@user-bd2yi9ge9t]

Yo tengo uno pero no sé cómo arreglarlo

[@josejuarez5984]

Lugar de venta de Bateria E300

[@bobravenscraft5376]

Now throw mud on it. Lol I like mine dirty. Less of a TARGET

[@mvenkatesan9937]

How many hours the battery life

[@nitinpal9]

I want to a hub moter kit,how much rate

[@abhijitc215]

What is the top speed ?

[@rozzyretreat3300]

Just bought two for eight bucks in exc cond got lucky batteries no good no charger

[@mvenkatesan9937]

How to charge the battery

[@moviesgamesstore3780]

Speed d details

[@Esuper1]

What about that wooden platform? You gonna leave it like that? Go to the depot and buy a piece of that aluminum diamond tread, cut it and file it to fit on top that wooden base. That wood thing is gonna rot and disintegrate in no time.

[@SvendsenWorks]

Very clean restoration! My E300 build is more of a transformation, check it out on my channel!

[@mvenkatesan9937]

How many hours can use