I go through all the problems and issues I've noticed since owning my Boxster. First Boxster video in this series: • Why I Bought Another P... For business enquires please contact team@road-and-race.co.uk
Пікірлер: 77
@moosicman1017 ай бұрын
PLEASE BRING BACK “this time on road and race” and the spunky music it’s 20% of why i love this channel
@RoadandRacetv7 ай бұрын
OK, next Boxster episode I promise!
@andljoy7 ай бұрын
I like that too :).
@BrokenVespaPhil7 ай бұрын
Yes, good shout!
@b6eunos7 ай бұрын
So glad you've started with another project car. Loved your previous videos and very much looking forward to future updates 👍👍
@RoadandRacetv7 ай бұрын
Big thanks mate.
@paultaylor96527 ай бұрын
A very interesting character, but he always chooses great cars and makes informative videos.
@RoadandRacetv7 ай бұрын
Glad you think so!
@Astra86767 ай бұрын
Glad you're back, doing these videos again. Would love to build a garage like yours. But I think the neighbours would not like it....
@RoadandRacetv7 ай бұрын
My neighbours didn't...
@timprice57 ай бұрын
You can get replacement buttons for the radio and climate control. Itll be a far better job than DIY and they arent too costly. Keys similarly you can get replacement shells, they wont be silver but theyre fine. Dont forget to swap over the immobiliser 'lozenge' in the old casing as this will prevent the car from starting. Its about the size of a grain of rice and easily missed. A really good upgrade i did on mine was to fit a GT3 master cylinder. Youll need to bleed the ABS system afterwards so make sure you have a diagnostic tool that can do this and combine it with a set of goodridge lines. Made a massive difference to the brake pedal feel on my S. AC condensers get punctured easily so they will likely need replacing and youd be wise to fit a set of zunsport or similar grilles to prevent it happening again. The oil leak is most likely the RMS. These cars also suffer with gearshift cables becoming disconnected, which stranded me in 5th gear one night on the way home. You can buy a set of clamps to prevent that reoccurring.
@RoadandRacetv7 ай бұрын
Big thanks Tim, some great tips there.
@AB0BA_697 ай бұрын
Tim, any more info on the Master Cylinder mod? In what way would you say braking feel improved? I have a 986.1 S for reference
@timprice57 ай бұрын
@@AB0BA_69 there was a big 'dead' area of the pedal before fitting it, almost like nothing was happening until 2/3 of the way down. Apparently a common Boxster/Cayman trait. Now the pedal starts to bite immediately when pressed. It provides much more confidence when coming up to junctions and behind other cars.
@IAmEd7 ай бұрын
Couldn’t click on this quick enough! Have now moved to Canada since your last Porsche content but still dreaming of getting one of these someday
@RoadandRacetv7 ай бұрын
Nice to hear! How is Canada? I visted a few years ago and loved it. Are Boxsters cheap in Canada?
@richardpope21147 ай бұрын
My boxster AC was leaking from the joint on the floor at the rear of the sill , it's quite easy for tyre fitters to catch it with the jack and it only has one bolt holding it together, the allen bolt will 100% snap but just drill it and use a nut and bolt , I just doubled up the O ring in the joint with new ones and it's been fine , worth checking before splashing out on a pair of condensers for the front , the AC oil is normally visible or get a cheap kit from e Bay with the dye and uv torch as it may already have been dyed so may be visible Great content as always
@RoadandRacetv7 ай бұрын
Cheers Richard. Funny you should say that as I found something interesting yesterday doing my full inspection video.....
@rhyslister27547 ай бұрын
It’s really great seeing you back with a new project, I’d love to upgrade my mx5 to one of these
@RoadandRacetv7 ай бұрын
You should! Mainly as there's no rust to deal with!
@rhyslister27547 ай бұрын
@@RoadandRacetv sold! 🤣🤣
@TheManmoths7 ай бұрын
Great buy! I looked at these but decided on something similar but more S54 flavoured. The Boxster/Cayman is such a good platform though and miles more precise than my Z4M but I’m a sucker for a yob car. 😅
@RoadandRacetv7 ай бұрын
Lol, that Z4M is a tasty car though. Done any mods?
@Erowens986 ай бұрын
Some speakers tend to degrade over the years simply because of the material choice of the membrane. If one is rattling, i'd personally recommend replacing the lot all at once. Since the others are likely to be close to going too.
@MayurPatelZA7 ай бұрын
Very excited to see how this progresses. I've watched the channel from your 986 days and now have my very own 987.1 Cayman. So all of this is very familiar to me. For the buttons and controls, there is a US option for metal versions. Also, my rotary knob didnt work so well but a bit of contact spray helped.
@RoadandRacetv7 ай бұрын
Nice. How's the Cayman doing? Any problems with bore score?
@nielsmonberg22577 ай бұрын
great to have you back
@RoadandRacetv7 ай бұрын
Cheers mate.
@parvinkukar12597 ай бұрын
I always felt the steering wheel was too thin so I had mine re trimmed in alcantara along with the gear stick and gator. And they made the driving experience all the better especially as was not too expensive
@RoadandRacetv7 ай бұрын
Nice. Who did you use for the re-trimming?
@fossilfish7867 ай бұрын
Acetone / Nail polish remover will remove the sticky buttons, you will replace the head unit which should solve the issue in the long term. Good buy. Still miss your 350z reviews, i guess keep the car stock with a few tweaks here and there.
@RoadandRacetv7 ай бұрын
Yeah, OEM+. Not too many mods just small tweaks.
@toon_85527 ай бұрын
Nice one Neil, looking forward to seeing you tackle these ‘small’ jobs. Hoping they are all easy enough fixes for you. What about an exhaust, that not first on the list?
@RoadandRacetv7 ай бұрын
Not sure yet. Stock exhaust is technically fine if not a bit too quiet. We'll see...
@AndrewwMK7 ай бұрын
I used WD40 to sort the stereo buttons. If you don’t have the BOSE you can direct replace the stereo. Heater controls you can buy replacements. It’s not too bad to replace them either. Check the fuse for the seat and the connectors underneath - easy fix. Check the front rads haven’t got leaves caught in them- as they rot out the A/C.
@RoadandRacetv7 ай бұрын
Big thanks Andrew for this, especially the seat. DId the same thing happen to your seat?
@AndrewwMK7 ай бұрын
@@RoadandRacetv seat was good in mine, but have had a few cars where the connectors have come loose. Biggest concern with my 987 was a damp carpet.
@richardcurtis68517 ай бұрын
Goo Gone for the sticky buttons. Worked for me
@RoadandRacetv7 ай бұрын
An excellent tip. Thanks.
@BurtonOutdoors7 ай бұрын
YOSH magnetic phone holder... absolutely hands down the easiest & most secure holder ever... I use one in all my cars.
@RoadandRacetv7 ай бұрын
That's a nice solution. Thanks.
@fahadhussin66127 ай бұрын
my phone holder seem to get pulled off the vent when i take my phone off. Any suggestions? It all ends up in my hand lol
@BurtonOutdoors7 ай бұрын
@fahadhussin6612 Is it a genuine YOSH? obviously make sure the magnetic base is pushed onto your vent as far as it will go, I have one in 3 different cars, my son also has one and not once has it pulled the base from the vent, the magnet supplied by YOSH is the perfect strength, are you using a stronger magnet on your phone?
@WalkinSalmon7 ай бұрын
Hello I have missed your videos. I still cannot get notified of your updates. You need to check your settings are not “made for kids”
@RoadandRacetv7 ай бұрын
Thanks for letting me know. I'll have to log a ticket with Google Support as I've checked and all my videos are not "made for kids".
@MrJONNYYOUNG7 ай бұрын
Makeup remover wipes are the safest and best way to remove sticky gunk off buttons. There's a good KZbin video showing the technique on jaguar sticky buttons.
@RoadandRacetv7 ай бұрын
Thanks for the tip!
@ian-ivey7 ай бұрын
Rubbing alcohol (isopropyl alcohol) will remove the sticky substance from the buttons and knobs.
@theblacktopsliders81907 ай бұрын
Buttons just pull off. Drop in nail polish remover or tar and glue. Buttons are available from Porsche but aren't cheap.
@andyglawe78047 ай бұрын
Sticky buttons can be cleaned with isopropyl alcohol.
@neilobusk7 ай бұрын
when s Neils on the job...we know its going to be done Properly.. the sticky buttons has something to do with the oils in the skin/fingers...and this eventually happens.. Isoprop a-hol is probably not the best to use....it dries rubbers plastics out.. wd40 or some kind of dry ptfe maybe better.. N x
@RoadandRacetv7 ай бұрын
Cheers Neil. Nice of you to say! Do you have a Boxster too?
@neilobusk7 ай бұрын
@@RoadandRacetv nooo fraid not...just experience of sticky buttons/plastics on various electronic thingys...
@thesteven2927 ай бұрын
How much to fill it and what miles are you getting on a full tank?
@RoadandRacetv7 ай бұрын
Good questions. Not done that yet. Will let you know.
@volvos60bloke7 ай бұрын
Why do you call it a chair and not a seat?
@CovKid2K107 ай бұрын
Put the Porsche CarPlay oem unit in, that would bring the car bang up to date
@RoadandRacetv7 ай бұрын
Sounds like a good idea. Any idea if it's easy to do? Is the wiring different? Does it nee dcoding?
@CovKid2K107 ай бұрын
I believe there’s no coding required. Google it - Porsche Classic Communication Management Plus. It came out last year and is super sweet and also oem! It’s not cheap but is installable at home or at main dealer. I have a 330d 2009 and installed CarPlay lately using a non oem module, it’s transformed my car into a brand new car!
@Carrera-gp9od7 ай бұрын
Only slight problem is it’s £1500 quid !!
@CovKid2K107 ай бұрын
It’s worth it for an OEM solution imo. CarPlay really makes you feel like you’ve got a new car!
@AB0BA_697 ай бұрын
@@RoadandRacetvIt's a very expensive solution and the wiring install is a pretty big headache. I recommend installing a BT through-pass (sits between the head unit and other components). Just make sure to isolate the wires to avoid electrical interference noise on them.
@willbehindthecamera7 ай бұрын
Love to see a Boxster back on the channel. I found a good fix for the AC buttons are some replacements off Ali Express. I bought some for mine and they only cost a few quid. :)
@RoadandRacetv7 ай бұрын
Good to know! I'll check it out now
@joecarrington96393 ай бұрын
S
@steffydog7 ай бұрын
Awesome
@RoadandRacetv7 ай бұрын
Cheers mate!
@TomRxtroWav3977 ай бұрын
Only it’s bother me is brake calliper is flaking off. It’s no where near what Porsche quality is.
@RoadandRacetv7 ай бұрын
Yeah not looking it's best....
@rosedad49957 ай бұрын
What about the IMS?
@RoadandRacetv7 ай бұрын
All revealed in next video.....
@RSXLad7 ай бұрын
Could be squeeky bum time..... love the content..... you are a well calculated man on this purchase.....good luck.
@RoadandRacetv7 ай бұрын
@@RSXLad Thanks man!
@porzingod67947 ай бұрын
Use glue-gone on the sticky buttons
@RoadandRacetv7 ай бұрын
Thanks mate!
@AB0BA_697 ай бұрын
The "sticky stuff" is the deteriorating "soft touch" plastic coating. You can try stripping that coating with an "anti goo" or even rubbing alcohol, but know that the knob will look different. You can try to find OEM replacements, but my experience doing that for a 986 was that a single know was listed for $40-50. Instead, I recommend trying to find a 3D printed solution or just replacing the headunit entirely with something like a Continental. It's black so will stand out a bit from the silver trim, but the company makes excellent modern understated (i.e. no rainbow lights) headunits with BT.
@t5jerry7 ай бұрын
if you want to regain your popularity and and income, i suggest you get something interesting BACK on the channel, you seem like a well educated guy and "look" financially secure, so your either doing this for fun or fortune ? UNFORTUNATELY the cars you like and feature on your channel don`t attract the yoof of today, innit, so you need a beemer again or something more interesting than your current porch, this is my OWN personal opinion, and opinions are like arseholes, we all have one.................😏😏