RTX 3080 FE Tear-Down: kzbin.info/www/bejne/hYmcdpuVg8Z2a8U RTX 3090 FE tear-down: kzbin.info/www/bejne/b3u6ooWgptaBodE Back-order a GN toolkit: store.gamersnexus.net/products/gamersnexus-tear-down-toolkit Or a GN Modmat: store.gamersnexus.net/products/modmat
@jnx78844 жыл бұрын
How bout rog strix 3080 OC
@chrishoward68644 жыл бұрын
Hi Steve
@chrishoward68644 жыл бұрын
Get some sleep
@raiders72944 жыл бұрын
When will the review for this card be up?
@wobblysauce4 жыл бұрын
That middle fan lines up with the hole cut out? so it works for thermals as you get more airflow through the card.
@coreross4 жыл бұрын
Enjoyed bearded hardware cameo
@GL-Red4 жыл бұрын
:0
@ExtremeConing4 жыл бұрын
How's r6 nowadays?
@ExtremeConing4 жыл бұрын
@@Erksah68 F
@patrickkoelzow94294 жыл бұрын
What a troll! =-)
@astral164 жыл бұрын
Hahaha
@VargVikernes14884 жыл бұрын
Liquid nitrogen tank is just bullying Steve at this point.
@ChristianGuadalupe134 жыл бұрын
As an owner of the production version of this card I can confirm that the caps on the back are now in a x2 + x4 config. Also this card seems to oc pretty well. I was able to get a +190core/+1000mem pretty easily putting clock speeds in the 2050-2080 area. Heaven bench mark 2560x1440p max settings scored a 3738 with an avg frame rate of 148. Approximately a 20fps jump compared to my old 2080ti.
@erikhendrickson593 жыл бұрын
Ultimately doesn't seem to matter. I have my card on water now and though it won't even break 50c in winter months the clocks STILL eventually drop to the 1925mhz range after awhile under load Which is fine honestly. You'd be VERY hard pressed to notice the difference between 1800mhz vs 2000mhz gcore (without active monitoring -- in which case you may get 2 or 3 additional frames when the card is under full load)
@ChristianGuadalupe133 жыл бұрын
@@erikhendrickson59 I installed the evga hybrid kit and flashed the evga xoc 500w bios. Turns out Steve was right.....you're always going to be voltage limited unless you want to get very creative
@suprecam98803 жыл бұрын
What's the point in running outdated API benchmarks? I'm asking because 20 fps is a nice improvement, sure, but that's such a (seemingly) random thing to test. Heaven is old lol. People are too concerned with FPS of games based on DX10, DX11, etc., when in reality what the card actually allows you to do is execute entirely new graphical features supported by updated shader models and APIs like DirectX, OpenGL, and Vulkan. Frustrating to see so many folks basing the success of a new card on irrelevant benchmarks. Anyway part of this is just me ranting, but kudos to you for the OC lol.
@HectorDomino.4 жыл бұрын
When the LN2 sprayed out, I immediately realized King Odin will show up in no time.
@BeardedHardware4 жыл бұрын
I’m lurking everywhere! Hahah
@HectorDomino.4 жыл бұрын
@@BeardedHardware Proud to be a Slacker. Thanks for the reply!
@Mrwarspite14 жыл бұрын
kudos to evga for doing a queue to order these cards.
@philbayf4 жыл бұрын
Looks like a pre-production card. They changed the capacitors on the production run.
@darjanator4 жыл бұрын
Production cards could also possibly have thermal pads on the underside of the backplate.
@James-dn8dh4 жыл бұрын
Good to hear, i was wondering about that.
@JB-xl2jc4 жыл бұрын
Doesn't really matter after the new update. Theoretically a mix of SP Cap and MLCC arrays is ideal, but, after the latest driver we're not seeing the crashing anyway, so it wasn't really a purely hardware issue.
@coredumperror4 жыл бұрын
Yeah, Steve mentioned this in a previous video. He said that EVGA contacted him and let him know that they'd found issues with the 6x big cap setup and pre-production testing (which Nvidia gave them next to not time to do), and had changed to a 2x and 4x setup (iirc) for production.
@Tucarius4 жыл бұрын
@@JB-xl2jc Nobody said it was purely hardware. In saying that, i don't see any reason 'having a mix' would be ideal when we know the 10x of the smaller ones is better for avoiding electrical noise. Also, the new update didn't technically *fix* anything, it (to my knowledge) just lowered the boost clock.
@thepolticalone9614 жыл бұрын
There best be some hot glue. That's how you get more ray tracing.
@GamersNexus4 жыл бұрын
You only get that attention to detail on the official first-party models!
@thepolticalone9614 жыл бұрын
@@GamersNexus honestly when I first saw that I just thought wow. These guys are crazy. That red thing looked really tacky. Still not on the level of hot glue tho
@jannclaudebinoya4 жыл бұрын
No you're wrong. You get extra ray tracing by addnig a plastic backplate with a $1000 card
@thepolticalone9614 жыл бұрын
@@jannclaudebinoya that's how you get maximum rays man. That's the highest level strategy
@birdpump4 жыл бұрын
Noice
@XlegendsX71Ай бұрын
first time i ever tore my card down it took me literally 10 minutes. putting it back together took me longer because i wanted to make sure it was perfect. I tear my card down every 3 months for cleaning. I take the heatsink right off to replace paste and blast the heatsink down with awesome cleaner and the hottest tap water possible with high pressure shower sprayer. comes out brand new every time.
@fffrrraannkk4 жыл бұрын
I just realized I'm such a dork. I see this video pop up in my feed on a Saturday night. The first thing that pops in my head is "Awesome, I'm gonna make popcorn and watch Steve take apart a GPU!" I do not regret my decision.
@250PICKLE4 жыл бұрын
much safer than cocaine and hookers. proud of u bro!
@CrustyAbsconder4 жыл бұрын
There seems to be a market for even larger cards, and if I were making the decisions at the corporate office, I would offer "The 7.1 liter Cummins Diesel RTX" or "Andre the Giant RTX."
@johndawe4494 жыл бұрын
02.25 in the UK and I’m still up watching great content.
@cornevangulik61664 жыл бұрын
Why the hell aren’t there any other reviews out of the evga 3000 series cards?
@MasterOfInfinity4 жыл бұрын
They're too ugly
@bakersavage2294 жыл бұрын
because most of them cant be overclocked. Evga cheaped out on the chips shown on the backside of the gpu. go watch jaystwocents and youll see what i mean. Go FE or Asus TUF and rog strix for any 3000s series cards.
@lancebockelman87564 жыл бұрын
@@bakersavage229 I have a FTW3 ULTRA OC'd to 2080 mhz stable so that's not accurate.
@bakersavage2294 жыл бұрын
@@lancebockelman8756 hence why I said "MOST" cards. That doesn't include ALL cards.
@KoolMB4 жыл бұрын
@@bakersavage229 incorrect and debunked by Nvidia
@RefrigeratedTP Жыл бұрын
spent so long waiting to hear which size bit I should use, and figured PH00 worked fine. Then we get to taking the I/O cover off, and THEN Steve tells me. LMAO well I'm glad I didn't strip anything.
@geletrode4 жыл бұрын
That Nitrogen tank is gonna give me a gd heart attack and iam even next to it.
@__Mr.White__4 жыл бұрын
absolutely. wtf
@richardfeynman74914 жыл бұрын
This is the best looking 3080 on the market by far. The RGB strip is perfect.
@svn59944 жыл бұрын
FE > Literally any AIB design.
@richardfeynman74914 жыл бұрын
@@svn5994 Strongly disagree. The FE edition is by far the ugliest design imo. It's also objectively worse, with bad temperatures.
@shandrakor46863 жыл бұрын
If you are removing the backplate to add some thermal pads and your worried about that nut that fell into the card I think if you remove the I/O plate from 10:25 first you should be able to snag the nut.
@e2rqey4 жыл бұрын
This card looked so much worse in the marketing material than it does in real life. I still don't like the red accents, but that light bar in the middle of the card looks way better IRL than I thought it will. This is my number one choice an AIB model now. It's between this and the RTX 3080FE .Whichever one I can get first is the one that I will get.
@thehypercovery4 жыл бұрын
Asus tuf is better
@e2rqey4 жыл бұрын
@@thehypercovery I don't want a GPU that looks like it was run over by a car. Also hate the TUF brand aesthetics in general. The thermals and performance between most AIB models is negligible, so the factors influencing my decision making are more looks, customer support and other quality of life stuff. If you think the Asus TUF is better, more power to you and good luck getting one.
@13thdukeofwybourne694 жыл бұрын
The red clown smile was supposedly inspired by the lit red led tail light from a McLaren P1 supercar. I guess it started off in concept as a rgb light, and cost/tech issues devolved it to be the loved bit of red plastic we know today :)
@silverhawkroman4 жыл бұрын
@@13thdukeofwybourne69 so now it's officially a clown emoji gamer card
@e2rqey3 жыл бұрын
Lol was just watching this video again and forgot I left this comment. I did manage to get this GPU btw. Got it the day after I got my 5900X from Microcenter on launch day. It's been an absolute beast so far, no complaints. I was also one of the first people to get it with the black accents instead of the red ones. Hope you all manage to get whatever PC hardware you're looking to get!
@hyzepher28404 жыл бұрын
The AIBs should send you the card unassembled so you guys can build it up - might save you some time
@pam00774 жыл бұрын
The person at EVGA that put the red clown lips on the shroud -> #FeelsBadMan
@_BangDroid_4 жыл бұрын
eh it's not that bad. If only people cares this much about things that actually matter
@_BangDroid_4 жыл бұрын
@@froot2912 You have my highest sympathy
@sephondranzer4 жыл бұрын
Steve, you should do a dumbed down step-by-step PC build with the new upcoming RTX 3070 and Ryzen 5900X for people trying to reach like 240+ fps at 1440P... For like no specific reason, just looking out for *you* best buddy!! 😊
@Watzleroviak12104 жыл бұрын
While I enjoy the extensive coverage on products that I can't buy right now (there are no cards), I would really appriciate the Lian Li AiO review you guys promised. Because that's Something that I actually can and would buy right now.
@santiman29384 жыл бұрын
Did Joe run off with the 3090? That was pretty random and funny.
@svartdraken4 жыл бұрын
This is the first time I like a card other than the reference design
@MasterOfInfinity4 жыл бұрын
EVGA makes quality boards and coolers. Yet, every single RTX iteration of theirs felt like a contest to see if could design the ugliest card of the generation. Why are they so reluctant to make a classic rectangular box?
@BOLOYOO4 жыл бұрын
It must have something to do with cost reduction. EVGA sell only NVIDIA and they are pretty niche.
@th3batfink4 жыл бұрын
Ihaven0thing Notevenaname same
@OjaioFansub4 жыл бұрын
The eagle one if far uglier, and look like a toy
@四as4 жыл бұрын
EVGA cuts corners to save money even on premium cards.
@markiangooley4 жыл бұрын
My EVGA RTX 2060 and 2060 KO just look boring to me. Which is fine. Chose a case with no window so I can’t see them anyway (I just looked at a picture I took of them - to confirm my memories of them).
@max3924 жыл бұрын
love your work Steve & Co! cheers from Uruguay!
@ramnexus4 жыл бұрын
Great video! Thanks for including explanations of the basic stuff in your tear-down. And thanks for not prefacing these explanations with "...and for you noobs...". Much appreciated. I have one of these cards on order. Happy with my choice.
@Berfs14 жыл бұрын
Steve: "This is standard, there are really only 2 ways--" LN2 tank: I bulli u, little child
@SteelSkin6674 жыл бұрын
EVGA cards are usually well engineered, and this seems to be no exception, but damn that shroud is ugly.
@SamGTA44 жыл бұрын
@humandxp Jeez dude. What did Evga do to you? Lol.
@SteelSkin6674 жыл бұрын
@@TheRealCatof Was this one of the bad ones? I haven't really followed all of it, I thought it was one the ones Steve uses for the RIP overclocking competition
@SteelSkin6674 жыл бұрын
@humandxp They're about at the same level as other Taiwanese AIBs, always were. There's nothing wrong with that.
@pickleadaykeepsthedoctoraway4 жыл бұрын
@@TheRealCatof You don't know what you're talking about.
@HollowPs4 жыл бұрын
I usually like the fall asleep to these kinds of videos but damn did that nitrogen scare me awake haha
@jaydnisevil4 жыл бұрын
Itching for your review of this card! I presume you're either swamped or waiting for the production card to arrive.. Either way keep up the amazing work :)
@aaymanbd3 жыл бұрын
Steve, did EVGA mention anything about the FTW3's Red Light of Death? The issue seems to be quite prominent with no proper explanation.
@JoeJacksonJr4 жыл бұрын
The Red accent lines are not over bearing. I am not sure what everyones issue is. Reason being if you like blue LEDs, then in your chassis the RED will look virtually black anyway.. If you like Green it will still look very dark and it will only really shine if you use red LEDs, which in that instance. You likely like the red anyway.. But if it still ruffles your feathers, use masking tape and krylon. Now me personally. I would liked the accent lines to been frosted silver or chrome.. If I was designing the color scheme thats what I would have went with. That said, the most obnoxious thing about this card is the crap thermal paste.. Other than that I really like the shroud and cooler design.
@silverhawkroman4 жыл бұрын
They should've just refused to use any red colors cuz if that card didn't have RTX 2080 on the side it would look like an AMD card
@silverhawkroman4 жыл бұрын
@Lucky Shot afford a workstation card? puhleez, just wait till amd knocks nvidia over with their gaming optimized cards (GCN and RDNA were more hybrid workstation-gaming which they now realize nobody wants) also if i needed this 3080 i'd save up to have the shroud repainted
@jamesryan17163 жыл бұрын
As controversial as it is to say, I actually quite like the proverbial "clown smile" side plate, no joke!! Keep doing what youre doing EVGA!
@LewdGeek3 жыл бұрын
I wish someone do a video on how to rebuild it and changing the thermal paste and tell us if the thermal putty have to be re applied or you can just rebuild it as it is with the old one???? But as always freaking big channel doesn't answer their viewers and community...
@sophomorehat4 жыл бұрын
"Boss, gamers and enthusiasts are really into customisation these days - you know, all the RGB and stuff - and they're willing to pay a premium for an attractive design." Yes. Let's put red accents on it. And make them cheap, too. Cheap and plastic. And red. Put them on the ends and on the backplate, you know, to make sure they can't be hidden.
@renatoigmed4 жыл бұрын
Thats what Jayz says lol
@stevencharette7918 Жыл бұрын
would be nice if you did a evga rtx 3080 3090 hybrid tear down but anyways thank you for you're fairness and honest reviews cant get that from other content creators because they review products they are sponsored by which then makes the review bias someone gives me 1000's in free products in oder to keep them coming good reviews always makes for more free stuff common sense
@peytonhastreiter68663 жыл бұрын
This is probably the 30th+ time I've watched this video, I'm waiting for it to be in stock and for the price to go back down because of tarrifs. I'm currently running a strix 960.... I need this card.
@smoketinytom4 жыл бұрын
Mmm, some soothing instruction manuals that means I won’t break anything.... Hopefully.
@timmagee83484 жыл бұрын
That 3080 mod mat thud... 👌
@kkevinC4 жыл бұрын
Damn, I wanted to see behind the RGB light bar
@bretth63934 жыл бұрын
Interesting how it only has poscaps and is still good performer.
@maxxlr8tion5784 жыл бұрын
Evga red trim mod kit options = 1 new card 2 user swaps shroud 3 black sharpie or paint marker 👍
@s1lfyh144 жыл бұрын
I have got this card and I don't mind the red. To me it looks fine and this card is a beast.
@Matt-man694 жыл бұрын
Yes I also have this card and in any case with a mild tint you don't even see the red accents unless you have a ton of lighting. Card looks amazing in my meshify C TG dark.
@s1lfyh144 жыл бұрын
@@Matt-man69 btw does your card have very loud coil whine when gaming?
@Matt-man694 жыл бұрын
@@s1lfyh14 I have not noticed any coil whine or abnormal noises on mine.
@LOLHoneybadger4 жыл бұрын
This is a reviewer model that has the different capacitors, they later added one "better" one for Production Models... is it possible production models also have the thermal pads under the backplate? When we never got a review on the card but we get a tear-down video, yeeeeeeeeeeeet I want a full review on this card Steve, c'mon now :-P I already have one on the way (will be here Tuesday), I want to see what you guys got out of yours OC & performance wise :(
@TechHug4 жыл бұрын
Now are you going to watch the video and read the description?
@AlexSBedini2 жыл бұрын
Great video as always!!! Can you imagine the cooling performance boost this heatsink would have if we use aftermarket fans like notcua ????
@Demorthus4 жыл бұрын
I just want my 3090 version to be available :'(... These 3D renders are waiting for love. Especially the animated ones with 400+ frames
@dylanjohn97034 жыл бұрын
Okay, but I bought a new system thanks to tech tuber hype, now I cant get a 30-series, or 20-series, since 20-series cards are sold out in my country besides 2060s.
@koben3073 жыл бұрын
Thak you Steve and Gamersnexus. I just waterblocked my FTW3.
@ewoodley824 жыл бұрын
These RTX 30 series cards remind me why I never moved away from my cheap ass DIYPC case. The two 120mm fan mounts on the side panel are much beloved by my GPU. I'd rather have a bit of hassle removing the panel in exchange for the sheer volume of airflow that my card gets
@prototype81374 жыл бұрын
Its like these channels had all of these follow up videos planned for the 3080 yet very few people even care or want to see news on the cards anymore.
@passionne8364 жыл бұрын
May you upload the 900 W bios for the community ? This card is so power-limited and today, only a shunt mod can prevent power throttle, which voids the card warranty.
@jeremiahsingularo73404 жыл бұрын
will we ever see the impossible, the most magnificent, the most awesome, the most cool and hype thing on this planet!? passive cooled Zen3 and RTX3090 system!?
@marccarter13504 жыл бұрын
Here's another card that's coming your way in 2022!
@mOnocularJohn4 жыл бұрын
10:43 the card nuts on the modmat. >.>
@markwood14034 жыл бұрын
Can you guys please do a diy hybrid kit mod as a continuation to this?
@emanuelpersson31684 жыл бұрын
On mine 3080 FTW3 i got a mix of "POSCAP and MLCC" 4 of "POSCAP" and 2 "MLCC"
@coryhauge27984 жыл бұрын
Been waiting for this!
@IIARROWS4 жыл бұрын
15:30 when you don't have a cat in the office anymore and you want to feel the same situations...
@the-lonemandalorian26744 жыл бұрын
What do you run on? because you don’t run on sleep 😂
@shitoryu84 жыл бұрын
Foreals, I hope he's getting proper rest but I ain't too sure.
@txkingg4 жыл бұрын
Probably monster or red bull 😂
@daviddebroux47084 жыл бұрын
@@txkingg I'm not sure if one should touch those drinks.
@patrickcarrillo7143 жыл бұрын
The funny thing is is when you put a water block on that thing it turns a triple slot card into a single slot and absolutely destroys massive heat sink when it comes to thermals
@CapibaraHD4 жыл бұрын
The red detailing really is not sitting right with me.
@PabzRoz4 жыл бұрын
paint it
@svn59944 жыл бұрын
@@PabzRoz Hey idiot how about instead of defending EVGA's design you admit that it's out of place? Last time I checked I shouldn't be required to paint my $800+ USD GPU because people like you exist. It's an $800+ GPU it should be plug and play not paint and then play.
@PabzRoz4 жыл бұрын
@@svn5994😂😂😂BRO you're so triggered wtf lmfao. Or just don't buy it? I don't care, I'm running a Tuf gaming 3080. I'm not an EVGA fan, I'm just saying if you really wanted the card but hated the accents you could paint them. I'm not "defending" them I think it's dumb as hell they did that. I'm just saying it's a work around. Why are you so upset about a graphic cards color accents? 🤣
@tylergriffis50364 жыл бұрын
@@svn5994 If you don't like the color then don't buy the card? You're literally angry over a GPU color accent. EVGA isn't the only one making 3080's you know. Calm tf down.
@HeyHey-fy5jd4 жыл бұрын
@@svn5994 Imagine getting this mad over something you will never be able to afford anyway.....
@Qyngali4 жыл бұрын
Just to point it out, this is a pre-production card... not that it should matter. Just pointing it out to the people that might not be up to date on the whole capacitor controversy that was blown out of proportion. Anyway, it's been changed on the release cards.
@greggreg24584 жыл бұрын
Does the final version have the thermal pads?
@Qyngali4 жыл бұрын
@@greggreg2458 I have no idea, sorry. Maybe Steve can ask EVGA.
@edgarceja98264 жыл бұрын
Joe, Joe, Joe!! Joe apparently said screw this tear down lol And the way Steve runs behind him to funny
@appreciatizer59114 жыл бұрын
Let Buildzoid make a video as long as he wants!
@finarfin99394 жыл бұрын
This looks like a well designed and built Nvidia board. It would be interesting to see what BZ's opinion would be on this board. He normally says that custom boards are usually cost down version of reference board.
@MrWizardjr94 жыл бұрын
with the price of this card i would be really disappointed if its cost down
@MarkHyde4 жыл бұрын
Some of these videos have kitties - but this one has a 'Wild Joe'. :)
@outcastatsabre4 жыл бұрын
The amount of whining about a purely superficial red line is astonishing.
@JoriDiculous4 жыл бұрын
and most of the whiners want even see the line when the card is mounted.
@VizardPhoenix4 жыл бұрын
If you pay 700 or 1500 dollars for something, the performance should be the first concern, but that doesn't mean how it looks becomes irrelevant especially when that horrendous red outline would conflict with a lot people's builds.
@outcastatsabre4 жыл бұрын
@@VizardPhoenix ideal build is a steel meshy box with no view on internals. fite me
@JoriDiculous4 жыл бұрын
@@VizardPhoenix yeah, its not like you got competing brands to chose from.
@Matt-man694 жыл бұрын
Agreed. and what most people don't realize is once you put it in a case with even a mild tint on your window you dont' even see the red. That and these cards are so long that the "clown frown" is usually so close to your front fans that you can't even see it. I am looking at this card in my case right now and I can't even see the red accents unless i have sunlight going right into my case.
@IanYav5.94 жыл бұрын
Thats strange that they didn't utilize the backplate, my 2080 super FTW3 had thermal pads on the backplate.
@Metalhead-4life3 жыл бұрын
Would have been nice to have the modmat that shows both sides of the GPU for placing screws, I guess I have the older version, kinda pointless placing screws on it if you gotta remember where they go anyway.
@frizzix92794 жыл бұрын
*To the Early Squad Reading This: sending Virtual hugs to anyone who needs it. Always stay safe read my name ✔️*
@charlie-yz2dv4 жыл бұрын
I subbed
@Researcher304734 жыл бұрын
For the reference I do have 2 mlcc caps in the middle of the array.
@hillppari4 жыл бұрын
Looks better with just the metal heatsink without the plastic shroud
@random_user916144 жыл бұрын
Tbh I like the look of the evga card except the red accents
@shauntexas69644 жыл бұрын
you're looking good today Steve, I love you
@jacksontint4 жыл бұрын
JOE!
@Rave.-2 жыл бұрын
really kinda annoyed GN didn't do a breakdown like this on the Strix, given its direct competition with the FTW.
@johnson88694 жыл бұрын
Got one today. Looks a lot better than my gigabyte 3080 gaming. Slightly cooler but not by much.
@pbdye16074 жыл бұрын
Cheap and easy solution to the Taylor Swift problem: Gloss black Testors model paint pen. You're welcome. Might take a few days for the smell to go away, though. >.>
@NAW32Nicoisme4 жыл бұрын
I love teardown videos
@bobsixtyfour3 жыл бұрын
Can you guys provide the screw sizes as you tear down cards?
@GalvinW4 жыл бұрын
Which is harder disassembling a 3080 or buying one? :D
@Apollo-Computers4 жыл бұрын
Joe was like "Yea, finally got a card!!!!!"
@richiec77004 жыл бұрын
Faux Carbon Fiber trim ring would look good
@LewdGeek3 жыл бұрын
Someone can do a video about how to repaste this card??? Because this video is confusing with all the thermal foam and all that and I am kind of scare of doing it..
@MrReed6664 жыл бұрын
Steve needs a thermal paste applicator for that putty. I know a guy.........
@KerbalLauncher4 жыл бұрын
Inductors DO care about heat! The ferromagnetic core will lose its magnetic properties above a certain temperature, especially high density inductors since they use high permeability materials that are more sensitive to temperature. The voltage and current regulation will degrade as they heat up.
@busybeingterrible72663 жыл бұрын
Would it be possible to add thermal pads to the backplate without a full disassembly? If you don't fully remove the screw with a nut, could you rotate the backplate enough to get the pads in?
@whistlinturbo4 жыл бұрын
Been waiting on this vid.
@CaptnBeeBop4 жыл бұрын
This, the Founders Edition, and the ROG Strix are the only 3080s I want and I will wait until I can get one of them
@jmasked50824 жыл бұрын
QUESTION: So EVGA changed the capacitors on the production cards because of the crashing problems. Then NVIDIA just patched the problem away with a driver update? Has the driver update lowered 3080 performance?
@Xoron4 жыл бұрын
How the heck are you supposed to place that nut near the slot cover to fix the back plate on reassembly? oO
@Starfals4 жыл бұрын
Woa, those cards look huge and heavy. I wonder if that will be a problem. How will the poor motherboard handle it lol.
@verliebt34654 жыл бұрын
you can usually screw the cards onto the edge of the case
@wobblysauce4 жыл бұрын
@@verliebt3465 but the GPU sag part, at the other end, you normally need a spacer or some other thing to lift or pull up on the end like a string to the top of the case.
@prunn4 жыл бұрын
6:01 the big question is, how do you screw it back on? glue it in place?
@rticul88623 жыл бұрын
That's what I'm trying to find out.
@99Etien4 жыл бұрын
The PCIe Pin pictures (17:29) on the mat are WRONG or don't apply to this card...
@io21944 жыл бұрын
All the 3080 you have got is more than all my country 3080 owners.
@lightsightbite4 жыл бұрын
Does anyone know the approximate time for the ti version to be announced?
@Aurummorituri4 жыл бұрын
6 SP-CAPS? Clearly not a retail model. They have at least one MLCC array on the shipped cards.
@angelmarc41514 жыл бұрын
the cryo tank comment was the best - "stop talking crap "