Evolve Carbon GT Wheel balancing

[@TheKief227]

Thanks a lot mate! I wasn't able to figure out the problem with my board myself..

[@DinoRider710]

Name of the songs! Must HAVE!!!!

[@Neilus001]

Thanks for your video. Just a thought instead of adding weight you could rotate the tyre on the trim to counter balance the difference. They do this on normal car tyres if you go to a good balancer. This reduces the rotating mass and makes your motors more efficient less energy to get the wheels going. If nothing else it would reduce the added weight you would need. I'm going to try it my self when my board arrives. Thanks for sharing :}

[@maggiswelt829]

Thanks for feedback I appreciate! I have rotate the tyre first befor balance ;) I think the Valve is the problem.

[@Neilus001]

I think you are right. Maybe tubeless Tyres to reduce the weight and counter balance the valve as you have done. The tyres would not be as durable and maybe more susceptible to punctures. I would love to try it and see if the performance improved or not. I would also be interesting to weigh all of the wheels. At least compare the two fronts and the two rear and see how close they are :)

[@Neilus001]

Just for interest I weighed my front and back wheels. One was 575g the other 580g so pretty close. Rears 715g and 720g

[@johnwarburton6666]

Obie 1 was good

[@eboardlifestyle]

i cannot see what ur are doing exactly. need better lighting. where do i get these things. can even see how ur doing it

[@dronus4x4]

Howdy were the weights you used for the AT Tyres steel or lead? If they were steel how have they held up? Do they rust if left in the open air? Awesome video, thanks for sharing!

[@maggiswelt829]

+dronus4x4 The weights hold quite well. They are the same as for car tires. They do not rust because they are varnished. A link to the weights is in the video description.

[@dronus4x4]

cool thanks. Ive ordered and recieved them. Seems to make a difference. I ended up using 2x10g weights on the inside of the spoke of the wheels to make it even. THanks again.

[@Neilus001]

Quick question, the shaft on your track star is that original? The one I received was way too short and thin. Cheers

[@maggiswelt829]

+Obie 1 No I have built my own shaft

[@temporarymomentary]

You don't need to buy any special balance stand. Just use a front axle.

[@BlokartS260]

Wieder ein super video, bischen dunkel, amazon verkäuft auch studioleuchte haha. Was war die unbalance ursache? Vielleicht das auseinander nehmen von die felgen, oder die kilometer im gelände?

[@maggiswelt829]

+BlokartS260 Danke! Ich denke das die Ursache für die Unwucht das Ventil, der Reifen und der Schlauch ist. Die Reifen haben eigentlich immer eine leichte unwucht und da das Ventil außen liegt bringt es bestimmt die meiste unwucht in das Rad. So würde ich mir es zumindest erklären, ist ja eigentlich das gleiche wie bei Autoreifen.

[@amfromch]

cooles Vid. Spürst Du den Unterschied beim fahren?

[@maggiswelt829]

Hi, Ja das Board fährt bei hohen Geschindigkeiten wesendlich ruhiger.

[@kimpettersson9290]

Thanks!

[@yanzodadon]

a balanced wheel would give you massive advantage at the evolve world cup.

[@maggiswelt829]

Jep, but I think they also balance his Wheels. XD

[@yanzodadon]

i never even thought to balance my wheels until i looked down when i was going flat out on the AT wheels and it was wobbling like crazy lol but nice video man i ended up bying some wheel weight after watching

[@maggiswelt829]

Thanks for Feedback I really appreciate it. After balancing the Wheels are very smooth on flat ground and Highspeed.

[@nismo929]

👍

[@nismo929]

are those normal weights for car tires or special ones for rc? you have a link where to get them....

[@maggiswelt829]

Normal weights for car tires.

[@KaneFreitas]

genius!

[@maggiswelt829]

+Kane Freitas thanks! XD