H bridge preview

[@ALifeOfWine]

I subbed to this channel when you had like 100 subscribers because I could feel that one day you were going to do something so amazing it could change the way we think. Unfortunately my understating is lacking, so I'm not able to keep up most of the time. Still going to keep watching for that one day though. I know it's coming.

[@MasterIvo]

thanks Kevin, that is great to hear. Deep in my heart I feel the same.

[@scottneels2628]

Thanq ThanQ!! Glad to hear you're well. Stay safe.

[@stevewilson8267]

Wow. Very impressive. Great job.

[@MasterIvo]

thanks Steve. hope you are doing fine

[@indio007]

Cheers for staying safe and productive!

[@MasterIvo]

thanks!

[@migueasr]

You're a crack. Thank you very much for sharing!. God bless you, man. !!

[@MasterIvo]

thanks! Bless you

[@tisserandstephane7845]

productive R&D and fantastic job !! I like to see you your progress ...

[@MasterIvo]

Will do

[@colinmcdonagh4705]

much respect dude

[@deeznetz]

Glad to see you're still working

[@MasterIvo]

Very glad to still be working :)

[@polygon2744]

Beautiful work! Thank you!

[@MasterIvo]

thanks! But not done yet.

[@cryptonein]

Your update is so very much appreciated. Thank you Ivo - sharing such small updates is fine and wonderful because we all need to focus on really bringing forward actionable information that will help us to be self sufficient in light of the life changing events that are more frequently being thrust upon us in one way or another. Even in the smallest way, so many of us would benefit personally if we could make our energy consumption more efficient. One that that could be helpful is continuing explanation on your videos of where you're going and your goals. Where might we see this go? Etc.

[@MasterIvo]

I hear you.

[@vishwasdinni]

Master Ivo is really doing very great job for the upcoming future. Would you please tell how to choose the capacitors properly at the ends of Bi-Filar coil to have a series resonance.

[@MasterIvo]

thanks. The caps I use are wima fkp1 or mkp10. polypropylene, they work with high frequencies. I put them in parallel, like 4x10nf and 5x 1nF. this gives 45nF, in series with the coil. then I tune the square wave that drives the mosfets, so I get a single voltage sine wave (with an optional impulse on the maximum). making the series cap smaller (less caps in parallel) raises the frequency.

[@vishwasdinni]

@@MasterIvo Thanks a lot the information

[@vishwasdinni]

@@MasterIvo Hi, I am doing research on a similar project with wireless power transfer and using Full H-Bridge. I am not using any tuning circuit before the transmitter coil and even after the receiver coil. So, if a series tuned caps before the transmitter coil and parallel tuned caps after receiver coil is added, will i achieve improvement in the range of wireless power transfer. please do give few suggestions for achieving better range of wireless power transfer.

[@MasterIvo]

for wireless you need dielectric induction, this means using the (both tx and rx) coils surface area as the plates of a capacitor. Resonance in not enough. you need sudden rapid single polarity voltage changes, thats why I use impulses. oliver nichelson has a interesting paper: wi-tap.energy/wp-content/uploads/2015/10/Underwater_Comm2.pdf that radio is longitudinal. the antenna is high voltage, and impulsed, the impulses collapse the high voltage dielectric field.

[@vishwasdinni]

@@MasterIvo Thank you for the great information 🙂

[@banyanstudio]

Congratulations!

[@MasterIvo]

Thanks Miguel

[@dkdyker]

Hi Ivo, I have a question about your earlier vid showing 950vdc on output. Was this usable DC? Did you have any loads? It would help me to achieve the same usable output for this tech to move forward. Thanks 🙏

[@MasterIvo]

no that had no real power. it was achieved by resonance only. To create power from resonance it needs to be impulsed (as shown in my radiant power video of april 2019).

[@MrForushani]

Hi Master I am still trying to figure out the circuit for high side switching, I am a novice. Is there a chance to get a diagram for your half bridge? If not, any chance you can build one for sale? Thanks and God bless.

[@MasterIvo]

Hi, yes I am recording a video(s) that shows the half bridge circuit. I will be able to make it and sell it to you. There might be more people who will want it, so I have to plan it a bit. so it will take some time. probably next year. Keep in mind it works with a dual channel power supply, that is series connected. I will explain it in the coming video.

[@MrForushani]

@@MasterIvo I made a small donation before and I am going to make another one. I appreciate you sharing your hard work At my age, 72, I might not be around next year. I don't know too much about this stuff either. I ordered the mosfet driver abd the isolated power supply but don't know what to do with them. Kind of dumb Anyway, any help will be great. [e-mail]

[@wihandebeer1755]

Hi Ivo, what is the efficiency on this circuit?

[@MasterIvo]

Its not finished yet. This is just a prototype to tweak the setup

[@notsocrazyjohn5348]

Thanks for your response, I didn't realize so many people were interested in bifilar coils. I noticed on one of your videos you were testing out three coils closely spaced, how successful were they in that configuration, were they in series or parallel. Do you intend to use the H Bridge driver to run multiple coils or to try to capture both the opening and closing spikes. I had already built the square wave generator and ac to DC converter and step-down circuits before I realized that they can be bought for less than parts cost on aliexpress, also a great resource. The only problem seems to be the freight cost, I couldn't find any way to query how those charges are dealt with when ordering multiple items, $2 for individual item and $5 for the postage, any thoughts on how to minimise this cost. Keep up the good work. Cheers John

[@MasterIvo]

thanks, yes aliexpress works fine for me. It is becoming more expensive, with less quality. but I still can find stuff on it that works. The h bridge will be operated as a double half bridge. The halfbridge is what I am working on now. as it is the best way to get both polarity impulses.

[@GerolamoUrsidYulin]

Tsup, How's it going? I write because I cannot wait till you publish your work on cone coils. How far is your work and when will you do that?

[@MasterIvo]

Hi, doing great, how are you? Right now I am focusing on my advanced radiant power circuit and tuning it. The cone coil has to wait.

[@GerolamoUrsidYulin]

@@MasterIvo cool. So I guess I'll have to wait. No pressure

[@GerolamoUrsidYulin]

@@MasterIvo I'm through a very important part of my life now. I plan to finish my sci-fi novel in about two years. I have been writing IT for over twenty years and I hope to develop my theory on a warp driver. I wrote to Google about that and there was no response... which is good - since they had not send IT back without reading - NASA is not interested in such revelations. The idea is quantum teleportation - speed without velocity or acceleration. Let's say there is a straight line and on this line there are equal disrances. At the front the mass is "existing the most" - the more to the back - the same matter exists the less and finally IT stops existing. But we teleport the least existant to the front and IT works like the previous time icon on KZbin - if the instances differ a lot in strength of existance - they both grow, but if they both are similiar in the strength of existance - they both shrink (become less strong in existance). So this is like saw-tooth current that Has a pseudomovement in the same direction as IT grows.

[@MasterIvo]

@@GerolamoUrsidYulin good to hear! curious about your book, is it in English? I am also writing, and I wonder if I can turn it into epub format myself. You know what Eric Dollard said about NASA? Never A Straight Answer ;D interesting theory, but most can be learned from practice. theory should be developed from practice, not the other way round. Our minds are very able to fantasize, out of reality. but always based on learned things from the past. true invention aften comes from clear observation, noticing the unregularities. and investigating them by experiment. only afterwards a theory can develop. at least thats my opinion. I looked years in to electric resonance, but never thought about impulses. Nikola Tesla is very clear in his lectures (and radiant patents) about impulses. these are the key.

[@GerolamoUrsidYulin]

@@MasterIvo I thinking I'll write it only in Polish. My English is too bad. The book is about a despot with a head attached to a computer. Originally it ment to show the borders od how far we can go and where we shouldn't. The book willa be published as ebook. I Hope to write more things and as this is my first great thing, I am not setting myself on making money, but finish a "great master piece that cannot be written" that every artist should have . So I'll probably publish IT for free. I have ideas for other books, but before I start I must be confident my workshop is legit. That's the purpose od this book. Basically I put a lot info structures and I used some math (my own) and psychology to do the tricks. Writers say - throw away adjectives, because that makes the book boring. So I figured out a way to make adjectives raise the attractivness of my book. I AM also studying mbti for my dialogues which I found previously flat (3 weeks for each type because three weeks is enough to get a habbit). And I write only 15 minutes a day - that's the most efficient way.

[@mykedoes4099]

Trying to get back to the energy research no time yet , GL

[@motobacktoconstitution4138]

Whats this H brige is for?

[@MasterIvo]

I used it to see If I could use it. I could not. But it led me to the half bridge circuit. And that works. Making a new video now. It creates an impulsed series resonant primary (for Tesla coil and more) The H bridge could not do that.

[@motobacktoconstitution4138]

@@MasterIvo thank you for repry sir. You created gunius chair if you are in US I would like to be a faze1 subject. You did so awesom gunious job with bifiler coil but it need many peoples testimoney to sell it to get alot of money to support you. I will be 1st subject as faze 1 study.

[@MasterIvo]

@@motobacktoconstitution4138 Thanks

[@motobacktoconstitution4138]

@@MasterIvo kzbin.info/www/bejne/nKaWin2Hmb-gn9U Mr Ivo I send this to Mr Dan Winter too but I saw longtudunal wave lighting up light without hurming people in water on this video Tesla called(in seacret of cold war Tesla book) white warm non hurmful power(electricity) , Suwaruu called( I think) scalar non hurmful electricity travel though eather or midium, is this why in this video guy who are using longtudonal wave is not electrocuted under water lighting up halgen light? (1st question) I have Tesla coil & solar pannels can I put solar enagy shoot to 2nd wireless coil from 1st Tesla coil 90degree from top of tesla coil to create longtudinal = scarlar wave to 2nd tesla coil& bifiler coil reciver recive enagy at distance 50 foot far without using expencive copper lines? so it become wireless non hurmful enagy transfer ? Please let me know if you could please. (2nd question) While I was studing tesla coil I saw few video said scarlar= longtudonal wave come from top of tesla coil 90 degree from top of Tesla coil but side of tesla coil comes out transverce wave is this correct? (3rd) Scarlar , longtudunal wave is this easily meger by ociloscope sir?(4th) kzbin.info/www/bejne/jJWWhoKDbM6mZ5I Is longtudenal wave is pure force = pure push and doesn't have EMF o burn insurations(safe) till it change to current?(Seacret of cold war Tesla book)(speaking about longtudonal non hurmful but healing wave) Electromagnetic radiation create heat & loss on enagy? But longtudunal wave create pure force & push panatrating all things ? (5th question)

[@TitofBee]

come on, Master, what about the device now ?

[@MasterIvo]

It takes time. I have the radiant half-bridge circuit working, and am now producing the video

[@notsocrazyjohn5348]

Hi Master Ivo, love your work. I started to investigate Solid State power generation a few months ago and started to develop various components whilst researching, finally I came across your site last week. I have been watching many of your videos, taking notes ect, but haven't seen anything about the reason you chose the specific wire size or number of turns, is there an optimum size and dimension or are these arbitrary and we simply do the math to determine the appropriate component sizes for the circuit we are building. Also, it has become obvious that I am going to need some other equipment beside my Multimeter, oscilloscope would be one, considering your experience what would be the lowest level required because they range from $100-$1000s, if there is anything else that I will need I would appreciate if you could let me know. I have already built some of the components and yes it is near impossible to tune them within any degree of accuracy without the right tools, so thank you for pointing me in the right direction regarding the timer and adjustable frequency component. Just watching your videos has advanced my research enormously and I am truly grateful for your help. Cheers John Oflus

[@MasterIvo]

the wire is choosen for its low resistance. I found 2.5mm2 copper wire ideal. Scope: Rigol has proper scopes 2 and 4 channel 1052 and 1054 if I recall correctly (I prefer 4 channel). you probably need a square wave generator. Aliexpress sells them minimum capable of 2 MHz.

[@markl2804]

@@MasterIvo What maximum voltage do you think is necessary for the square wave generator? If you have a link or a model number that would be awesome! Thanks

[@MasterIvo]

It depends on what gate driver IC you use. My radiant half-bridge uses ttl levels, so 4 to 5V. (2 channels) my radiant power 2019 circuit uses a 10V square wave signal (If I remember correctly).

[@jerrysmith372]

Interesting. First time here - not sure what your goal is. To say your build is a bit out of control is an understatement. Still, very interesting. I have my own experiments I'm doing in a totally different direction but may prove to be very useful. I should know more by the end of summer. Good luck with what ever it is you're trying to do.

[@MasterIvo]

thanks! I got it under control now, with a new half bridge circuit, giving impulsed series resonance. Are you sharing your research on your channel?

[@dianathompson7597]

I would like to see a vid of the effects of the chair. I think you Are the only one experimenting with these energy fields.

[@MasterIvo]

The effects are in the subtle energy field of the human body. Some people are replicating it. I still intend to build a dual coil setup, but thats for the future. So much ideas to materialize. Pfew

[@dianathompson7597]

@@MasterIvo I just don't see anyone els explaining these effects or going through the prosses of exposure and what the benefits are.

[@MasterIvo]

@@dianathompson7597 yes, we need more people experumenting and shring the results. together we could progress much faster.

[@patazertyui]

Great circuitry! I assume that you are seeking ultra fast switching what kind of MOSFET driver are you using?

[@MasterIvo]

yes ultra fast, for proper impulse (inductive spike) generation. I use the isolated gate driver called... eh I'll have to look the number up first edit: www.infineon.com/cms/en/product/power/gate-driver-ics/1edi60i12af/

[@scottneels2628]

@@MasterIvo Please do share, I'm working along side with you learning as I go.

[@MasterIvo]

great, please share your results. this is the IC : www.infineon.com/cms/en/product/power/gate-driver-ics/1edi60i12af/

[@MasterIvo]

@patazertyui www.infineon.com/cms/en/product/power/gate-driver-ics/1edi60i12af/

[@MasterIvo]

I also use MGJ6D122005SC (murata) for the isolated dc: nl.mouser.com/datasheet/2/281/kdc_mgj6scdc-1019175.pdf

[@yeahsicca1]

Interesting work, Master! Kei-vet 💥⚡🌠💫🕳️🌪️🌧️🌈☀️🌱🌸💞

[@MasterIvo]

luv joe

[@iyoutome]

Hope all is well brother. Have not heard from you in a while. Peace love and Cheers!

[@MasterIvo]

thanks Claudio, doing fine. Getting the circuit tuned.

[@iyoutome]

@@MasterIvo Nice to hear from you.

[@stephenthompson5413]

what the heck is an H circuit? what does it do?

[@Infinion]

It's just a term used in a lot of power electronics to describe a switch configuration. Switches in an H bridge configuration allow current to flow in both directions across the middle bridge of the H, so you can make an inverting circuit. The switches are located on the 4 endpoints of the "H" shape. en.wikipedia.org/wiki/H_bridge

[@MasterIvo]

h bridge, is commonly used to drive motors. I use it to drive coils

[@fabioc16]

Good!!

[@MasterIvo]

Thanks Fabio!

[@MS-ef1gy]

Phi/Psi and Poynting Vector W/M^2 through Vibrational transfer...

[@MasterIvo]

Hi Mark, good to see you. H bridge works amazingly well for resonance. Very effective.

[@MS-ef1gy]

@@MasterIvo Yes working both the high/low (pos/neg) side. Happy to hear from you and see the direction you are presently headed. You are very creative in reviving the different use of typical circuits in your quest... Take it easy... and seriously...

[@notsocrazyjohn5348]

Just on another note, I couldn't access your email address on my computer, it wouldn't accept my email and password. Cheers John

[@MasterIvo]

yes you need to be logged in with gmail on youtube

[@martinhughes1854]

This might be of interest: montalk.net/notes/transverse-longitudinal-waves He has some interesting theories derived from Maxwell in relation to scalar and vector potentials.

[@MasterIvo]

thanks but the link is down, I emailed tom (admin), I hope he will restore it. edit: he fixed the link

[@mykedoes4099]

Sup Ivo bin a while..

[@MasterIvo]

Going strong. how are you doing?

[@lucius33verus]

INTERESTING THEMES .. PLEASE IF YOU CAN LEAVE TEXT TO UNDERSTAND .. THE ENGLISH SPEAKING IS IMPOSSIBLE TO UNDERSTAND .. THANK YOU .. GOOD WORK

[@MasterIvo]

use subtitles on a PC, you can select any language

[@phonzy]

Yes first 1st comment ever

[@MasterIvo]

You've done it!