Depopulating Circuit Boards Marathon Part 1

[@eWasteBen]

Oops, This video went for way too long. Whilst editing, it did my head in so be warned.. A lot of waffling on here.

[@Do_Odles]

I love the waffle mate :)

[@busbey61]

I don't think it is long enough!

[@busbey61]

Is it possible to depopulate those with a hot plate? An IT guy is going to give me some motherboards if I give him the capacitors and transistors off of them is why I ask.

[@busbey61]

Not even 2 mins in, you might be answering my question regarding the hot plate... I guess I'll find out!

[@Justinbeehoney]

Ewaste Ben get a warehouse and hire a slave already 🎉u cripping all of Australia p.s. did a gold platinum and silver Investment on your investment video recommendation I try for palladium if I can. Premium was not calculated due to excitement. Of course my 3 investment go down and your palladium recommendation goes up the 1 I missed until later.

[@tawnihaynie1065]

Hi Ben. Good morning. You ARE the World PROFESSOR of EWaste. Thank you for all your teaching. Have a wonderful day. 👍👍👍❤️❤️❤️😎😎😎

[@Wreck-Gar]

Just came in from depopulating power boards for 12 hours straight and then watch Ben doing the same for 2 hours. That's dedication 😁👍

[@josephcormier5974]

Look your waffling is very informative people learn from you constantly thank you for sharing this six stars brother

[@andipadaunan2415]

Another great video ben😊

[@dr.a006]

I’m glad you’ve evolved from mass depopulating and sorting crumble to selective picking and sorting. Which also helps the rest of us too! Thanks.

[@shaneyork300]

These type of videos are by far my favorites!!😊

[@bigcountryscrapper6885]

Great video Ben i watch ur whole videos while i strip wires.....great stuff

[@MikeDoesStuff101]

Hello! Been waiting for another depopulating video for awhile!!! Appreciate your knowledge Ben! I learned SO much from you! Thank you!

[@davidranew8768]

Great Video Ben Keep Bringing The Video's Dude God Bless You And Your Family 🙏👍👍

[@wayneday3916]

Wooohooo a marathon I love these videos

[@josephburdell2041]

Ben i found your video VERY educating thank you

[@dalecrary8738]

Great informational video. Thanks for what you do.

[@theaussienurseflipper.8113]

U use ran a soldering iron along to remove the gold fingers.

[@franckmaximoff527]

great video as always

[@yardmine]

"you're ripping off board buyers!" - I love it when people on the internet tell you how to run your business 🤣

[@tawnihaynie1065]

Make your videos as long as you want to. It IS YOUR SHOW. 😃

[@ScrappingIrish]

great info as always sir, unfortunately no real board buyers here in ireland and as i am a micro scrapper and do it as a hobbie all my boards get stripped lol plus its always nice to get some gold that you made yourself even if it cost more to get than it's worth sometimes. hope all is good with you and really enjoyed

[@davewatts4877]

The Royal Mint is starting up a plant to extract precious metals from ewaste. Would be worth giving them a buzz..

[@ScrappingIrish]

@@davewatts4877 as England is no longer in Europe since brixit not a option for me

[@MD4564]

Love it, you should keep some of the chips, some of them can be worth a little bit.

[@Sloxx701]

The axial silver tube shaped tantalum capacitors will have no indentation around the positive end of the body, while silver axial electrolytics will have an indentation next to the positive end.

[@thadofalltrades]

I wonder if you could use a hotplate or heated sand to depopulate those boards. Heat em up and just pluck the stuff off.

[@pederlindstrom3132]

One of the yards I use takes circuitboards and pays flat rate ,doesnt matter if it's a board from a TV remote or a telecom board. Last time it was at 5 swedish krona /kg. Of course I take off stuff,,even aluminium as it pays more.

[@turtlewatchesyoutube]

ben have you given any thought to collecting the solder (i use a putty knife) left behind on the boards after you remove bgas? with the amount of boards you go through you would fill up a jar up rather quickly. i started a jar about a week ago that already has 200 grams in it, altho theres a few tiny mlcc's in it too that also came off the boards while tapping the putty knife. but thats ok, they might have silver solder on them too. its not pure silver but it wouldnt cost much to recover it, acid wise. btw magnetic mlcc's can have palladium and platinum too, its just in much lower amounts.

[@michaelplus-trojan_dc8687]

Cody'slab actually did a video on refining silver solder. He came to the conclusion that the materials are more expensive then the reward. The silver solder usually only has enough silver in it to say there is silver in it basically

[@busbey61]

Hell yea! Between watching you and Sreetips, I am trying to collect EWaste in America! Can you do one round of recovering some precious metals please? I'd like to see how you would do it.

[@RuneChaosMarine]

@1:55:50 i look forward to your gold recovery videos. soon you will be stripping everything.

[@vaughndumas]

That Z80 CPU is definitely collectable.

[@johnkriegelstein4891]

Very interesting,thank you.

[@beanyb0b.]

Hi Ben, regarding the trimmed gold fingers, get to know a contact in a PCB factory & ask to get a sample of the gold checked out using there XRF machine, takes about 20 seconds to measure the gold tab thickness on one of these - I use a Fischer XDAL daily at work, good bit of kit but very expensive. readings in gold thickness ( microns) can be printed in a summarized report to show any future customers wanting to buy your scrap gold 🙂🙂👍👍

[@jonglewongle3438]

This treatise substantiates what I had since figured. It is a consideration of board value as against what bits to pluck off and retain and what is to be left on the boards. Pluck off this or that and still retain board value or sacrifice board value for stuff on it that you want. Judgement calls with every board being so processed. Not that I myself could tell a flat pack from a BGL, or telecom grade from motherboard, but that is what it is with this. How in blazes is one person going to process half a garage of mixed boards ? Someone help the poor guy ? No, not really. One gets to rockin' and rollin' on it, knowing better than anyone else what the brief exactly is.

[@simonkh7278]

Depends on prices you have locally for pcb. E.g. post-2000 mb pcbs are about 1.50 usd per kilo here. So no point in selling it. At the same time we have 1.20 USD for motherboards with removed flatpacks. Kind if quest, sort, evaluate, depopulate

[@joob-jj6uv]

Can they also use a lower karat? I don't get much ewaste(especially computer stuff) but I have noticed some fingers have a very weak yellow.

[@simonkh7278]

flatpacks with radiators are just twice less than regular. 5gram/kilo in the caps compared to 8-12 gr/kg for 'regular' black top flatpacks.

[@rizdalegend]

Put a couple vertical pins drilled into your table, or build a fence that you hammer the circuit boards into while removing chips. Guaranteed quicker removal.

[@keytefirerefining1355]

You can't tell If there's gold inside a chip by breaking it. Gold bond wires you can't see because they so thin in a chip like that. What you've been looking for is gold plating inside which is only a fraction of the gold there. Without the plating there's still likely the bond wires. In a board like them your 99% likely have gold bond wires

[@cads877]

Agreed.

[@sibelangmaung]

Mantap Ben i like reqovery gold

[@rizdalegend]

Build a tumbler with used carbide inserts, then a float tank, then reap the rewards

[@UQRXD]

That's crazy.

[@sheldonlatimer6688]

Hey Ben when dose the street scraping season starts up again

[@eWasteBen]

This weekend if all goes well

[@aredditor4272]

Use a paper shear for gold fingers. Ingento maple wood paper shear is one of the better ones.

[@glennbruce5567]

As time has gone on then boards have become cheaper and more cheaply made, now in UK I can sell high grade boards, but the buyers only want large quantities like 100kg which takes a long time to build up as a general scrapper. The rest I just take what I can like copper and aluminium, then they go into shred.

[@jonny8252]

I want to see that you turn and start making gold bars out of your pyramide stock saved haha

[@greekgods3399]

love it

[@ebikescrapper3925]

I can't find anybody be to buy them in Glasgow (UK). I just take what I can off them and put the remains in with light steel

[@elong6160]

Thanks man 😊 showing what can be done ✅ if you give a shit 😊

[@adambuysyuckyhouses]

Drop it in ap and do a video!!

[@markavargosr36]

let us hear about the positive comments..

[@elong6160]

Please take the time to do the same thing. It means something 😮

[@krystiankucharski7299]

Yayy 🎉🎉🎉🎉🎉

[@adambuysyuckyhouses]

Its silver and palladium

[@markavargosr36]

a big paper cutter would cut them perfect.

[@michaelwisdom1867]

Your a ausi mate.ve proud

[@elong6160]

Hi, I need comment on this one, we are still getting e-wast 😢

[@kevinsturgess1475]

👍

[@tawnihaynie1065]

👍👍👍❤️❤️❤️😎😎😎. 👍👍👍❤️❤️❤️😎😎😎

[@elong6160]

Tell people how to reuse the boards 😊

[@bouchtaferhane502]

رائع يخص رفقته الترجمة للعربية

[@michaelwisdom1867]

Why. Do you keep talking about usa

[@DavidMadeira29]

Dude's sarcasm is higher than Panzers boards...

[@steffybael1245]

why sell your boards, EVERY PERSON IN THE ENTIRE PROCESS IS GOING TO MAKE MONEY, AND IF THEY HAVE EVEN 1 EMPLOYEE, THEY HAVE TO PAY THAT EMPLOYEE A WAGE TOO! IM SAVING EVERYTHING I CAN GET MY HANDS ON TO PROCESS FOR EVERY METAL THAT IT WILL CONTAIN!!!

[@nathankudlaty6263]

Seems like such a waste of time for what else you could be soinf

[@andrewhowe7398]

Dos anyone no where I could sell my boreds in England