Ex Military International TD15C Dozer LOW HOURS C&C Equipment Dresser

[@alscompleteoutdoor9091]

That's friends is piece or art plain and simple....beautiful dozer

[@allenbowick4716]

What a beautiful OLD HORSE!!! The very first dozer I ran was a 1972 International TD15C with the ever faithful DT466 in 1996. Always fired half a turn even when it was below 32 degrees. She may not have been the fastest but there wasn't much that could out push her.

[@Obamaistoast2012]

I have the exact same unit, bought it 20 years ago for 5000.00 still using it today.

[@mattcrowell7945]

That's a one of a kind! Most of those old td15c's around hear have been wore out and rebuilt 2 or 3 times by now. These were some good old tractors use to be lot of them working around here

[@C_CEQUIPMENT]

For sure I grew up running them

[@mackman1480]

I used to run one of those on the Canadian Dewline back in the 1980's and 90's clearing snow in the high arctic. Nice medium sized dozer lots of fun.

[@rossgray3070]

Awesome machines in their day, I spent over 20,000hrs on TD 15 in NZ, great performers, hands only steering, single lever for blade control and 6 inches more ground clearance than a D6 C, D. We did have some engine problems with the 466, the rotary fuel pump on the early model was one, and had one that spun a big end bearing ,and another that put a rod out the side but that was back in the 70s. Out fit I was with were all IH back then TD 8 E, TD 15 C, TD 20C & TD 25s.

[@logdog8920]

Nice TD15-C, They were real good machines. We got an old TD20-E, also a 1999 TD-15 E. Back in the "Day", IHC's were top notch machines. They had the best final drives, at that time, also the first somewhat modular componentry, for easier maintenance/rebuild.

[@C_CEQUIPMENT]

Thanks Yes they were far superior imo in 70s and 80s

[@alkennedy1124]

I need a useable all wheel drive all terrain small fork lift , or loader that will lift and carry cars and truck to my crusher, 8 feet wide max ,possibly 8.6 wide, inexpensive second hand none smoker , none oil burner, no leaks in the hydraulic systems, and good tires,inexpensive, ok thanks BigAl California, 5,000 to 10,000 maximum, praise Jesus grace Christ amen 🙏.

[@idessaoutlaw]

I had a 1981 International TD7C with a 6way blade, winch, and the forestry package. They don't make em to use and last anymore, only to sell. That's why I'm still running my old iron today. 1968 CAT D7E, 1976 CAT 225, 1986 CAT D4E, 1986 GMC GENERAL BIG CAM 400, 1993 PETERBILT 379 CAT 3406B, 1996 International 4700LP DT466, 1982 FORD 8000 CAT 3208, and many more oldies but goodies..😎👌

[@jeffreyhershey5754]

@@idessaoutlaw try a d8 r series you'll find there the most responsive for the hydraulic

[@idessaoutlaw]

@@jeffreyhershey5754 Yes.. I ran a D6R and a D8T awhile ago and they were nice. 😎

[@3069mark]

Stunning machine! I've loved dozers since I was a little boy and played with toy ones in the back yard. I got to drive a real one once when I worked on a paving crew in the Summer of '77, but it was just to move it down the street is all. It was a John Deere. I only like the old pre-electronics & pre-computer iron though.

[@dennisadorno6721]

One of the first machines I ran was an International 175 loader. A pushing fool!

[@Mad.Man.Marine]

What a sweet dozer!! Nice paint work taboot.

[@sixmileconstruction6837]

Beautiful machine, just rebuilt our Dt466, steering clutches,and transmission in our Td15. It’s a power house

[@randyschneider6086]

I had an IHC truck with the dt466 a great engine,I also had a TD14 but it had a four cylinder engine,a 466 in it would of awesome.

[@randyschneider6086]

Are the top rollers oil lube?

[@rodcrozier888]

Great job, the finished product looks really top notch

[@fxpestoperator5527]

What a beauty!!!! VERY NICE MACHINE!!!!!

[@rayinpau.s.a.6351]

I am sure we have all said this , But its incredible what a paint job can do ! , excellent job .

[@48retrop]

A Dupont overhaul.

[@MikeM-ww3so]

@@48retrop go back and look at the rails rollers and sprocket again. The airforce .. Did Not Use it. The things almost new 😆

[@ronaldheit196]

Nice dozer. I was impressed about how seriously you took Mike Dirt Perfect's problems with the dozer he bought from you. It'll be a hugely helpful addiction to his 3 dozer fleet. Especially with an enclosed can with air, heat, radio and that seat. Much less strain on the operator.

[@MarkSmith-dh5dh]

Hmm! We got a scraper when I was with uncle sam that had been in a warehouse for yrs before it was dropped on base! Cat twin engine scraper with low hrs too. #USAF 🇺🇸💪

[@martiniv8924]

Sounds beautiful 👌🏻😎

[@scotabot7826]

Man that thing sounds good!! WOW!!!

[@snowfire45]

Awesome unit !👍👍👍

[@willcojak9650]

That is one nice unit!

[@throws56]

Sounds amazing.

[@johnharrisonpippin7126]

Yeah, really like that IH!! Real work horse!

[@garthmiller6932]

That's a good looking cat man I like that pipe leave it just the way it is.

[@williamcartledge8641]

Beautiful

[@bhermon265]

Looks great nice dozer 👍👍🇦🇺

[@davidyetter5409]

Big Boys Toys.... Gotta love it.

[@brad8179]

That sounds amazing

[@drive9997]

That’s part of my lotto winning list

[@ianmangham4570]

Awesome condition 👍

[@localcrew]

My homeboy Larry has the older version of this tractor. Think it’s a “B”. I may try and buy it cause he just got a D7F. You can see it running on my channel.

[@feelnrite]

Super nice.

[@waffleninjanz]

very nice

[@adailtosantos4486]

Eu já trabalhei no td.21.

[@nathanpeterson6321]

Turned out awesome

[@russhaper1705]

Dirt Perfect needs another one.

[@Peterbilt359]

I bought an ex military D7G they come with one problem. We blew hoses so we changed every single hose, then lost o rings on sleeves. Had to get a new engine. They were parked for 40 years so everything made of rubber was rotten. Even when they looked new

[@clinthowe7629]

Oh yeah, sweet!

[@nobleroofinggeneralcontrac7961]

Not even broken in nice!

[@josevarela834]

Now built in Poland called a Dresta.

[@p71collector]

Original mil-spec chrome exhaust pipe on it too? I think not.

[@MitzvosGolem1]

beatiful IHC ruled then .

[@radioace318la]

what a fine old beast. Is all of that military hardware for sale in the background? a nice collection you guys have.

[@C_CEQUIPMENT]

Yes everything is for sale

[@rubenshartman]

How much did it go for?

[@seize1563]

Beautiful Machine. I'm guessing she sold pretty quickly?

[@C_CEQUIPMENT]

Pretty much the same day!

[@russellrankin7980]

Nice Machine

[@CraigHall-gf4pt]

Where are you located and is tractor available

[@arthurmckevitt4444]

What is it worth. Regards

[@williamsmith3960]

have you sold it yet would like to get a quote on price if you haven’t

[@C_CEQUIPMENT]

It sold very quickly

[@johnminyard1054]

Where can they be seen are they for sale

[@azwrenchmaster5334]

what's that little john deere to the right of it at the end?

[@lukedesselle2491]

Where is this dealership located??

[@C_CEQUIPMENT]

Nashville Indiana

[@alk315]

How do we contact you?

[@38possum]

How much they going for?

[@C_CEQUIPMENT]

Its sold

[@38possum]

@@C_CEQUIPMENT Dang!

[@elcaballoloco7288]

how much?

[@biffjoy6951]

How much?

[@marcosramos4596]

How much did he want for it?

[@perrysmith6872]

I'm interested n it whats the price tag ?

[@C_CEQUIPMENT]

It’s sold

[@scottshook7846]

How much you want for it

[@C_CEQUIPMENT]

It’s sold

[@vincenthalas7055]

See if Dirt Perfect wants it

[@bujang_Kalem]

😍😍🔴🔴🎥

[@als8326]

She is Beautiful too bad it wasn’t a Seabee dozer 🤷‍♂️🐝🇺🇸

[@teebugg66]

How much is it?

[@C_CEQUIPMENT]

It’s sold

[@Darkrif1957]

there the wrong ripper shanks lol

[@thenussbaum44]

Does the A/C work??

[@C_CEQUIPMENT]

Real good right now!