EXO's 30,000 WATT Amplifier RACK BUILD Pt.2 | Installing Toolmaker Amp Inputs & Mounting BASS AMPS

[@scottferris3205]

I think It's so cool that you are doing everything on a low budget in your driveway. .just shows with enough motivation anything is possible. ..keep it up brother

[@EXOcontralto]

Same tools for years too :D Thanks for noticing man!!

[@ratpinscher]

Your watts to washers ratio is about even. Good job!

[@lowhertzhighspl]

haha

[@THEOLYMPIAGUY360]

😂😂😂

[@gozer722]

You give us a lot of inspiration.. I am a Basshead since late 80's early 90's and still to this day in my mid 40's love watching your vids and others like you. Really like how you show us the "dirty" side of being a Basshead , and through a lot of hard work and dedication you can achieve your goals. I currently have about a 2000W RMS system with 1-15" Fi-BL and 6 components and can only imagine how loud violent these 30-40k watt systems are. Keep up the good work EXO

[@EXOcontralto]

I really appreciate you taking the time to write me a comment. It's reminders like this why I love making videos so much. 🔊🔊🔊

[@LeoEnigma]

one thing i love about watching your vids is that u prove to us nearly every video that you dont need a fancy shop or fancy expensive equipment to pull off awsome work and great systems. keep it up exo

[@EXOcontralto]

Amen man, I'm just a small town dude with a couple power tools and a big idea :D

[@tatert.v.9908]

Oh yeah!!!It's great to see all the comments being so encouraging!!!I'm glad Exo has awaken the sleeping giant!!! Well done once again exo!!!

[@rhkips]

Oh wow, that reversible beauty panel on the amp is a freaking brilliant design detail! Hats off to Crescendo for that!

[@EXOcontralto]

Good ole Nendo :D

[@nathanh5344]

Watching this in the middle of work. Completely worth it.

[@alexamaya5663]

Can't wait to see what Frankie does with the new power! IT'S ALIVE! IT'S ALIVE!!!!!

[@vicvar8991]

You're an inspiration to us bassheads trying to step our systems up

[@EXOcontralto]

That makes me smile man, thank you!

[@LegendaryGarageYT]

I had to flip the logo on one of my crescendo 3500s to get them to match it was a lot simpler than I though very beautiful clean instal man I love the orange of the crescendo amps

[@EXOcontralto]

Tell me about it, Something about the orange just pops!!! 🔊🔊🔊

[@redjenkins4128]

man i have never met you but you are the man i have learned so much from you thanks

[@EXOcontralto]

Makes me happy to hear that, hopefully meet someday at a show 🔊

[@thomsmendheim]

Dude I enjoy watching your videos you are inspirational for me because I've been into audio since I was a teenager been installing for a couple years myself but not on your scale just yet I'm about to venture into the walled world soon I've got an 06 Chevy Malibu with 2 DC LVL 5 12"S ON a DC 7.5k but about to rebuild the subs up to 18" starting with 2 for now but planning on adding 2 more on 2 7.5k hope when it's done I get to see you again at slam to give you a super beast mode demo FYI the truck looks freaking awesome I've been following it since the beginning hope to get a demo in it some day but for now thanks for all the videos and all the lessons on how to do some sweet audio stuff check you later bro I'm ready to see how Frankenstein gets down when your finished

[@EXOcontralto]

Wow man, that's awesome to hear. Glad you enjoy the bass bug like all of us 🔊 Also, thanks for watching and taking the time to slap a comment. Means a lot man, goodluck on the project!

[@zambiekillah]

dude you are a straight up god when it comes to this!

[@EXOcontralto]

Far from that, but it makes me happy to know you enjoy the projects! Learning something new everyday

[@zambiekillah]

Oh yeah, your videos are always great

[@timbowman8150]

Dude, u be doing so much with so little (tools & equipment) it amazes me. Keep up tha great work man! Maybe one day I can experience your work live in person.

[@EXOcontralto]

Makes me happy to read man, not everyone can afford expensive tools so it's nice to show people you don't need to have the best shop to get good results. Thanks for the comment 🔊

[@psementalist]

Sweet bass action brother that's what I'm talking about looking totally clean and extremely tight .

[@ericayala1738]

im so freaking anxious and exciyed to see Frankenstein play!

[@jacobparker4727]

Hell yea exo!!!!! That last install is looking bad ass very well planned out!!! Keep this shit coming I'm tuned in as always!!!

[@EXOcontralto]

Much appreciated man!

[@djhaloeight]

Its comin along very nicely Exo!! Keep it up!

[@nvmyutube]

another great vid EXO , frankies starting to look really good ! , your giving me lots of inspiration to push on with the planning stages of my own amp rack build. as always looking forward to the next video ! -

[@chrisd.9134]

Dude ur video's are getting better bro.

[@EXOcontralto]

Thanks bro, been workin my ass off, glad it's showing in the videos as well 🔊

[@dr_skipwith]

1:01 That is the best message tone I've probably ever heard. 😂

[@agustincastillo4710]

EXO I want to see the final product!!!! Cant wait!

[@jackpurvis3105]

Yo exo my dream before I die is to have a massive build done by you. You're pretty awesome.

[@keithsanders1781]

you've given me a lot of confidence to do a lot of cuts in my ride LOL thank you my man :-)

[@mcelroy2092]

nice job man!!!...can't wait to hear it slam again...its been far too long!!!

[@EXOcontralto]

You're telling me! :D

[@hayabusa2919]

Love the double inputs so aggressive

[@TheTherealdarkhorse]

Congrats man. Really happy for you.

[@EXOcontralto]

Many thanks bro, I'm so happy tooo!

[@manuelmartinez8832]

awesome work exo. You don't have a shop but your work is still incredible :-D

[@sameerwilliams6583]

Manuel Martinez I agree

[@SonicElectronix]

Epic!

[@sgtJOOSEcapeS]

😂I should be doing something productive but instead I'm here watching EXO be extra with installations from 6yrs ago😂

[@shawnmiller9678]

I would need a bullet proof camera I can't keep a phone for a week without cracking it or breaking it I more props to u man I have social anxiety this is one reason I don't take mine to shows or do many demos I have severe anxiety attacks but building a monster system with bass that shakes ur whole body it calms me

[@tojomanni]

Awesome EXO! Frankenstein will sure be pumpin some bass in no time haha ;)

[@skeezixmccat]

I would love to get a demo from you one day. Oh man that'd be awesome!

[@225rc]

exo don't forget to show us how to wire things up and where each wire is hooked,,,great time for you to teach a class on hooking everything up and how it works together

[@EXOcontralto]

You got it bro!

[@225rc]

Thanks brother, you have one of the best shows on yt...I've commented many times but never got any answers about time,,lol...just messing with you have a good one...

[@ericaugustine5823]

Good work ! Can't wait to see it all done !

[@EXOcontralto]

Shouldn't be long now, just waiting on battery under the hood!! YEAHHH

[@soundman_caraudio]

👍👍👍

[@bigbabykirven]

dang bro watching your videos makes me wanna get busy working on my truck right now!!!!, but it'll have to wait till sun up tomorrow😞😞😞😞😞😞

[@EXOcontralto]

Get busy man, good luck!!!

[@johnreese2765]

Getting excited seeing franky come back to life! If you want that copper staying pretty try Defthane Platinum finish works on metal will handle mild heat. find it at Ace hardware , Home Depot. keeps stainless steal, copper and other metal from tarnishing. The best finish on the market, my personal opinion derived from a long history of use and have tried everything else. Makes wood gorgeous brings out true color and a brilliant luster! Comes in high gloss and satin/matte finish. If interested or need tips just message me for my email.

[@EXOcontralto]

I appreciate the suggestion and the comment man! Many thanks 🔊

[@johnreese2765]

it is a urethane, better than enamal wont chip or crack it is flexible expands and contracts with temperature.

[@keystonelifter7018]

Lol those are skateboard truck bushings he is using for the washers that is a awesome idea I would have never thought of that thank you

[@casemods]

Goped deck hardware works better.

[@anthonymontoya5565]

Once again EXO you the MAN!!!!!!!!!!

[@COMPASBASSCHICALI]

Its great to be able to change logo like that!👍

[@drateryako]

OMG, i cant wait till its all done, i want to see your truck bangin again :D

[@mr.dpfaquariums4560]

great job ....I like how it turned out, it looks really good.

[@EXOcontralto]

Thanks man, I'm liking it too!

[@MikeDMays]

Looks good on the power side of things! Do you plan on doing a more reinforced build on the inside where the head unit is? Something that MIGHT hold together and keep that beast a little more stable..? Also maybe a support bracket or something for the fluids under the hood..?

[@1_sl0wrx]

where did u get those clear mounting pieces? I like that. please let me know

[@EXOcontralto]

Home Depot

[@1_sl0wrx]

thanks EXO

[@wyomingbassheads9148]

Need to save up get a second sp4 15 and a crescendo 5500. Looking good as always EXO!

[@gotshirts2ink]

Man I can not believe you have not upgraded any tools yet with the amount of subs and views I would look for a partner like milwalkee or ryobi or dewalt get some free tools man

[@vicvar8991]

Awesome work exo. Your a beast man.

[@Mikey_2031]

love your videos mate learned heaps, them 5500's look killer cheers from Tasmania

[@Vodnik110]

definitely progressed so far though! good work!

[@jessever3655]

well in mate. lovin the vids. greetings from kenya.

[@EXOcontralto]

Wow, that's a hike away! How is the car audio scene out that way?

[@jessever3655]

thanks for the reply exo! been following you from your beginning audio days!!! car audio scene here is huge but here we have lack of good audio shops, main things we get here is pioneer and kenwood/ sony.. im the only one with 2x 18 inch mayhems on 10k rms. still waiting for it to get here. will start uploading vids once i get my gear. i have learned a ton from u. keep the vids flowing man, u do great work.

[@lowhertzhighspl]

Are the studs long enough for Taramps? (Studs on the dual amp inputs) And will SHCA 2/0 XL wire fit in them? Thanks whomever.

[@2nsane2005]

I love watching your videos! you have great attention for detail!

[@EXOcontralto]

Took a while to get there, but I'm glad you enjoy the build man!

[@2nsane2005]

EXOcontralto where do you get most of your cables and ring terminals etc?! Online??

[@johnreese2765]

woooo looking awesome! what amp and subwoofer power configuration are you going to run? voltage, strapped or not ohm loads ect.

[@jannik9853]

noooooo i need more exo...!!! can#t wait for the next episode :)) keep it up

[@u9Nails]

Last time we watched you use spray glue some tiny insect volunteered to be part of your build. I can't help but wonder if any of that guy's family joined in on the build. :)

[@EXOcontralto]

Hahah good memory!! That was hilarious :p

[@jake_halo]

cant wait to see how this turns out never seen such a beautiful amp layout

[@edwincintron3625]

EXO PUT SOME CUSTOM RIMS ON THE SATURN BRO.

[@EXOcontralto]

She's got some rims!!

[@CarlosZ-ik7xn]

hope we can see some bass tommorow

[@12Messenger]

Makes me wanna build a wall with 4 10s (not 15s and 18s that's too much-I'm a slight bass head not extreme). I was actually thinking about that ideal with 4 soundqubed hds3 10s on 4 hifonics zues 1200.1's (running each sub to its own amp) with 4 kinetic hc 1200 batteries

[@MarkFlower99]

Great work exo keep up the good work :D

[@nicolas_h9090]

It looks *AWESOME* !

[@N7-alpha]

latex gloves make the no finger print thing a lot easier EXO...

[@gotshirts2ink]

Do you think you should have used Lock Tite for the amp rack nuts that are inside the box? also What are your thoughts on using Bolts & Nuts in the holes for the speaker wires?..

[@EXOcontralto]

Not at all, these things aren't going anywhere. Nuts and bolts are fine, but nothing beats direct connection.

[@kostadinkaradjov238]

nice work man ! i like your work .

[@rockymtnredneck4888]

EXO, been waitin for you to get back to Frankenstein! Good to see it being put back into service. If you're worried about the copper staying shiny, maybe try clear coating it? The cables don't need to touch the outside, right?

[@EXOcontralto]

I ended up clear coating the ones you see in this video, great minds! :)

[@motorsandmayhem1020]

looking great bud. Love the channel, some awesome ideas. Keep up the good work :)

[@EXOcontralto]

Thank you kindly, I'll be sure to keep the updates coming! 🔊🔊🔊

[@MyStonerMind420]

Nice work man

[@EXOcontralto]

Thanks bro,much more on zeee wayyy!

[@gioarteaga3984]

dam bro your insane..got to love it keep up the good work ...

[@basshead9793]

So exo what are you going to do with that dash? On 15k you were ripping it apart now on 30k its going to crumble lol any plan's for it?

[@EXOcontralto]

That'll be a fun time, we'll see what she does then address it

[@Ernzmoneybeats]

Bro thats pretty sick. Real sick. . I dig it.

[@SwishaMane420]

WHOOOO SHIT, my ninja EXO... thats looking fresh mayne!

[@mephInc]

you should be running grade 5 bolts for your application. grade 8 is stronger but has a lower sheer strength than grade 5. grade 5 won't snap, they'll bend.

[@MJamal55]

He exo where did you get those clear mounting things from?

[@EXOcontralto]

Home Depot

[@MJamal55]

+EXOcontralto Thanks!

[@taylorc2262]

looks so great!!!!!

[@BowtieForLife420]

still have the aluminum ones? id love to buy a set or 2 from you. awesome job mang. looks hella good and clean as always

[@EXOcontralto]

I sold them a whole ago to make way for these :p

[@BowtieForLife420]

EXOcontralto i thought so but wasn't to sure. thanks tho mang

[@danielmoraes9637]

nice work!

[@faust5392]

изолировать контакты на усилителе нужно!!! классно, смотрю все выпуски!!!

[@travisstuchl]

Keep them awesome videos coming 😆

[@EXOcontralto]

You got it man! Just found those decals you sent, I almost forgot about them being so busy lately. Thanks again for allnthe support throughout the years :)

[@Des420]

Notice the different spacing on the terminals? The dual terminals are offset so there is a larger gap between them... You got it correct with two sets and incorrect with the other two.

[@EXOcontralto]

The inputs are not offset. The different spacing you're noticing is from the remote slot.

[@Des420]

***** The posts on Sky High dual inputs are offset and result in that gap difference if they're on the wrong side... I thought these ones were having the same effect. Looks like I was wrong.

[@Smokin07ram]

Looks so awesome EXO !! Those spacers are brilliant! Can I ask where you got those? Those amps are heavy! Just got our two and they must be 40 pounds each!!! Would have been a bitch to put that thing up alone! What a stud! :)

[@EXOcontralto]

You can say that again! I got the spacers at Home Depot, right near the suction cups and 3m double tape

[@mwts637]

why not use nylon nuts, to protect from loosening from the excessive vibration?!

[@plutovxbes2184]

Exo I love your work you are so creative

[@EXOcontralto]

I appreciate the kind comment, thank you

[@edgeofvamp]

What are you using for the rises/insulators?

[@AaronBilger]

I really enjoy your videos EXO

[@stephenandersen625]

just curious is there any chance that the positive terminal could arc to the negative? I srink wrapped my negative terminal because I was worried about this happening

[@EXOcontralto]

I have some small inserts that prevent anything from arcing if loosened, but I've ran these before without issues. Looks much better without anything covering them.

[@skeezixmccat]

The voltage is wayyyyyy too low for that to happen unless they were super close. With terminals like these it's not hard to get them really secure so I think it's much safer than it looks.

[@Schniels65]

1000v=1mm arc

[@southsidetv773]

Where did you get those clear spacers at?

[@blackrosetiger13]

Nice day today

[@zaceryhammond1144]

Hell ya another video 👌‼️

[@bretscranton5803]

Where do you get those rubber standoffs?

[@LegendaryGarageYT]

bret scranton Home Depot has them most people use chair stoppers that you would put on the bottom of chairs and furniture to stop them from sliding around

[@jfox949]

great work exo. everything i-a nice and clean

[@EXOcontralto]

Thanks bro, i wanted to be patient and do it nicely. Glad you enjoyed!!!

[@jfox949]

No problem brother. I enjoy all your videos. since the first van... Im hoping to meet u at a show sometime soon.... because of u'r video I'm getting ready to buy 2 psi platform 5's for my trailblazer on my ns1 amp... so again thanks for your videos.... do u have stickers so I could show support of u'r channel on my truck

[@lawrencecoore2021]

am loving it Exo

[@robertgarrett811]

EXO just to let you know I did pull the trigger 4 deafbonce 12's Just Like the you had

[@EXOcontralto]

HELL YEAH MAN!!

[@lstephenson247]

Looking good man, where can I get some of thoes clear plastic pieces you are using as feet under the amps?

[@zandd_bros]

I'm wondering this as well, please tell us lol

[@timothyhinton5665]

+ZandD they look very similar to the bottom of kick down door stoppers

[@EXOcontralto]

Home Depot

[@star1only]

looking sweet now u done that with the 2 extra amps

[@EXOcontralto]

Thanks man!

[@star1only]

no worries dude I've followed the whole of your videos I'd love to be able to build my own

[@EXOcontralto]

Any ideas on what you'd like in the future? Big wall, maybe?? 🔊🔊

[@someone_else303]

looks awesome dude!

[@abrahamg200]

good job 👍

[@angelstudiosmggsg3196]

looking good man keep it up

[@CoryYroo]

Yo exo i don't know if you thought of this but, how are you going to get to the allen screw on the bottom of the copper connectors with them installed?

[@EXOcontralto]

These were only installed for wire getting the correct wire spacing. Takes about 2 seconds to unplug them once the wire is ready

[@johnfurious8419]

Looks GREAT!

[@EXOcontralto]

Thank you much! 🔊🔊🔊