REEFS RC BEAST 1000 AND BEAST 2000 5th SCALE SERVOS

These Beasts are BEASTS!!! They have POWER and SPEED!! Links are below for the Servos make sure you guys use them. I have also linked up a few DBXLE parts so check those out.
Check them out here at www.reefsrc.com
Beast 1000 www.reefsrc.co...
Beast 2000 www.reefsrc.co...
HRP also has these in stock
Beast 1000 www.hobbyrecre...
Beast 2000 www.hobbyrecre...
Beast 1000 Specs
High Torque High Speed Brushless Servo
INCLUDES: REEFS SINGLE HORN / REEFS DOUBLE HORN
SUBMARINE WATERPROOF: 7 Point Seals
Magnetic Angle Sensor
Pulse Width Modulation Control
Voltage 4.8V - 8.4V
Mechanical Angle: No Limit
Internal: Steel Gears / All CNC Aluminum Casing
Bearing Type: 5 Ball Bearings /
Wires: 22AWG
Weight: 10oz / 285g
Dimension: 2.59 x 1.18 x 2.32 (LWH)
Torque: 800oz @ 6v/ 900oz @7.4v/ 1080oz @8.4v
Speed: .11sec @6v/.095sec @7.4v/.08sec @8.4v
Spline: 15T / Dead Band Width: 2uSec
BEC Not Req. Recommended for max performance
Beast 2000 Specs:
High Torque High Speed Brushless Servo
INCLUDES: REEFS SINGLE HORN / REEFS DOUBLE HORN / 3S & 4S CONNECTOR
SUBMARINE WATERPROOF: 7 Point Seals
Magnetic Angle Sensor
Pulse Width Modulation Control
Voltage 7.4V - 16.8V
Mechanical Angle: No Limit
Internal: Steel Gears / All CNC Aluminum Casing
Bearing Type: 5 Ball Bearings /
Weight: 10oz / 285g / Wires: 22AWG
Dimension: 2.59 x 1.18 x 2.32 (LWH)
Torque: 1000oz @ 10v/ 1250oz @11.1v/ 1450oz @12v / 2000 @ 16.8v
Speed: .10sec @10v/.11sec @11.1v/.10sec @12v/ .09sec @ 14.4v / .08sec @ 16v
Spline: 15T / Dead Band Width: 2uSec
Losi DBXLE Vitavon Parts on Ebay
Center Transmission ebay.us/Yb8Nt6 (Silver)
Center Transmission ebay.us/xyD9zb (Black)
Front Bulkhead ebay.us/Pu5v7B (Silver)
Front Bulkhead ebay.us/gYfyxW (Red)
Front Bulkhead ebay.us/oddIYI (Black)
Rear Hubs ebay.us/t1fhWY (Black)
CHANNEL MEMBER INFO
If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4,$10,$20, or even $50 depending on your level. Take a look! / @exocagedrc

[@Bawla187]

Can't wait to see it in your Kraton 👍🏾

[@silly_d_williams2167]

hitec d845 has been my fav 5th scale servo to This date... put one in 08s exb, kraton 8s,and my Dbxle 2.0

[@JustCallMePCra]

Maaaaaaannnnn I can not wait to get one of these in my gas DBXL… I’m so excited to see how that thing runs when driving!

[@ExocagedRC]

What battery do you use? 2S 3S or 4S?

[@JustCallMePCra]

@@ExocagedRC 4s. This car is almost 43lbs with my add-ons and swapped motor

[@JustCallMePCra]

Been over volting a spektrum for about a yr

[@GreatLakesRC]

Yeah, wow! 😱

[@Addicted_2RC]

Well that’s a proper name for such a BEAST of a servo!!!! 👊👊👍👍

[@jeremymiller2340]

Looking like the mini maxx is getting an upgrade really soon!!!! Amazing servo, nice review brother!!

[@ExocagedRC]

These wont fit that sorry

[@rogueFactor]

wholly geez. i just ordered the 2000 for the Outcast EXB 5th scale project.

[@fernsolo]

Wow, just wow 👍

[@eastsiderc]

Very cool brother WOW IS MORE LIKE IT!! CHA CHING goes the sound of the billet horns!! Now I gotta have one of these ! Great channel bro! 🤝🤝🇺🇸Subscribed!!

[@johnboy6955]

Man those things are insane. Those are some awesome servos. If I had a xmaxx Keaton 8s or dbxl I would definitely be using one of those.

[@ExocagedRC]

Yeah they won’t fit an Xmaxx without a LOT of cutting and grinding. I wish they did fit

[@johnboy6955]

@@ExocagedRC yeah those would be awesome in a xmaxx

[@daveat957]

​@ExocagedRC, im going to make it fit in my xmaxx, what 4s battery did you have?

[@old-rcplane-phart]

Wished these were available 2 years ago when i had my gasser.

[@mrstanton81]

Wow! No joke servo's!

[@bbeckers24]

Beast is an accurate name for sure.

[@djbigt126]

Badass

[@Jsmith9619]

Drinking game: everytime you hear "Yeeeeaaahhh" take a shot

[@ExocagedRC]

LOL did anyone get wasted?

[@harbinger26]

Had to go to the hospital before he mounted the servo 😂

[@ChiefRickyRC]

Gonna need some big servos someday sweet

[@silly_d_williams2167]

man I need that beast 2000 in xmaxx.. bet ya have to do all kinds of chassis cutting lol it needs that servo! great information 🍻

[@ExocagedRC]

yeah, way way too much and even if you get it in there the servo saver will ruin most of its power unless you lock it out.

[@DirtyDriveAway]

Hey Exo, have you tried fitting the 2000 into the vitavon centre chassis. I see in one of your previous videos you fitted the 1000 into your monster max4 setup. Have you tried the 2000? I know it won't fit into the stock chassis but the vitavon comes equipped for a 1/5 servo. I have a vitavon chassis on its way and for the extra few quid wondered if the 2000 would be a worthy fit instead of the 1000. Cheers

[@redvikinghobbies]

Those are crazy. Lord!

[@ExocagedRC]

yeah man, these are going to be THE 5th scale servo for racers

[@seanclarke4061]

So strong, and the speed is amazing as well. I'd be fine with that 1000 beast haha. Not sure why my LHS guys swear off reefs products.

[@johnboy6955]

Your Lhs guy must not have ever used reefs I love their products some of the best on the market IMO.

[@ExocagedRC]

Yeah idk why they don’t like reefs but they are missing out.

[@johnboy6955]

@@ExocagedRC absolutely I’ve got a reefs in all 3 of my vehicles and will be in all the other I get i really like the raw 500. Also looking to invest in a few reefs micro 99’s

[@wr2042]

Sean he may be against them because they are actually made by AGFRC and sold under the Reefs name. Unfortunately that's just how it is in the world of RC electronics, alot are made by one company and rebranded and sold by another company.

[@wr2042]

@Andrew H. yeah I agree with the price, on AGFRC sells quantities of 50 or more of their servos for like 50$ each and then people sell them for over 120$ in my eyes making 70$ on a 50$ item is excessive. I know they have overhead but if someone started a company selling AGFRC servos with only a slight markup they would probably make more in the end because more people could afford them in every rig they own rather than only having one rig with their servos in it.

[@theirishaxe9405]

This 2k is gonna have to go in my xmaxx. I got the triple 5 in my summit running 40 series rc4wd mud slingers heavy tire and it's fast and silent I love it. Also lololol nice animantiam drop lol make sure to set your end points!!!

[@ExocagedRC]

It won't fit an xmaxx, sorry

[@silly_d_williams2167]

you'd have to cut half ya chassis away to even try it in xmaxx 🤣

[@SIMONC256]

450 wow

[@mossyhollow3732]

Now your servo saver is there to protect the car from the servo.

[@ExocagedRC]

LOL good point!!

[@old-rcplane-phart]

#1 today! (Dammit. Cause i don't sleep 😳😳😳)

[@mikep.9338]

Helluva servo 👍🏾👍🏾👍🏾

[@ExocagedRC]

Yes indeed

[@boosieboo497]

Yyyeeeaaaaa

[@3SonsRC]

Those are insane😱😱😱 But insane MONEY 🤑🤑💵😱😱 as well.... It's perportional I guess but $400 and $550 as much as a new rig but I guess it makes sence for the quality, power, and size. You should do a servo review for 1.5 and 1/8 scale Servos in the

[@ExocagedRC]

True there are a bunch of servos out there now

[@letsgetitrc]

WOW is about all I got also 👍

[@local24_]

It would be so funny to see a 2000 on 4s in a superlite 😂😂

[@ExocagedRC]

LOL its stronger than the truck!!

[@mojaverc1585]

It would be able to snap the chubs off

[@ardesheerford1741]

Where did you get the batteries from for the Beast 2000?

[@Captinfun101]

Yeeehh ! Ok where do I get two two thousands for my kratons

[@ExocagedRC]

links in the description

[@willyemsmith5810]

Random thought here but hear me out. I know your an electric guy but I think you should look into the Traxxas T Maxx 3.3. it's definitely a nitro but I think you would enjoy it with the way you jump your trucks around. Might be a new experience?

[@ExocagedRC]

I've messed with nitro before, its not for me

[@willyemsmith5810]

Cool beans well keep up the amazing work I love your videos. 🙂

[@kylekruger1848]

Do you need a bec for if I have a max 4 with the 2000?

[@sprather84]

How about in the Xmaxx Joe??

[@ExocagedRC]

it won't fit

[@sprather84]

@@ExocagedRC dammit thanks Joe u just saved me $400

[@Houleigan]

Cool servos but way too expensive for my bank account

[@ExocagedRC]

The more serious racers will be all over these, for us bashers they’d be nice but cheaper options are out there

[@stikupartist3698]

Would these be good for hpi baja?

[@Ryder626]

Can you put this servo in the xmaxx ?

[@daver18qc]

What about putting them on your servo tester to check the specs are true?

[@ExocagedRC]

Thought about that, I kinda doubt my tester would hold these due to size and then the strength.

[@johngantner9314]

could you do a how to video on installing one of these into an Xmaxx?

[@ExocagedRC]

Buddy these require a MASSIVE amount of cutting to the chassis, they don't fit at all.

[@johngantner9314]

ok thanks. guess i will try a savox

[@FRANKIEGBANGEMS]

I got a 2000 coming with a bec so I can max it out for my dbxl

[@ExocagedRC]

Beast 2000 and a bec? They need direct power to 4S.

[@FRANKIEGBANGEMS]

@@ExocagedRC I was gonna program the bec to give me 16.8 volts. That worked on my reef raw 500 but not that much voltage. Why wouldn't it work with the beast?

[@FRANKIEGBANGEMS]

CC BEC 2.0 14A Max Output 14S CSE010015400. I bought this one. I would think it would work

[@FRANKIEGBANGEMS]

I was wrong about the bec I bought it will only output 12 volts the input is up to 14s. I'm sure there is some way to pump 16.8 volts to this servo. I guess I will return the bec and just use the 4s cable it came with. God life is so hard.

[@seavil1]

What is a good battery to run on this servo alone? I have an ARRMA Kraton 8s

[@ExocagedRC]

The 1000 is only good to 8.4v. So just get an esc with a strong internal BEC and go for it

[@gunnerperez57]

Awesome servos! Will they fit the new scx6?

[@ExocagedRC]

Yeah with the adaptor that comes with the truck

[@rc-daily]

I need this for my ryft

[@ExocagedRC]

😀😀

[@whitsrcleftovers2707]

So are these xmaxx size, or even bigger? What I'm getting at, is would they fit in the Maxx?

[@ExocagedRC]

Too big for Xmaxx or the Maxx.

[@whitsrcleftovers2707]

@@ExocagedRC thanks Joe!

[@kawikarios2017]

Will 1000 fit in xmaxx

[@ExocagedRC]

no sir, its way too big unless you have the Vitavon center chassis

[@Ineffablemoments33]

At this price though I rather get 2 agfrc 1/5 scale

[@BigDreamsSmallWalletRC]

Reefs are made by Afgrc... If you buy 50 or more bulk buy. They will re brand them for you and make a logo for you ... A lot of people don't know this .. It's kinda sad to see people taken advantage of ...

[@andrakimbrough6919]

Are those prices necessary 🤦🏿‍♂🤣

[@ExocagedRC]

they are high end and they are not the most expensive out there.

[@ChiefRickyRC]

Hey friend whats the best 12mm hex wheels and tires about 3.5"/90mm diameter that can handle 100mph? I need them for a VATOS Spirit Q901 and want to keep tires same size...lol you're gonna have a part of history choosing the tires. I really genuinely don't know what to get.

[@ChiefRickyRC]

@Andrew H. I like how they sound already! Thank you saved me some trial and error 🙏

[@ChiefRickyRC]

Owe u one

[@ChiefRickyRC]

@Andrew H. those are exactly what I would of picked out of that tire line had i found them wow excellence bro👏 ✨ 🙌

[@larzhughes2144]

For this price it better be steering my real car

[@patrickfrensdorff7485]

400 euros for a servo. what a joke...

[@kenturner2946]

I’m not trying to lowball the company or anything like that but you have to be kidding me to have servos in a hobby recreational car that cost that much money makes it hard for the Hobby to continue to most people because most people cannot afford to do that they probably can’t even afford that kind of money for the entire car let alone for the steering servo come on guys we can do better than that and I know you’re gonna say well if you can’t afford it then don’t buy it well if everybody had an attitude you would be out of business??

[@BigDreamsSmallWalletRC]

There just AGFRC brand servos ... If you buy 50 or more in a bulk buy you can have them rebranded with your own custom logo ... It's kinda sad to see people taken advantage of with this kinda stuff . It isnt better in anyway to your standard 275.00$ 78kg AGFRC servo... This is a fat hustle ...

[@orion000]

Worst servos ever

[@keshajohnson4403]

400 for a servo lol