Expensive Vs Cheap 3d printer nozzles - let's look inside.

[@sypernova6969]

hey Lost. you seem anxious to a certain degree about the video, the length, spliting it all that. don`t worry about it. this is VERY VERY interesting, and it`s importnat you take the time it takes to do it right. thanks for this.

[@LostInTech3D]

Thanks for that!

[@masoneborn2081]

Amazing video!

[@MakerBees333]

I definitely got Space Odyssey vibes half way through 😆… not a bad thing but it is new style of video for sure.

[@truckerdave8465]

@@LostInTech3DI agree! I have ADHD, it’s evening, my meds have largely worn off, and I almost never WATCH KZbin, I listen. I sat and watched the whole thing! It was interesting and really well done!

[@unserfa]

second this!

[@stldenise]

If we had cinematic awards for 3d printing, I’d nominate this video! Looking forward to the results.

[@paxipax3484]

This!

[@antunrosovic7284]

You said what's on my mind!

[@darkshadowsx5949]

that was the most annoying part of the video....

[@Toaster05]

Awesome work. Macro photography is not an easy task and having tried and failed to get good results I appreciate just how much effort you've put in.

[@LostInTech3D]

Thanks! I have a fair bit of experience but this was crazy even for me 😁

[@ModBotArmy]

Super interesting video. Also crazy shots. Focus stacking is something I have been wanting to explore for really long time. Really cool to see the 3d models generated from the stacks 😊

[@LostInTech3D]

I want to automate it next 😂👍

[@ModBotArmy]

@@LostInTech3D have you seen Stefan’s work on it??

[@ModBotArmy]

If I can find it I’ll send it your way.

[@LostInTech3D]

Yeah he uses a stepper motor, I've seen it.

[@glabifrons]

@@ModBotArmy Please link to it. I've seen a ton of his videos (assuming you're talking about @CNCKitchen), but I don't seem to be able to find one about automating his camera work.

[@MTNDEWGANG]

Quite possibly the coolest 3D printer video I've seen in a very long while. Explaining how they work, how they're possibly made, voicing concerns about propitiatory parts and how clones are inferior. Showing off amazing techniques to literally get into the nitty gritty of this topic really shows how passionate you are with this technology. I love stuff like this, because at the same time I like to try and think like the engineers who make these the way they do. Seriously amazing stuff.

[@Gogeta70]

At 12:04, you say that the software needs to generate a depth map to do the stacking. Well, yes, kind of. Before I go further, I want to mention that I am an embedded software engineer. I worked at a company for 3 years working on a face recognition access control system. It involved a lot of image processing. Now, when it comes to image stacking there are a few different ways to slice this cake, but the way I would approach it is by doing a Fourier transform on the images. A Fourier transform converts an image into the frequency domain. Sharp, in-focus images contain a lot of high frequency information, whereas blurry images lack that high frequency information. By taking each image and slicing it into a bunch of ring sections, then doing a Fourier transform on each of those ring slices, you can determine the in-focus portion of the image. You then combine (stack) the in-focus portion of each image, probably doing some blending around the ring edges to get a cleaner result. This is actually not too difficult to do, so charging a crazy amount of money for software that does it is, in my opinion, exploitative. Now, processing the image to get enough 3D information to do perspective changes is on another level of complexity altogether and probably would warrant a heftier price tag for the software.

[@LostInTech3D]

Interesting. This is what helicon has to say about it (there are three methods): Method A computes the weight for each pixel based on its contrast and then forms the weighted average of all pixels from all source images. This method works better for short stacks and preserves contrast and color. Method B selects the source image containing the sharpest pixel and uses this information to form the "depth map". This method imposes strict requirements on the order of images - it should always be consecutive. Perfectly renders textures on smooth surfaces. Method C uses pyramid approach to image processing dividing image signals into high and low frequencies. Gives good results in complex cases (intersecting objects, deep stacks), though increases contrast and glare Sounds like you're describing some version of method C?

[@Gogeta70]

@@LostInTech3D Yeah, pretty close. I've never done image stacking before, it wasn't involved in the face recognition algorithm that I worked on. What I described is how I'd initially approach the problem. After implementing that, I'd test and refine it as much as I could. The end result would probably be something very close to Method C. Kinda cool that I pretty much hit the nail on the head without researching it at all! :P

[@meanman6992]

Don’t show this man a bore scope and gun barrel, he will make a documentary! (That’s a hint)

[@MrBirdmn]

He's not blasting a hunk of metal out of a long tube of metal with gun powder hoping it will land roughly in the proximity of some some arbitrarily distant target. he's trying to make sub-mm precise extrusions and movements with precise heat distribution and bla bla bla. we're going for precision more than rigidity I would probably watch that documentary TBH. haha

[@zakhughes9067]

I was thinking of a note light when he was talking about lighting 😂

[@MrBirdmn]

Thanks!

[@LostInTech3D]

Thank you 😁

[@juergenjaeger5814]

Thanks, love your content!

[@LostInTech3D]

Thank you!

[@TexZeTech]

Yes yes, yes & yes!!! I would also recommend getting a dedicated testing platform setup with the BIQU Hermit Crab for different hotends to remove unknown variables. Keep up the great work and looking forward to part2.

[@agrariancraftsleather]

It would be neat to see the ruby and diamond tipped (Diamondback) nozzles that are made for the printers

[@TechieSewing]

I'm sure with enough new patrons that would be possible ;)

[@dmax9324]

I really enjoy that you are taking a real "look" at all of these nozzles. I am thoroughly confused however after watching. I think i need a simple comparison with a shortened description of each nozzle in a simple format. Like here is the worst looking one, dont buy that, then this one is ok, then this one is better, then voila here are the best looking ones buy those.

[@Vez3D]

Awesome man! As a photographer myself i really loved this video. Macro with focus stacking is fun. :) thanks for the great shots

[@LostInTech3D]

thanks, really appreciate it! :)

[@KaminKevCrew]

This is a really great video, and I appreciate the work you’re putting into this project immensely. One comment I’d like to make though, is that more flow doesn’t actually require a longer nozzle. This is a small thing, but early on in this video you did mention that more flow means a longer nozzle, and this isn’t true. The only thing you need for more flow is a longer melt zone, and the melt zone doesn’t have to be entirely in the nozzle. The reason this became the popular method (I believe) is because the E3d V6 design requires the nozzle to butt against the heatbreak in order to seal the hotend and prevent filament leaks. However, there are two main designs that I know of (because I own one example of each) that disprove the whole “more flow requires a longer nozzle” thing. Those are the Mellow/Vez3d Goliath, and the Phaetus Rapido 2 UHF. Both of these hotends are compatible with bog standard V6 style nozzles. The Goliath is one of the highest flowing hotends available because it has a ridiculously long melt zone, despite the fact that it uses a standard length nozzle. The Phaetus Rapido 2 UHF is perhaps more interesting to my point though, in that the Rapido 2 UHF comes with the ability to run in “normal” Rapido mode (that is, the same as the standard Rapido) as well as in UHF configuration. The only thing that changes is an extension gets screwed onto the melt zone, which extends the melt zone, then the normal V6 nozzle gets screwed into the extension - and presto! We have more flow. To my understanding, this is a change from the Rapido 1 which used what was essentially a fancy nut to extend the melt zone, and required a Volcano nozzle to run in UHF mode. Oh, and there’s the Mosquito Magnum and Magnum + from Slice Engineering, which run with the same idea of using a longer melt zone. Again, this isn’t of particular importance to what you’re working on. It’s just something that I think is worth mentioning, because needing a longer nozzle really is an issue specific to the V6 design from E3d, and all of the other hotends that copied the concept. It’s not actually something we ever had to have.

[@1fareast14]

re: surface finish Construct 3d showed off a 6 input hotend for higher flow. It was made with sls. To smooth the insides, glow filament is run through it for polishing purposes

[@LostInTech3D]

Oh....now I need to test that

[@BHBalast]

​@@LostInTech3DAlso I wonder if chemical finishing could be sensible to do.

[@martinrayner6466]

*Beautiful camera work.* Thank you. I have a Elegoo Nepture 4 plus, and love it. But getting replacement nozzles... There always out of stock!

[@LostInTech3D]

I heard they're getting them back in stock soon but yeah the downside of only elegoo making them.

[@j0rp]

You craft light beautifully.

[@everettcass7904]

I love the fact that you’re mixing your passions, clearly you enjoy it. I enjoyed seeing that and would love videos like this in the future

[@m_IDEX]

Wild images! Thank you for doing this.

[@RixTrix]

This is such a great video from such a fantastic channel. I got into printing a few months back and all other channels I've wanted to learn about the hobby have sort of faded away, as yours is far away my favorite. I appreciate how much work went into this vid, looking forward to the next one.

[@jhollandb]

Thanks for the video. I can see how difficult it is to do the material justice. Looking forward to your next episode.

[@GeekDetour]

How on earth would anyone be enjoying this weird montage?!... I loved it.

[@jeffgros8508]

Yes. Very enjoyable. Your content is well produced. And I typically chuckle at least a few times each episode. Your sense of humor is very aligned with mine. Keep it up.

[@BradClarke]

Excellent images. Really like the idea behind the video too. As for the various nozzle types; I got rid of my sovolcano nozzles and switched my SV06 Plus hotend over to also use MK8 nozzles. I have tons of MK8 nozzles (brass, plated copper, hardened) from my other printers.

[@802Garage]

Buddy... 10:54 was a wow moment. Great video. Definitely some of your best work. Even if it was just an excuse to play photographer with 3D printer parts. ;) 12:27 was also pretty amazing. I mean it's basically very small part 3D scanning, albeit probably not extremely accurate dimensionally. That is just super cool. Perhaps cross sectioning some nozzles would allow for more INsights? Definitely not upset this is split into multiple videos, but I will be impatiently waiting. My guess is general quality of nozzles, inside and out, hardly affects printing unless there is a major defect. Nozzle design and material matters more than quality. The quality may have more impact on clogging and melted filament sticking though. I think many nozzles are too expensive for sure and the marketing is strong.

[@Kosaro1234]

This video is a work of art! I'm looking forward to the sequel.

[@LostInTech3D]

Thank you! I think the sequel might be a bit more back to business with some actual data, haha.. but definitely will do this sort of thing again

[@Kawalzki]

This was amazing!!!! Thank you for the amazing quality and hard work!!! I apreciate the insite into the quality if nozzle out there. I would love to see a side by side of how this quality effects flowrate between various nozzles of the same spec and design.

[@CodyWilliams-s8o]

I’ve seen some of your other videos but this one got me. Keep exploring and sharing.

[@silmaz40]

I just watched one of the most artistic and, at the same time, technically explanatory videos I have ever seen on KZbin in my life. I realized that a nozzle is never just a nozzle. what the artist means here "If you can't find flaws with something, you're not looking closely enough".

[@ladyliss5516]

very well said :3

[@megalomorphox]

We need more like this men. Keep it up!

[@CoryC54]

We used to use an "Optical Comparator" in inspections for thru-holes. It's the specific machine for this! Though cameras work too.

[@B1GJano]

this is mine blowing and amazing! Love the intricate details you put in to make this topic the most fascinating I have ever heard it discussed. Well done!

[@reprinted3D]

This is really fascinating stuff. Thank you for doing this!

[@danob9869]

youve just done something others havent and wouldnt even dare thinking of doing it. GREAT JOB. Super interesting. This is one of those vids you want to be able to hit the like button multiple times...

[@gordslater]

One or two M6 nuts (or mayby one full nut plus a half/locknut) can usually convert a Volcano nozzle to a short-nozzle hotend, in case you've never tried - may save you some time and dosh Awesome vid BTW, a hell of a lot of work gone into those shots

[@tailzer42]

fantastic. Thank you and looking forward to the testing video

[@jeffharrison5265]

That was fantastic!! Thanks for making this one. Looking forward more.

[@unserfa]

I like the shots and the editing! Well done mate!

[@VR_Von_Bruegge]

This is so hillarious. I mean, the phrase "Lost In Tech", is defintion to this video. Wonderful. Thanks for this experience.

[@LostInTech3D]

haha, past me knew future me's destiny apparently

[@glowpon3]

I would love to see this type of photography done on a diamondback nozzle. Their construction is already an insane process, and I wonder what it really looks like through the nozzles.

[@EngineerJerry]

Really cool video. Can't wait to see the continuation/completion.

[@LifeSOSlive]

This is awesome. Definitely looking forward to the next videos in this series!

[@jarrenvanman-essentium7449]

Amazing work! Really looking forward to the next video

[@Lozoot2]

8:44 I was bracing for a quick little "Hey! Vsauce, Michael here!"

[@ivovass195]

Very interesting indeed, definitely looking forward to seeing the print comparisons. Super cinematography for this one, much appreciated the dedication

[@MegaVoltMeister]

Thanks for the deep dive into this subject. This could be a masters thesis. So many variables to contend with makes the rabbit hole very deep.

[@keithhudson1248]

You are to be congratulated on the great photography and video sequence which did show how different the quality of manufacture, I can not imagine how you are going to better this video.

[@davidruggiero6284]

You are the Sir Attenborough of nozzles. Wonderful integration of subject content and sponsor content.

[@Dalroth]

What cool and fantastically made video! I cannot wait for the follow up. Well done! Well done!

[@aldabest]

I enjoyed this style of video, it’s very different from your typical content but your expert knowledge really shows through here. And thanks for not rushing through your video, I think the topic of nozzles is fascinating and I’d love to see you do it justice.

[@LoosiuFlying]

This is waaayyyy to good to much effort for open content. Amazing work. The explanation about stcking with montage and music was almost like a travel through Arrakis...

[@drdoomslab]

sweet. i really enjoyed this. some of the shots and stacks you made looked amazing. I'm really looking forward to more. Cheers

[@BlancheNeigeLD]

Excellent. Such a great video! You make it all looks so beautiful, with the music and all...loved it!❤

[@MCPicoli]

I cannot avoid comparing your videos to Posy's. Both with superb photography, both showing views from things normally hidden from the naked eye in interesting ways!

[@LostInTech3D]

I'm happy to hear that, his channel is frankly amazing.

[@flightmaster999]

I can't wait for your next video. This stuff is so interesting!

[@hellothere6627]

Your one of my favorite 3D printing info channels. The videos are top tier quality with good original information. I don’t mind the wait between videos because it means when one does come out it’s going to be good. I’m excited for the followup videos, thank you for all the effort your putting into this

[@froquede]

felt like I was watching a posy video about nozzles, great content as always!

[@LostInTech3D]

I'm impressed at how many people have noticed the heavy nods to posy's style... 👍

[@cygnusstarscream]

Thank you kindly sir. I've wondered about quality since buying my first Qidi X Max printer 3 years ago. Now I have seven, mostly Ender series. Thanks again. 😁

[@kilianlindlbauer8277]

Amazing pictures. You know what a truly beautiful nozzle is? A phaetus tungsten carbide. The perfect finish, the shimmer or the dlc coating, non existing roughness on the inside and outside. Nearly to beautiful to put in a printer. A e3d obxidian is also just a good looking

[@TrJanny]

I'm not in a condition to be a patreon or anything (at least for now), but I can express my sincere thanks for this awesome video. I'm blown away by the tech that created those stacked 3D images, and more importantly how amazing it gets in skilled hands. One of the most impressive 3D printing videos I have seen so far.

[@becauseican2607]

Wow! I'm only halfway through but already liked it. That's an achievement not many videos have gotten.

[@dtibor5903]

When I use a new E3D volcano nozzle, i always round the nozzle's edge on a hard surface. I do it because the sharp edge has a bad habit of accumulating material while printing. A rounded nozzle just prints better. I usually print functional parts so always tune the print to be on the edge of overextruding.

[@aspectcontext]

Man, this is your best work by a country mile, which was already at a high baseline level. Fascinating deep dive.

[@FranklyPeetoons]

This video actually forced me to override Spontzer Blok so I could see what you were talking about regarding PCBWAY. Mission accomplished! Well-did.

[@LostInTech3D]

🤣

[@aronseptianto8142]

awesome photos, there's always something special at looking macro shots at such a high resolution

[@JBMetalShop]

Finally one of my favorite 3D printing KZbinrs is looking into a question i have had for a long time, thank you!! I can’t wait, i love the quality of your videos and explanations!

[@dtaggartofRTD]

Some seriously impressive bits of photography here. This is really cool.

[@ZeeengMicro]

From personal experience, the cheap nozzles got clogged up more often but can be easily dealt with using a filament dust filter. One thing though, I really hate how Bambu Lab designs their nozzle. I bet they intentionally designed it that way to make it harder to copy and artificially jack up the price hence more profit. They literally required you to buy an extra heat sink for every nozzle you buy from, simply an e-waste. Some Chinese manufacturers already made a modified Bambu Lab nozzle where you can swap out "only the nozzle" and use a normal nozzle (E3D, CHT, cheap ones, etc).

[@dakotapahel-short3192]

Please explore this. I went down a rabbit hole of polishing cheap nozzles with diamon polish up to like 50k grit or something stupid. It doesn't take too long to make a cheap nozzle polished. But I didn't really see much of a difference in print quality. The things I've noticed effect print quality are: distance thermistor is from the nozzle tip( closer is better), stable temperatures, filament consistency, extruder build quality & resolution, and for crazy motor drivers: electrical noise. In that order. Stable Temps really seem the most important. Keep the temp at the tip of the nozzle & ambient air from fluctuating too much and quality is great.

[@madderall_dot_com]

I never knew there was so much beauty inside of a 3d printing nozzle! Though this definitely had more to do with your camera work than with the nozzle itself. Bravo! Speaking of camera work, any particular reason why for your static shots you decided to go with image stacking vs using the minimum aperture and possibly printing some extension tubes? I know that lighting becomes an issue, but the slow shutter speed can usually take care of that. Btw, I seriously think that your channel is one of the most underrated channels on youtube and quite possibly THE most underrated channel in the 3d printing space. I have no doubt that this will change in due time.

[@billlemens9982]

Artsy and informative! ❤ Thank you!

[@Ash_Prints]

Thorough, concise. This is the exact kind of videos I wanna see in the 3D printing space. I too have noticed the change in all the extra nozzles. I really hope one really sticks and become the new standard to later bring down cost and availability.

[@davethetaswegian]

Fascinating, definitely like to see more, thanks.

[@mtyler2469]

Yes Please! Ive wondered the same thing about nozzles. I've even polished the inside of cheap brass nozzles and it seemed like it worked better after I put it back on polished.

[@awkwardsaxon9418]

CNC machining is a bit like slicing 3Dprints. Bigger manufacturers will have their "settings" honed in (literally) much better because there are more iterations where slight corrections go a long way. Plus they will have more capable machines that are themselves produced to a higher standard (and specialized tools probably). Incredible footage

[@awkwardsaxon9418]

(it's reamed not honed I know)

[@johnrandecker8063]

This is really cool stuff. The pictures are spectacular. I'm especially interested in your comparison of how the cheap vs expensive nozzles (or at least well vs poorly made ones), though. I went the proprietary nozzle route 7 years ago with a Micro Swiss all-metal MK10 kit. Those nozzles are $15 each these days (and they weren't much less when I did the upgrade.) On the other hand, the .4mm nozzle that came with the kit is still going strong so I guess the quality shows through in that regard. (I also have a couple of hopelessly clogged .2mm nozzles but that's not the manufacturer's fault.) Anyway, I'm looking forward to more in this series. Keep up the great work!

[@substratum3d]

Awesome stuff. I've always loved macro shots. Also, your custom LED PCB has my interest (Custom flashlights are another hobby of mine). Do you know what emitters you plan to use? And what type of driver? I'd imagine Nichia E17a would be just about ideal due to their small size (1.7mm) and very high CRI. Also, you may already know this, but I highly recommend using an MCPCB instead of your traditional FR4 PCB. The metal core helps a lot to move heat away from the LED chip much better. Looking forward to seeing what you're working on next. Cheers

[@Palooka37]

This was legit worth the effort, and i say that as someone who hates doing focus stacking with a passion. Kudos!

[@LostInTech3D]

Thanks 👍

[@benkressdesign]

Excellent video... I appreciate you making this as it is something I have been wondering myself for a couple of years now. Kudos for all of the photographic work and the research hours put into this. Very much looking forward to the next one.

[@wernc.]

This was *incredible*. Haven’t enjoyed a 3pd video this much in a long while. Bravo!

[@no-expert]

I think the video perfectly matches your channel name in a good way. I really like the depth and detail and understand that it needs time in the video to develop. Rushing it wouldn’t feel right here, the pace is perfect and leaves room to take a look at the nozzle in a way I never could before. Awesome!

[@chrissavage5966]

Some amazing photography there and a fascinating dig into the topic….but the real result will be the, well, results. What actual differences in print quality and reliability do the various offerings give. Can’t wait for that one. Thank you!

[@arsenabakan1154]

Commenting to support. As a macro photographer myself, I could not leave a comment to appreciate the amount of work and time invested in this video! Please keep doing this so community get more educated, get more in-depth answers about FDM

[@jessehavok4181]

There are cameras with focus stacking built in? This is a really cool video. The most beautiful side of 3D printing I have ever seen.

[@LostInTech3D]

Yes 👍 I linked one such in the description

[@GreenAppelPie]

I’ve tried a variety for the Ender 3, cheap nozzle work fine, baht they show wear very quickly but are very susceptible to clogging up. What I did end up settling on was the POLISI3D nickel plated copper ones. They simply don’t clog and changing print materials isn’t an issue, though I always run 50mm of cleaner filament when changing. Those custom nozzles being overpriced and/r not available is something I expected. They seem they’d be a bad choice in a print farm setting

[@johnm7723]

The sheer amount of effort in this video and the kit used is a signature of this channel. Above and beyond is all I can say. Congratulations

[@BennyTygohome]

This cinematography of nozzles is like a Stanley Kubrick movie 👍🤙😊

[@SweHam]

My interest in this channel is definitely the 3D-printing part of it, however I gladly watched this just based on how gorgeous some photos were 😊

[@Final_Layer_3D]

Excellent video! The work put in to this definitely comes thru to the end product. As always.

[@oliverkalitowski1032]

Thx for all your work

[@LostInTech3D]

Thank you, hope you enjoyed this one! 👍

[@oliverkalitowski1032]

@@LostInTech3D i did. Like so many other of your videos. Because of the details, the real life questions behind tests and your calm manner.

[@Etrehumain123]

Ahhh I was doing macro with reversed 50mm lenses when I was teenager, I made incredblie shoots of eyes !

[@avoirdupois1]

The images inside the bore were amazing.

[@NotWorkingAtAll]

This was the most cinematic 3D printing video I've seen. Very amazing and informative work!

[@Tarbard]

Amazing video sir. When it went 3D that was a "wow" moment.

[@draeath]

Woo! Focus stacking! I know of it, but haven't really used it. I've only done exposure stacking, personally. Basically the same thing, but you're working with shutter speeds instead.

[@LostInTech3D]

yeah for night shots, I've dabbled, never got good results though

[@dannyberne]

I know I'm late to the party, but... have you considered taking some pictures from the other end? I just hold them up (really close) to my eye to see if anything is in there. The nozzle opening acts as a pinhole lens, and you can see EVERYTHING in the barrel

[@LostInTech3D]

I'll experiment with that! Optics are weird but I'll see what happens

[@TheElectronicDilettante]

For your lighting project consider using a small piece of acrylic or glass sheet in a shape similar to the capital letter “Q”. Afix an smd LED to the stub of the glass ring. Blackout edges and back face of the ring and presto! You have a diffusing light ring for the near microscopic subjects. For other, better ideas in the field of microscopic illumination, look into the bits and pieces of fiber optics. There are so many parts that could be repurposed, I just think no one thinks of it because why would anyone be taking apart fiber optic components. Thanks for the excellent video. Theres some great photography accentuating the information you deliver. It’s greatly appreciated.

[@keithws79]

Seriously underrated channel! Wonderful cinematography, good music, and nice voice over!

[@TheBrowncoat1]

Great stuff, very interesting keep it up! Subscribed!

[@PatriotPaulUSA]

Incredible photography/videography! I stepped away from 3 D printing a few years back after spending more time replacing hotends, making my own magnetic beds, enclosures, etc I realized I was spending 80% of my time working in printers and was tired of it. Now i just got back into it and ordered a new K2+ Creality to give it one last shot. I was amazed at the way nozzles have changed and the price. Now I can see what is inside of some of these. I am curious about the new K2 nozzles especially. What a huge increase in price. We shall see.

[@LostInTech3D]

The k2+ is an amazing printer, I have one in for review so watch out for that