No video

Explorer ST H&R lowering Spring Install

  Рет қаралды 7,109

Houston Speed Freaks

Houston Speed Freaks

Күн бұрын

I hope this video is more helpful than my last spring video as I’ve learned a few tips and tricks since doing 9 sets of lowering springs hopefully soon will be number 10 for me 😅 I appreciate everyone who supports me and watches my videos y’all are all amazing people thank you for supporting me 🙏 I really hope this video helps ours ma gives a more in-depth how to of the rear springs. As always if I can help source parts for you give my website a look over
HoustonSpeedFreaks.com
If you need install help and are in the Houston area send me an email to set up an appointment!
HoustonSpeedFreaks@gmail.com

Пікірлер: 84
@michaelsmith6642
@michaelsmith6642 9 ай бұрын
That's got to be the best install video yet. I'm going to be installing mine in a few weeks and you just made my task sooo much easier. Thanks brother!!
@HoustonSpeedFreaks
@HoustonSpeedFreaks 9 ай бұрын
Love reading comments like this! The whole reason I make these videos is to help others install their parts so they can save more money for car parts 😅😁
@Caboboy007
@Caboboy007 4 ай бұрын
The easiest 4 spring install I’ve done. Thanks brother for a very informative video the took me only 3 hours and saved me $500 plus. You the MAN…. Thanks 🙏
@HoustonSpeedFreaks
@HoustonSpeedFreaks 4 ай бұрын
Super happy my video was helpful and saved you money! More money for more mods 😂
@ja-makin-me-fit7335
@ja-makin-me-fit7335 4 ай бұрын
​@HoustonSpeedFreaks hey bud have you had any issues with the alignment to spec? I saw on some forums that some ppl can't get the camber in spec.
@Caboboy007
@Caboboy007 4 ай бұрын
@@ja-makin-me-fit7335 front and alignment this weekend. I’ll give you an update afterwards.
@Caboboy007
@Caboboy007 3 ай бұрын
@@ja-makin-me-fit7335 Had the alignment done last weekend. Had NO issues. The front was done with ease. Because I moved the subframe when doing the rear spring, it required a little more adjustment. All in all it was s done in 1 hour with NO issues with the camber. Maybe the people that had issues didn’t install correctly.
@ja-makin-me-fit7335
@ja-makin-me-fit7335 3 ай бұрын
@Caboboy007 thanks brotha. I had mind done last weekend as well and the got it done all in the green but it was a $320 alignment. I'm running the Eibach lowering springs. Thanks again for the update.
@NOGSUPREMACY
@NOGSUPREMACY 9 ай бұрын
I’m ordering my tools that I don’t have for this install! Wish me luck and if I can’t handle it I’m scheduling that 10th install! You are a blessing to the ST community heart❤
@HoustonSpeedFreaks
@HoustonSpeedFreaks 9 ай бұрын
You got this! 💪 and thank you! I love reading comments like this, really makes my day ❤️
@NOGSUPREMACY
@NOGSUPREMACY 6 ай бұрын
I almost gave up on life with the rear. I forgot to take off the shocks….. Took me a hour to figure it out after prying the spring out then my buddy said take off the shock! I did a test drive but I might have a spring popping feeling in the driver front. Thanks again for the videos! 🫡
@WhizzyWhig
@WhizzyWhig 9 ай бұрын
🤯🤯🤯 Do you know how much time you just saved us with this??? Dude - you’re the MAN!
@HoustonSpeedFreaks
@HoustonSpeedFreaks 9 ай бұрын
So glad I could help out 😁 crazy the book calls for 7/8 hours and you can do them in 2/3 hours lol
@WhizzyWhig
@WhizzyWhig 9 ай бұрын
@@HoustonSpeedFreaks - the real question is… do I tell Michael about this video, or nah? LOL
@HoustonSpeedFreaks
@HoustonSpeedFreaks 9 ай бұрын
@WhizzyWhig oh he knows how long it takes lmao, shops will still charge book price unfortunately. And he has no say in what the shop charges😅
@WhizzyWhig
@WhizzyWhig 9 ай бұрын
@@HoustonSpeedFreaks - I don’t mind paying for experience and a passion for the platform, fortunately 😉
@HoustonSpeedFreaks
@HoustonSpeedFreaks 9 ай бұрын
I only charge $400 to install springs 😁 no overhead I work out of my driveway lol. But you will need an alignment after 😅
@stevenreeder
@stevenreeder 6 ай бұрын
Very good info on how to do the rear springs. Saved a lot of headache!!!
@HoustonSpeedFreaks
@HoustonSpeedFreaks 6 ай бұрын
Thank you man that’s what I am to do 😁❤️
@thgilne5060
@thgilne5060 3 ай бұрын
Ive been watching you since you started the explorer. I went with the Platinum with the 3.0l because it was 8k cheeper. Plus it will end up being more of a little sleeper. 😉 I went with lethal performance lowering springs. I haven't lowed a vehicle since my 20s 😅. I've raised a few trucks. Lowering the Explorer just feels right not just for racing but I'm now in my mid 50s and have no desire to clean up a truck after a day of mudding. 😰 I absolutely hate any roll in any vehicle. Well I lied I did lower my 2018 Chrysler 300 so there would be no roll and it was point and it would turn on a dime bro. But now it is 800hp with a th400 track only car. Well it is being upgraded for next season. Long comment to tell you thank you for this one. I could have used that trick for the reara on my 300. Good lawd what a pain. Next year all of my vehicles will be in the 500+ horsepower. 2015 BMW 550i 535hp, 2018 Chrysler 300 800hp, 2020 Explorer Platinum 500 very soon. Until I get all of the mods installed I'm running the JB4 on a E30 tune. Wow these things can make some power. I can't wait to take it to the track. Filming is a pain so big time props. ❤❤❤
@HoustonSpeedFreaks
@HoustonSpeedFreaks Ай бұрын
Thank you brother I truly appreciate the love and support and can’t wait to see where you take your explorer 😁💪 an 800hp 300 sounds rowdy lol
@Engineer_GM_Ford_Chrysler
@Engineer_GM_Ford_Chrysler 3 ай бұрын
What torque specs are all the bolts? I decided to give it a shot myself next weekend. Love your videos man!
@HoustonSpeedFreaks
@HoustonSpeedFreaks 3 ай бұрын
Thank you brother! For the subframe I’m not sure can’t even get the specs from ford I just give them some Ugga duggas and haven’t had any issues yet 😁
@mikegrad8224
@mikegrad8224 2 ай бұрын
love your videos! you helped me with front and rear sway bar installs. ad now i'm taking the next steps. H&R springs are on their way! even the oil change video was super helpful as i now its a simple task, but its good to see for someone who isn't a mechanic by trade.. I am ready to tackle the lowering springs, and i'm doing PIU shocks and struts at the same time. my question is why is it so difficult to get the rear springs out? wouldn't it be easier to use the spring compressors to pop them out? taking all whose sub frame bolts out makes me nervous.. :)
@HoustonSpeedFreaks
@HoustonSpeedFreaks 2 ай бұрын
Most spring compressors wouldn’t fit in there to compress them and get them out. Dropping the subframe is hands down the easiest thing to do. In fact it’s so quick I have narrowed doing springs on these cars down to an hour front and back 😁 and thank you for watching my videos I’m so glad they are helpful 🙏
@KenKyleRacing
@KenKyleRacing 9 ай бұрын
Finally!!
@HoustonSpeedFreaks
@HoustonSpeedFreaks 9 ай бұрын
You finally going to put yours on?
@KenKyleRacing
@KenKyleRacing 9 ай бұрын
@@HoustonSpeedFreaks maybe in the spring when it warms up. they look great on the floor of the spare bedroom
@HoustonSpeedFreaks
@HoustonSpeedFreaks 9 ай бұрын
@KenKyleRacing guess I’ll have to come out and install them for you 🤣
@Engineer_GM_Ford_Chrysler
@Engineer_GM_Ford_Chrysler 7 ай бұрын
I saw in one of your vids talking about doing install service yo help us ST folks out. What do you charge yo install, springs, intercooler, downpipes and exhaust? What is your price to do each one? I would like to have someone EXPIERENCED in the Explorer ST. Not all shops are experienced in the ST Explorer but charge an arm and a leg and would most likely cost me an extra hour or two or three because of the lack of experience and need the extra time to "figure it out"...So you seem to know what the hell your doing and have done it dozens of times. I would trust you over any of those shops. Anyways, 1st thing is intercooler, and replace the plumbing hot and cold side and a good intake, maybe the fenfab intake kit with bov and all the plumbing to free up flow to and from intercooler. I'm old skool carburetor guy growing up in the 80's and this my 1st modern tuner. My wife says it's my midlife crisis lol..anyways, your charge to start with intercooler install charge cost and all the plumbing to and from intercooler, turbos. I'm thinking of using the fenfab high flow intake kit with BOV. I want allthe plumbing from intake filter to the exhaust tips replaced. 3" tubing all the way through with a big intercooler. Cost and time to do it all??
@HoustonSpeedFreaks
@HoustonSpeedFreaks 7 ай бұрын
Hey man hope you’re doing well, shoot me an email at HoustonSpeedFreaks@gmail.com Or give me a call my contact info is on my website houstonspeedfreaks.com I’d be more than happy to get you a quote on installs 😁
@Olliesadventures16
@Olliesadventures16 4 ай бұрын
Got any links for the sockets/ pass through wrench’s needed?
@charleshenson4183
@charleshenson4183 2 ай бұрын
You can get them at most auto parts stores,just call and ask if they have them in stock. That's what I did.
@HoustonSpeedFreaks
@HoustonSpeedFreaks 2 ай бұрын
I picked them up from either autozone or harbor freight😁
@charleshenson4183
@charleshenson4183 2 ай бұрын
@@HoustonSpeedFreaks Probably advance auto parts as they carry it. I called them all including harbour freight. I got mine from advance auto parts. But I'm sure others also carry them but just didn't have them in stock the day I got mine,so could of been autozone.
@ja-makin-me-fit7335
@ja-makin-me-fit7335 4 ай бұрын
Hey bud, Im getting the Eibach springs installed soon. But i am reading on different forms dated back to 2020 about shops not being able to align after springs installed. Have you had this issue? And if so what did you do to bring it back into spec.
@HoustonSpeedFreaks
@HoustonSpeedFreaks 17 күн бұрын
I have not had any issues with shops putting them back into spec, but I have heard of some people having issues…. as long as you have a good tech that knows what he’s doing. You shouldn’t have any issues.
@HC-xs6ek
@HC-xs6ek 2 ай бұрын
Would have been cool if you showed a side-by-side, so you can see the difference in height. Still awesome vid
@HoustonSpeedFreaks
@HoustonSpeedFreaks Ай бұрын
Thanks man! I have pictures on my instagram of side by side 😁
@statichawk360
@statichawk360 3 ай бұрын
If I am replacing the struts as well as the springs and the sway bar at the same time, maybe I should just use the "normal" way right? Just un-bolt the lower control arm from the knuckle replace spring, bolt, sway bar, re-install?
@Jciatt1997
@Jciatt1997 Ай бұрын
I’m replacing shocks as well. Did you end up doing it like you said?
@HoustonSpeedFreaks
@HoustonSpeedFreaks Ай бұрын
Just do it this way just one extra step of unbolting the shock.
@Jciatt1997
@Jciatt1997 Ай бұрын
@@HoustonSpeedFreaks is the pass through wrench 3/8 size or smaller? I know you gotta use the 1/4 inch drive 10mm
@stevenreeder
@stevenreeder 6 ай бұрын
Did they have any issue getting the camber right while doing the alignment after the spring install?
@HoustonSpeedFreaks
@HoustonSpeedFreaks 6 ай бұрын
No sir not with any of the brands of lowering springs I’ve installed on any st have they had issues getting the rear camber right.
@stevenreeder
@stevenreeder 6 ай бұрын
I haven’t taken it for alignment yet. Seen several people in forums saying camber is an issue after lowering springs are installed. I installed the H&R springs
@IDMacd529
@IDMacd529 9 ай бұрын
Hear me out for a second: what if you turned the wheels, applied the spring compressors to the spring, went up top and removed the strut nut, THEN lifted the car, removed the wheel, and then removing the strut? In my mind, it prevents you from having to fight it, or put it in a vice, and the spring is already compressed from being on the ground. Thoughts?
@HoustonSpeedFreaks
@HoustonSpeedFreaks 9 ай бұрын
It could work but it’s not bad the way I do it and way quicker than trying to fish up in there to put the spring compressors with the wheel being turned lol
@DF-eg1ix
@DF-eg1ix 3 ай бұрын
Im in NYS du you do installation?
@HoustonSpeedFreaks
@HoustonSpeedFreaks 3 ай бұрын
Yes sir I do installations but I’m located in Houston Tx 😁
@ibadahmed1409
@ibadahmed1409 7 ай бұрын
Installed eibach springs. Think I have a click clack when I brake coming from front. Everything is tight doubled checked. Anything I might have missed.
@HoustonSpeedFreaks
@HoustonSpeedFreaks 7 ай бұрын
Sounds like a top hat in my opinion I’d make sure they are tight.
@NOGSUPREMACY
@NOGSUPREMACY 6 ай бұрын
Did you figure out if it was the top rubber piece?
@ibadahmed1409
@ibadahmed1409 6 ай бұрын
Yea I believe it was that top hat bolt
@donj0216
@donj0216 9 ай бұрын
Do you recall what size that passthrough socket was? Metric I presume.
@HoustonSpeedFreaks
@HoustonSpeedFreaks 9 ай бұрын
Yes I mentioned in the video it’s a 13/16th and 10mm on the middle to hold it 😁
@Pinozcyclezandridez
@Pinozcyclezandridez 8 ай бұрын
The factory ones were leaning also…re watch your vid..
@HoustonSpeedFreaks
@HoustonSpeedFreaks 17 күн бұрын
I’m telling you, you can put them on that way but you’ll be pulling them back off 😅
@byronaberle6294
@byronaberle6294 9 ай бұрын
Why not just use spring compressors on the rear springs? It would save all the hastle of dealing with all the rear subframe bolts and splash shields and exhaust. Not trying to be negative, just curious.
@HoustonSpeedFreaks
@HoustonSpeedFreaks 9 ай бұрын
Trust me I’ve tried, but you’ll hit the frame and or the lower control arm that holds the spring will be in the way.
@Engineer_GM_Ford_Chrysler
@Engineer_GM_Ford_Chrysler 7 ай бұрын
It's called "lots of experience and wisdom". I've watch a ton of his videos and he has tried and experimented with different ways. He's a mad scientist Dr Frankenstein of Explorer ST! Trust his way, he knows better than most speed shops. Speed shops work on everything daily and by the time they get to work on another Explorer ST , they have already forgot half of what they hand to figure out. This guy does it DAILY to the SAME car and just gets better and better at it. Its what we call experience and wisdom. He is VERY GOOD at what he does. Trust him.
@caboboy8058
@caboboy8058 4 ай бұрын
Hey buddy I’m installing H&R springs & was putting the tools together. Question: Are you using a 3/8 drive pass-thru with a 13/16 socket when removing the shocks spring hat nut? I have that setup, BUT the 10mm socket I have won’t fit thru the pass-thru. Is there a 10mm thin wall that I need to buy or am I missing something. Thanks 🙏 in advance.
@HoustonSpeedFreaks
@HoustonSpeedFreaks 4 ай бұрын
Hey man, yeah I use a long reach 10mm or if you go down to a 1/4 10mm it should be skinny enough to fit and then you can use and adapter to a 3/8 wrench to get better leverage
@TheManuich1
@TheManuich1 3 ай бұрын
Should I remove my Steeda Rear Diff brace as well?
@HoustonSpeedFreaks
@HoustonSpeedFreaks 3 ай бұрын
No sir no need to remove your diff brace as your lowering the whole subframe and diff brace just holds the diff in the subframe
@charleshenson4183
@charleshenson4183 2 ай бұрын
​@@HoustonSpeedFreaks Just remove the portion that's bolted to the frame,that's in the way.
@HoustonSpeedFreaks
@HoustonSpeedFreaks 2 ай бұрын
Don’t even need to do that honestly the whole subframe holds the diff in place. So removing it or keeping the diff brace on wouldn’t make a difference
@charleshenson4183
@charleshenson4183 2 ай бұрын
@@HoustonSpeedFreaks Well it's bolted to the area you placed the jack so that it would be centered in order to raise the whole rear end.
@charleshenson4183
@charleshenson4183 2 ай бұрын
@@HoustonSpeedFreaks Well it bolts to the area where you placed the jack.
@Its_Shrimpy
@Its_Shrimpy 7 ай бұрын
If I drive down there, would you install mine?? 🤔 😅
@HoustonSpeedFreaks
@HoustonSpeedFreaks 7 ай бұрын
Absolutely I’m down 💪😁
@SouthdownGarage
@SouthdownGarage 7 ай бұрын
Oh boy, this is an easy how to video lol
@HoustonSpeedFreaks
@HoustonSpeedFreaks 7 ай бұрын
Hopefully easy enough for you to use 😘
@SouthdownGarage
@SouthdownGarage 7 ай бұрын
@@HoustonSpeedFreaks 💯. I used this yesterday...will definately give a shout out to you for this in the video.
@HoustonSpeedFreaks
@HoustonSpeedFreaks 6 ай бұрын
@SouthdownGarage can’t wait to watch it man!
@rainbowsunshinekitty3953
@rainbowsunshinekitty3953 8 ай бұрын
Haven't made it to the end but Definitely upside down. IMO. You see the oem spring do exactly what the h&r did when upright. It leaned. I know nothing...
@HoustonSpeedFreaks
@HoustonSpeedFreaks 17 күн бұрын
😂😂😂
@Andry-ro7nq
@Andry-ro7nq 9 ай бұрын
Вы американцы, так долго говорите. Коротко то не показать , заменил 4 пружины. И у тебя на заднем редукторе 1 крепёжный болт. Смотри чтоб редуктор не вылетел.
@HoustonSpeedFreaks
@HoustonSpeedFreaks 9 ай бұрын
Hey friend I talk a lot as I try and give as much information as possible. And this is a customers car so all I can do is recommend he gets a differential brace 😁
A Drone-Free Cat-Back for the Explorer ST! | Thermal R&D
10:31
Explorer ST FenFab Billet Veritcal Arm Install
25:56
Houston Speed Freaks
Рет қаралды 4,7 М.
Blue Food VS Red Food Emoji Mukbang
00:33
MOOMOO STUDIO [무무 스튜디오]
Рет қаралды 5 МЛН
Survive 100 Days In Nuclear Bunker, Win $500,000
32:21
MrBeast
Рет қаралды 165 МЛН
500WHP Ford Explorer ST *DYNO RUN*
8:36
ACI Dynamix
Рет қаралды 1,8 М.
Supra H&R Lowering Spring Install (EASY)
9:34
Cameron Alford
Рет қаралды 13 М.
A 700HP Ford Explorer ST is the Ultimate Tuner Troll
9:57
ThatDudeinBlue
Рет қаралды 294 М.
Explorer ST HSF LED Kit install
15:10
Houston Speed Freaks
Рет қаралды 12 М.
Lowering springs vs coilovers!
0:48
Vivid Racing
Рет қаралды 105 М.
Explorer ST FenFab V2 Intake Install
25:01
Houston Speed Freaks
Рет қаралды 1,5 М.
10 DIY Upgrades | Ford Explorer
13:43
mugs132
Рет қаралды 345 М.
Blue Food VS Red Food Emoji Mukbang
00:33
MOOMOO STUDIO [무무 스튜디오]
Рет қаралды 5 МЛН