EXPLORING ST. ANTHONY’S BUTTE in MUTANT CAT XX

Testing out the new H.E.A.T. One Layer heated under garment while exploring the Sinder Butte next to the St. Anthony Dunes.
Available on our HillBro website at
hillbro.com/products/h-e-a-t-...
For more information on HEAT One Layer
heatinc.com

[@justinfee819]

Where you guys been always enjoyed your content 👍

[@HillBroPro]

Hello Justin. Thank you for your support and kind comment. Unfortunately life happens with some major changes and shift in priorities. We will be back soon, we love making videos. We are on the cusp of releasing our first original product which hopefully will also allow us to be consistent in making videos like we have always want to be able to do. Thanks Justin

[@stananthony8796]

That grey Wildcat xx looks nice. More of the build please!

[@coltrainm8450]

I needed this

[@outdoorzone]

Great looking XX’s I still love mine!!!

[@neutralmind6047]

Great video!! need more exploration of the dunes more videos

[@HillBroPro]

Thank you. We are doing our best to get out.

[@TheBandit7613]

@@HillBroPro What happened to your channel? You stopped making videos out of the blue. Is everything OK? Hope all is well.

[@drerogers3645]

You guys should do a long travel kit for the yxz also..

[@outdoorzone]

Have you all upgraded to the billet water pump impeller yet??? If not I would recommend it...especially how hard you run them in dunes!

[@HillBroPro]

Yes we have

[@outdoorzone]

@@HillBroPro was is it a very difficult install?? Any tips?? I just got my billet impeller a few weeks ago for my xx...still needs installed!

[@outdoorzone]

You all should do a video on how to upgrade the impeller.....as it’s a must have upgrade for long engine life!

[@HillBroPro]

Not hard as long as you have all the right clutch tools. Just pull the clutches. Then take the pump housing off. If the impeller does not slide right out turn the motor forward a little until it slides out. Don’t turn the motor backwards.

[@HillBroPro]

Not hard as long as you have all the right clutch tools. Just pull the clutches. Then take the pump housing off. If the impeller does not slide right out turn the motor forward a little until it slides out. Don’t turn the motor backwards.

[@coltrainm8450]

I just came back to watch this video again today because I was bored and I realized how much Caden gets bullied in these videos😂

[@HillBroPro]

He gets the brunt of it

[@tsmtylenol6473]

Any reason for there not being new video’s? Are you guys still going to be making the long travel kits for the wildcats?

[@HillBroPro]

Life happened to us for a while. We are now back to working on new videos. We won’t be offering complete long travel kits for the XX but we do have some bumpers and other accessories.

[@tsmtylenol6473]

@@HillBroPro glad to know you back looking forward to new vids 🤙

[@jeffbakker9129]

What head light are you running in the mutant cat?

[@HillBroPro]

We made our own custom lights. For the purpose of complimenting the text Ron logo back when we thought cat was going to continue with the textron brand

[@jakevawdrey9691]

We have “chutes” in Utah but we call them fingers..... super sketch if you don’t have the power or paddle setup

[@HillBroPro]

Right. What I meant to say in the video is is this is the only chute I have seen at st Anthony.

[@jakevawdrey9691]

I figured that’s what you meant. I have yet to hit St.Anthony’s yet but we are planning a trip this spring if I can play my cards right. Love the MUTANT XX and content keep it coming

[@jakevawdrey9691]

Have you guys been down here to hit little Sahara???? Hours of great riding

[@coltrainm8450]

@@jakevawdrey9691 I’m still too scared to climb the sand mountain there and I’ve even seen my bike climb up it I just won’t do it😂

[@HillBroPro]

No we have not been able to get down there yet

[@randytremaine1622]

uh, the fancy underwear is 1400.00 a pair ? Yikes !

[@HillBroPro]

That’s how I felt the first time I saw it, but after being around it, if your in the cold a lot then you can’t live without it. It’s one of those things that you almost have to see to understand where it’s so new not all our buddies have experience with it.

[@jgh4282]

On grey XX (dads) is that a custom exhaust manifold? Thats exactly where I want mine to mount. Can you still put bed back in? Nice.

[@HillBroPro]

We made it and yes you can put the bed back but because of the radiator we do have to cut the bed to make it fit.

[@AntiPattern328]

Whats up guys? Haven't seen much of HillBro and the XX for a while. What kind of info do you have on the extended arms, turbo setup, etc? At one time, it seemed you were thinking about offering some parts. Who out there is offering good stuff for the XX? Also... Whats up with the new clutch on the 2022??? Is it better?

[@HillBroPro]

Hello nic. We have had a lot going with our main business and in our personal lives. It has required us to take a break from HillBro for a while. We will be getting back into it when we are able, at this time it is unsure when. There are many good parts out there, depending on what you want, Push, Larue, Speedworks, fab775, TAPP all build good stuff that benefit the XX. The XX is a great machine, its my favorite, but I do hate the clutches and transaxles on them. I have zero experience with the new clutches on the 22s but I have been talking closely with cat about them. they will be better, how much better I am not sure until I get it on my machine and use them under boost for a while. Thanks for checking on us. We really miss making content. Thanks for the support!!

[@coltrainm8450]

I just got news that me and my family are going to st Anthony for the first time in June!!! Any spots we really need to ride?

[@HillBroPro]

That’s exciting. Many fun spots even beyond the dunes. Get back in touch when time gets closer.

[@michaelmoran7852]

Whos suspension is on it

[@HillBroPro]

We made it. You can see the build in the previous videos

[@jeffwendt8337]

Where’s the YXZ?

[@HillBroPro]

It sold last year.

[@jeffwendt8337]

@@HillBroPro Too bad. Awesome machine!

[@DUNEATV]

Damm, that sucks

[@tommylewellen9218]

Bought it running harder than ever. E85 tune is next

[@danielh2b]

what Bov are you guys running

[@HillBroPro]

We are running a Borgwarner turbo with has an internal BOV

[@danielh2b]

@@HillBroPro Thank you it sounds bad ass👍👍

[@danielh2b]

would love to get a similar sound bov for a stock turbo rzr