Explosion - Siemens NX 10 Training - Drafting & Assembly

[@MrEduardoFelipe]

Thank you Sir! You're an amazing professor! I spend about 3 hours trying to do it, passing through a lot of tutorials, and only with your video, I could do it! Thanks again

[@wolfgang.walden.cad.training]

Great & Thanks for your praise :)

[@renaud-charlesedger-sauve6726]

This guy is like the Bob Ross of Cad tutorial, his voice is so soothing.., Thank you for all the videos Mr. Walden, I've learned a lot about Catia, Nx and Creo because of them.

[@wolfgang.walden.cad.training]

LOL - really? I guess I have at least as many "happy accidents" like he had used to have. Thanks!

[@luisfernandoesquivelgonzal4485]

you are amazing, I learned the topic that my teacher couldn't in four months

[@wolfgang.walden.cad.training]

Thanks & great :)

[@ramadanramadan8885]

Das war echt super hilfreich. Herzlichen Dank Herr Wolfgang 💐

[@wolfgang.walden.cad.training]

Prima, gern geschehen.

[@borko4380]

Thanx Wolfgang!

[@wolfgang.walden.cad.training]

you´re welcome

[@mahdi8042]

Hello I could not create a disassembly map with the new version of NX. Help me please

[@wolfgang.walden.cad.training]

What is a disassembly map? An exploded view?

[@Dibarad9362]

Very nice

[@muctieudiuc]

Thanks, it very good

[@wolfgang.walden.cad.training]

You´re welcome

[@kavingovindasamy6051]

Very helpful, thanks mate!🤝

[@wolfgang.walden.cad.training]

🙂you´re welcome

[@jagadeeshpatil176]

Thank you sir...

[@wolfgang.walden.cad.training]

You´re welcome

[@romymathew2002]

I want to create another exploded view in a different orientation and without any screws or washers in that. When I tried it by hiding it, It removed all fasteners from the 1st exploded view as well. Basically, I am after one exploded view with all components on and one with few components on. I use NX10

[@wolfgang.walden.cad.training]

You want those 2 views in the assembly or in the drawing?

[@romymathew2002]

Both in the assembly and in the drawing

[@wolfgang.walden.cad.training]

Ok, you can use "arrangements", in one you "disassemble" (hide) the components. You have to use "sequences" for "disassembling" components. If you create a view in the drawing you can then select the wanted arrangement. There might be another way, but I would have to check that myself first. If I have some time to spare I will do a video.

[@romymathew2002]

That is a new lesson for me. Thank You, Found a way of hiding comments in the view. Menu--Assemblies--Context Control--Hide Components in View

[@wolfgang.walden.cad.training]

Great! Obviously this is rarely used, otherwise it would be easier to find.

[@patricioramosnegrete1192]

I used this video for my CAD final project. Thanks!

[@wolfgang.walden.cad.training]

Great, you´re welcome.

[@tysondrg6750]

Hi what laptop you use?

[@wolfgang.walden.cad.training]

Acer Black Nitro 17 - 16gb - Nvidia 1060 6gb

[@hediabdellah8791]

Hello please sir can you help me i have a problem with the drawing application. I installed a new variable to be able to use a tool for gears and since then when i go to Drawing (like you did in 0:54) i have a grey page with nothing on it. And when i go from Modeling to Drawing directly (by changing application) nothing happens. Thank you.

[@ch35t3rd3]

Thanks Wolfgang, that was very educational... But how do you make multiple exploded views of the same assembly?

[@wolfgang.walden.cad.training]

Just make more than one explosion and/or views. I.e. do 5 different explosion and define 5 views.

[@hallvardpaulsen]

Excellent. Very confusing that you have to make the explosion in the drawing file using modeling assembly functions. The logical thing would be to do it in Assembly and then import it to the drafting.. I think.. but I am a beginner when it comes to drafting..

[@wolfgang.walden.cad.training]

Hi, yes it is kind of strange, but it works ;)

[@borko4380]

Thats the way it works in NX

[@vijayanandhegde]

Sehr gute erklaerung!! vielen Dank

[@wolfgang.walden.cad.training]

Bitteschön :)

[@metalgrade2697]

Thanks a lot Wolfgang!!! Really helped me out! Was getting confused as to why the exploded refused to appear in drafting D:

[@wolfgang.walden.cad.training]

Great - it is confusing - you´re welcome.

[@vernarddevilliers7899]

You sir, just saved me.

[@renatocruz26]

Excellent video, congratulations, it helped me a lot!

[@wolfgang.walden.cad.training]

Thanks, you´re welcome.

[@idemirtas9034]

Exzellent. Super Video Danke.

[@wolfgang.walden.cad.training]

Thx - you´re welcome.

[@bosnianswede]

Thanx for this tutorial. Is there a button somwehere in the ribbon to switch back and forth from draft to assembly and vice versa?

[@wolfgang.walden.cad.training]

No, of course you could use a keyboard shortcut.

[@ramadanramadan8885]

That was helpful, thank you much

[@wolfgang.walden.cad.training]

Great, you´re welcome

[@jayeshlakhani3912]

Hello,I have a question regarding Exploded view.How to export Exploded view in Siemens NX as a JT file?Thank you in Advance!

[@wolfgang.walden.cad.training]

I don´t know if that is possible, I´ll have to check for myself first. I suppose you will need a work around..

[@niteshvalecha8913]

Hi, I need to know, Is there any option to set auto page number. Suppose there are more than 60 pages in one drawing file. And to separate all pages, we write in down right corner "Page 01 of 100" and so on... But Currently, I'm doing this manually. Is there any option to make this auto changeable?

[@wolfgang.walden.cad.training]

Obviously it is possible. If you use one of the siemens drawing templates - there is that sheet number and the total of sheets. So you could try to adjust that template. But I will try to do a video for a custom template.

[@niteshvalecha8913]

@@wolfgang.walden.cad.training Thanks for your reply. Please make a video tutorial for this, to set auto page number. There is no such type of single video on KZbin. Actually I also have numerous question, please help me I never get time to find those questions. Now we'll are in Lockdown due to COVID-19 So now is the time to utilise this. 1.) In drafting - How can I show the exploded view of assembly file? 2.) Sometimes during drafting, when pages are near about 100, I face issue to copy a template in same file. It show me a error of " Internal memory error" And at the same time, this error shown on every Nx file, either I just opened it, or a blank file. (Current solution that I found out- Close ALL file in nX, open New file for drafting, Do drafting in some pages, then save it Now open that file, and now its complete error free.) 3.) When I do drafting of a plate via "Hole Table". Is there any option to lock particular cell. I tried but that's not working. 4.) User defined feature is not working in Nx 5.) Some tips & trics to increase production of design.

[@iyinoluwao3393]

If I'm creating both an engineering drawing with a sectional view and an exploded isometric drawing, which should have the parts list?

[@wolfgang.walden.cad.training]

As you can have only one parts list in nx - I would go for the explosion.

[@houhuachen8085]

thank u very much!

[@wolfgang.walden.cad.training]

You´re welcome

[@murthyvlogs6833]

Super

[@wolfgang.walden.cad.training]

Thanks :)

[@Kutluca-]

hi mr wolfgang ı can say I learn nx your tutorıal thank you but ı chance page drafting and modeling (control and m or n ) ıts open but modelıng but ı cant see my model

[@wolfgang.walden.cad.training]

You have to take care - you can do your drawing in a new *.prt file or in the same. So maybe you messed it up.

[@NamNguyen-pi7ub]

thank you