Reballing BGA PS3 (RSX/GPU). Naprawa YLOD RLOD / YLOD RLOD FIX. Playstation 3.

[@qwaszxerdfcvtyghvb]

that is just great ... I'm speechless, the hands of this guy are so stable i didn't think such a repair is possible without a very expensive and specialized tools and workshop, thank you for sharing

[@BillMcGirr]

I have no idea how this popped up on my feed... But that was amazing. I love a skilled craftsman.👍

[@mrmactknife]

Outstanding workmanship. My PS3 has just RLOD'd today, after owning it for over 10 years. :(

[@ExpressITpl]

Zwyczajnie ;) Kwestia doświadczenia i sprawnego oka. W każdym z czterech rogów są kontensatorki które ułatwiają pozycjonowanie - wystarczy że każdy róg układu jest ułożony tak samo względem kondensatorków a po drugie układy bga mają cechę "samopoycjonowania" się w trakcie rozpływu - nie szkodzi im minimalne przesunięcie, tym bardziej przy stosunkowo dużej średnicy kulek 0,6mm jak w przypadku układu RSX w PS3.

[@adelamir4681]

You're a Master , you are really a professional , if you teach then your students are the most lucky ones to have a master like you , you did every single touch so well as if it is the work of a computerised machine , and you respect the chip and protect it from the electrostatic charges , I thank you very much , I wish I was in your country to be your student , May God bless you and your teachers

[@C7TJFVB7CAZ_TyonorShap]

He isnt a professional, the main problem isnt the solder balls itz the thermal paste under the heatspreader ON the cpu and rsx, it isnt the reball first they NEED to try if the thermalpaste is hard under the IHS of the chips, if it is he just put a new one on the die and also ontop as usual, No fuckin reball needed, but f this dosent work then reball but if he is reballing the chip without taking a look under the IHS then if it is broken he can reball 5 times in a row and the ps3 will still kick its bucket, and thats professional not thoes reball dudes here but they seem not to get what the REAL problem is, its the Thermal Compound under the IHS peace!

[@z00h]

Fucking hell alterchen, what a beautifully written piecechen on the problemchen. I can tell you're a gentlemenchen and a scholarchen.

[@captaincrunch1707]

C7TJFVB7-CAZ TyonorShap GER & ENG ...if this solder whisperer can do this then I'm sure he checked everything under the sun. Maybe your just jealous of this cat's talent

[@punker4Real]

@@C7TJFVB7CAZ_TyonorShap turned out it was the capacitors causing an issue rather then the chip it self

[@bardockofalecido]

@@C7TJFVB7CAZ_TyonorShap You’re wrong as well brother, the real problem is (90% of the times) the RSX knocking on deaths door, Nvidia ordered a lot of those faulty chips from TSMC, the CECH-20xx models also shipped with the ever unreliable 65nm version of the RSX, the only reliable versions of that chip is the 40nm and 28nm, in conclusion, applying new thermal paste will mitigate the thermal throttling, but it’s definitely not a solution, and reballing is useless most of the time

[@felipesoar]

i dont know why i'm seeing this.

[@angus4678]

@PaPiRiCoSuAvE cool essay

[@Arado159]

@PaPiRiCoSuAvE Ain't nobody got time to read all that

[@SingTodayi]

You can't use "see" in continuos time PUNK!

[@AndreasHLux]

Me2 somehow, but its amazing what people share to do... 🤣🤣🤣

[@georgemartinezza]

just example not as old :D kzbin.info/www/bejne/h2nEoGZ3hpJoqdE 👆 just for the numbers

[@aminitm]

Nice job, it's the first video (I've seen) on youtube without any sound takes near two million views!

[@ExpressITpl]

Już tłumaczę: Zapewne chodzi o moment czysczenia ukłądu RSX. Proszę zauważyć, że napis "czyszczenie układu z resztek starego spoiwa" pojawia się od pierwszego momentu - czyli zdejmowania cyny, aż do samego końca - czyli czyszczenia z topnika. Po prostu osoba montująca filmik ujęła to jaki jednolity proces bez rozdrabniania na pojedyncze czynności - wszak w tym etapie chodzi właśnie o wyczyszczenie układu z reszek spoiwa, czyszczenie topnikiem jest tylko jedną z czynności tworzących całość :)

[@jedrula77]

Skuteczne to całe reballingowanie jest jeśli układy nie były przegrzane przez zabrudzone radiatory i nie posiadają pod układem krzemowym wadliwego spoiwa w serii wadliwych układów -Flip Chip poczytać o wadach. Inaczej to roztopieniu podlega spoiwo pod plastrem krzemu a obudową BGA układu i jeśli pod wpływem przepływu prądu został uszkodzony przewodnik (mikro kulki pod chipem krzemowym) to naprawa na krótką metę stąd krótka gwarancja 3 miesiące. Takie same prądy muszą zostać przeniesione przez znacznie mniejsze przekroje kulek pod układem plastra krzemowego tyle, że jest on zabezpieczony klejem przed utlenianiem. Można by się pokusić o zalanie w nowej płycie szczeliny pomiędzy płytą a obudową BGA w celu uszczelnienia i zapobieżenia utlenianiu. Coś jak te gluty epoksydowe w Xboxach na narożnikach tylko ładnie dookoła obudowy :D No i nadal nie mocują stabilnie płyty do kawałka grubej( tak z 1-1.3mm) blachy z wytłoczonymi wzmocnieniami co by się to od cyklicznego grzania i studzenia nie gibało bo często aż strzela i trzeszczy nowa płyta w konsolach przy studzeniu po kilku godzinach pracy. Ale kogo to interesi ma działać rok max 2 a dalej zaczyna się kombinatoryka :D Ps. mi X360 z 2006 wytrzymał 6 lat z przykręconą płytą do obudowy i radiatorem dociskającym GPU ale to zrobiłem całkiem inaczej niż to jest w necie opisywane. Płyta nie została odkształcona. Teraz tylko nowy układ ewentualnie kondensatory nowe może polimery i dalej podziała.

[@jm036]

They hated him because he told them the truth.

[@johnsimon8457]

8:06 hold your breath, say a prayer 🙏

[@mjalil28]

most defficult step

[@maxmax-xx7nw]

@@mjalil28 not really , you don't have to center it perfectly , later it will "move" to correct place :p

[@GORF_EMPIRE]

How do you even know you have the chip lined up properly? That's just amazing! Mind blown!

[@TimoGraw]

I've always wondered how reballing works. Thanks for sharing. May need to send you my 360 ;)

[@Dvoracekmara]

open and take apart Xbox 360 is difficult bi itself, i try it with no success (video with opening is there, but i do not handled it)

[@pelbax]

you sir are totally correct... i hope that everyone could watch this video so they know how bad are the "home made cheap" repairs...

[@ExpressITpl]

To prawdopodobnie był topnik, możliwe że dostał się pod "blaszkę" w trakcie czyszczenia plecionką. Nawet w najwyższej temperaturze rozpływu topnik nie odparuje całkowicie - lecz to też zależy od tego jaki topnik jest stosowany. W tym przypadku był to AMTECH NC-559. W każdym razie wszystko przebiegło prawidłowo, gdyż po wlutowaniu układu konsola ruszyła.

[@cme64]

Great job recording the steps clearly.Although I would prefer to have more details on what type of flux you're using, cleaning substance (isopropyl alcohol?), the fabric piece used for cleaning, the material of balls, and temps u used. If you mention those details, hat's up for you. Also where do you buy gpu/cpu patterns from ?

[@luckylarz4269]

@@husky3g but how will I learn?! The master needs to teach me haha😎

[@sergiomaldonado9417]

Lol

[@gadiensguide4385]

Don't buy them, make you're own holes with a small drill, don't know what you will do for balls though..

[@VegazUPK]

Reballing done but faulty NEC/TOKIN capacitors left intact. In 2012 you might not know that, but nowadays you should always check and replace those first as they are the main reason for YLOD on all the phat (CECH A to Q) and the very first Slims (CECH 2000 and 2100).

[@JackiepieYT]

i dont have ps3 .but this video is so relaxing amazing job bro .

[@WattDo]

This was a really good video, i had wanted to see this done on a professional level. I had just one question though: How do you ensure that the chip is properly lined up on the motherboard before soldering the GPU back on?

[@vhulheim]

6 years later here's your answer: It's black magic sorcery.

[@robert-kw2tm]

Only fortune

[@TheKyuber]

8:25 He perfectly aligned it with those metallic bumps on the motherboard found right under the tips of the RSX's corners! Sorry I couldn't have pointed this out years earlier, but just in case a PlayStation 3 you have is still having issues, I'm happy to help!

[@kiela7859]

Po 8 latach wiem że to tylko na chwilę , nie są problemem jak wszyscy myśleli spoiwa i rodzaj cyny , a Litografia i nadmierne temperatury . Nawet po całkowitym reballingu problem wraca :) Zeszli z litografia w Sliamch czy SuperSlimach i problem to margines konsol wydanych

[@ahmedp800]

This was so satisfying to watch! Thank you Strange both Sony and Microsoft used crappy solder in their hardware.

[@MrQwerty0]

that's what you do when you're producing for money and not quality and in MS' case paying for the repairs downline

[@maulerrw]

once its at melting point thats all you need. If done correctly it will resolder to the board and that will be that. You will know as the chip will settle slightly lower, and that will be that!. Keeping things perfectly still is very important so nothing short circuits. pressure must be constant and free hand is not advisable. (making up a jig makes things easier)

[@darksb3r]

This was awesome to watch. I had no idea how they actually did this.

[@robertjarocha9887]

No kurna,to jest dopiero dobrrra robota.

[@MalawijaSMITH]

Ale się czepiasz! Znalazł sie profesjonalista.

[@AndehX]

Just a heads up for anyone watching this video in 2018, Reballing does not fix this issue. It's a temporary band aid for a much bigger issue. The real issue is inside the chip itself. The chip gets permanently damaged due to excessive heat, caused by poor cooling. There is no fix for this. The only thing you can do is replace the thermal paste under the heatspreaders and hope that no permanent damage has been done to the chip.

[@GeoffereyEakinsTech]

One of the most gangster things I have ever seen in my life.

[@yazdanivenegas2384]

you say it bro!

[@spiritualantiseptic]

Damn, that was like a surgery. Almost literally taking the heart out, and stitching it back together so there are no leakages lol.

[@BMR86]

This video was worth my subscription to your channel amazing stuff!

[@jabalngamau4599]

God I wish I could do this. But I think it's better I just try and get a PS3 slim now instead. What a great guide dude.

[@benek7625]

widzieć twoja minę po 8 latach kiedy dowiedziałeś sie że wystarczyło wymienić jeden kondensator, bezcenne :P

[@Qguar01]

Polak potrafi. Pełen szacun.

[@SPLPuroOne]

Great how-to! But maybe be careful about solder smokes, even with rosin dipped ones

[@nickst2797]

How did you remove the stencil mask from the chip without moving the balls?

[@TeknikIE]

+Nick Stolis Ultrasonic cleaning

[@elofos0815]

@@TeknikIE the flux hold it, but its a little tricky, u need experience

[@hasve978]

I personally just change BGAs with a new one by hand using certain tools for reflowing.@@elofos0815

[@rogeralex4803]

What machine do you use

[@hasve978]

I use one of these(www.leister.com/en/plastic-welding/products/hot-air-hand-tools/hot-jet/hot-jet-s) for reflowing. Works great on almost parts depending on how much copper the pcb has. Sometimes I use a pre-heater in conjunction with that.@@rogeralex4803

[@StellaDave]

Very impressive vid, fascinating stuff! Always wondered what reballing really looked like!

[@RaWReTrOz]

Profesionalnie wykonane :) nidlugo zawioze do was moja konsole z YLOD

[@ExpressITpl]

Lutownica to PACE ST-50 z rączką TD-100 a zestaw grotów do tej raczki znaleźc mozna na stronie firmy RENEX.

[@ovalwingnut]

You are an ARTIST, my friend :) Cheers!

[@yoshimitshu77]

Niezła robota, na pewno się zgłoszę jeżeli moja konsola podda się YLODowi :P :)

[@batman8589]

AMAZINGLY SIMPLE. If one has the tools. Thx guys great video

[@szymoniak75]

Bardzo profesjonalnie wykonana robota, ale w angielskim tłumaczeniu sporo błędów :( lepiej już chyba było użyć tłumacza Google

[@ActionThanos]

perfect! I have now been inspired to blow up my defunct ps3 with a shotgun and buy a slim! Great video on what I will never attempt!

[@succubusleterdeathtoall8791]

great yet another lost ps3 fat a- - sorry that my thing lol

[@sticky170]

Don't bother. It's not the reballing but the reheating of the CPU that fixes it. Just heat it at 125 degr for 10 miniutes will have the same effect. It's not the connection to the board but the waver to the pins that's the problem.

[@tillmanadkins713]

@@sticky170 ROHS complient solder requires higher and higher temps to reflow each time you do that. It should be replaced with leaded solder in accordance with US Air Force Policies to insure substainment.

[@sticky170]

@@tillmanadkins713 you're missing my point. It is not the reflow oud the cpu contracts to the motherboard that fixes the problem. It's a cheap cpu and reheating the cpu temporarily fixes the internals. But ends up breaking again as it is a shitty quality to begin with.

[@Djbiohazard1991]

@@sticky170 Usually, there isn't any problem with the IC itself. The 7th gen game consoles all relied heavily on ROHS solder. Guess what? All of the consoles in that generation have issues, despite having different BGA IC's. It's usually a cold joint under the chip, which heating sometimes does "fix", but only for a little while. It's still the old solder that caused the issue. Reflowing in this case is a temporary fix, and reballing (what's shown in the video, and suggested by Tillman Adkins) is to replace the leadless solder, and replace it with leaded solder. This will break ROHS compliance, but it will give better than new results.

[@EmilePolka]

the pattern that person was saying is called "BGA Stencil template" In PS3 you need a specific stencil template on certain model;s, on 90nanometers GPU all phat should have the same template, some Slim PS3 had 90nm but some of them are smaller now so you need a different stencil template for that too.

[@TheLife0025]

I can say this job is done by a perfect technician..great video..What was temperature of your iron when u were cleaning gpu chip and motherboard.? can we use rework station's frame instead of stiffen frame..

[@stevehappe8583]

Interesting. I've never seen something like this before. Thanks for sharing.

[@nick1822]

That was legitness

[@7uc4s]

That's a fucking PRO

[@Kingvik7Gaming]

No shit....I couldn't do this....putting on thermal paste was as hard as getting a new high score in minesweeper for me

[@tyonorshapzc7tjfvb7-caz]

no he aint, cuz this aint fixes it, every Pc enthusiast like me does know how to, basicly CPU deledd ;) Heres some vidz that push your knowlege a bit cuz u need it ;) kzbin.info/www/bejne/Z3LGdqdmbJiImtU kzbin.info/www/bejne/pH3Smp18bpJmhqM

[@spiritualantiseptic]

@@tyonorshapzc7tjfvb7-caz you what?

[@roniadaniels1453]

@@tyonorshapzc7tjfvb7-caz Reading your comment is really painful, I wish I had a good link to a improve your grammar.

[@Andy-hi9do]

Bolting down the motherboard to a perfectly level surface and using a heat gun on the chips worked both on my ps3 and 360.

[@maulerrw]

De-soldering braid. its a copper braid that 'sucks' the old solder into it when heated with a soldering iron

[@ExpressITpl]

I bought it in polish shop RENEX. It's iron for PACE soldering station with TD-100 stick. Catalog number: PC11240536.

[@athakids6905]

@QUERO APRENDER b dvvģgu97tg7jplu

[@kaczkinson]

a takie nieśmiałe pytanie.... gdzie można dostać szalony do ułożenia kulek?

[@carlostesla3446]

Jedno pytanie. Dlaczego brakuje kadru jak ściągasz matryce i zostają kulki na Kobyłce??

[@klocart]

To się sprawdza przy układach o małej masie, układ RSX z radiatorem waży jakieś 200 g więc nie może tu być mowy o samopozycjonowaniu.

[@lazys3m]

Zastanawiam się po co reballować uszkodzony chip? Przecież konsola nie przestaje działać z powodu zerwanych kulek pod układem tylko z wady rdzenia tego układu. Temperatura przy reballingu czy reflow układu stawia go na jakiś czas na nogi ponieważ przywracamy połączenia rdzeń-powierzchnia układu. Lepiej układ wymienić na nowy, wówczas taka naprawa ma sens.

[@ExpressITpl]

Masz rację :) Jednak na tamten czas mieliśmy za mało danych na ten temat aby to stwierdzić. Jednak po fali reklamacji przekonaliśmy się boleśnie, że reballing nie rozwiązuje problemu, a nowych chipów niestety brak. Dlatego też od kilku lat zaprzestaliśmy naprawy konsol. Pozdrawiam.

[@michacyber5609]

W starych ps3 fat przykładowo wynikało to naprawdę z odlutowanych układów bga - rsxów, ale w późniejszych konsolach faktycznie była to wina wadliwych układów, a nie połączeń.

[@jedrula77]

​@@michacyber5609 Wadliwe spoiwo pod chipem dotyczyło większości układów do końca 2009r. Pewien procent zapewne posiadał zerwane połączenia pomiędzy PCB i BGA lub obie usterki. Mocne układy i pracujące w wyższej temperaturze z racji zapchanego lub mało wydajnego chłodzenia mogą się "odklejać" od stresu termicznego i dzisiaj. Często karty z zerwanymi kulkami przekaszane trzeszczą mimo, że jeszcze działają. Takie soecyficzne skrzypienie i nie są to wyłacznie ścieżki w laminacie ( w nie na). Robiąc dla siebie wystarczy dobra chemia, taśma i folia, cyfrowa opalarka lub mocniejszy hotair na statywie, koniecznie podgrzewacz np. z grila z termostatem do max 150-170stC(wtedy potrzebny dyfuzor gorącego strumienia by nie popalić laminatu) , 2-3 sondy pomiarowe i trochę oleju w głowie. Żadna większa sztuka wygrzać taki układ podlewając odpowiednio przygotowanym topnikiem, który wniknie nawet w pęknięcia na kulkach. Konieczny wręcz niezbędny warunek to idealne oczyszcenie przestrzeni pomiędzy PCB a obudową chipu. Inaczej reflow możne nic nie dać a narobić bałaganu. Taki chip ma określoną ilość takich cykli a samo czyszczenie ze starych kulek też go nagrzewa. Później wstawienie nowych i znów cykl tym razem mocniejszy. I później wlut. Jeśli zdegradowały się luty pod chipem to szybko to wyjdzie po reflow a jeśli zerwało połączenie pomiędzy PCB a BGA to taka naprawa Reflow jest skuteczna jak rebaling ale dostarcza mniej stresu termicznego chipowi i jest tańsza i mniej pracochłonna. Z nową dobrą pastą i poczyszczonym/poprawionym chłodzeniem karta czy inne ustrojstwo może pośmigać nawet dłużej niż do tej pory. A wiadomo szczególnie karty szybko tracą na wartości i się starzeją technologicznie znacznie szybciej niż CPU czy ramy. Więc po takiej naprawie tym bardziej wykonanej samodzielnie, jeśli padnie kolejny raz to można ją wyrzucić do elektrośmieci, wystawić jako uszkodzoną lub zachować w kolekcji jak ktoś zbiera złom :D Obecny sprzęt elektroniczny i nie tylko w większości przypadków przetrwa w śladowych ilościach do czasów aż zostanie uznany za retro... To dopiero będą rarytasy za te 20-30 lat xD Nic tylko nakupić, opakować szczelnie najlepiej próżniowo z granulatem na wilgoć, do suchego magazynu i lepszy zysk na emeryturze niż z lokat w złocie :D

[@Ty_ThatGuy]

Guys, don't expect this person to answer your questions. I left 2 for him a year ago and still no reply.

[@BornotB-ij9xk]

Wow,funny how people recently thought YLOD was caused by NEC but in reality,it has always been the RSX.This man was literally 9 years early

[@sonyx5332]

Nonsense. The syscon log will let you know what or where the problem is. Don't say that it has always been the RSX without no proof. I have a refurbished console officially from Sony and it randomly gave me the YLOD. I changed all NEC Tokins and the console worked fine after that plus it ran cool.

[@jm036]

No, leadfree solder BGA is what everyone thought it was for an eternity and even today I see people spouting this nonsense. They don't break very much, you need a lot more mechanical stress to break it. In the PS3 community maybe 3 years ago everyone got convinced it was actually the rather unique power filtering capacitors used, which may have a shorter than usual lifespan but its not THAT bad. Really it's the connection of the silicon die to the interposer, which was especially brittle and reinforced with an epoxy that went soft at operating temperatures, the heat from reballing could make this connect again for a few months but there isnt any permanent fix. The "paper trail" was always there, Nvidia was hit by a big lawsuit for this, some research would have saved a lot of time and effort.

[@gregham3308]

nice solder wick...looks like hollow braid...have never seen hollow braid before ..Also, to those using braid for first time...make sure its fresh and not oxidized.

[@luizemediato6987]

What is the cost of a PS3 Fat reballing ? Excellent video.

[@ExpressITpl]

Yes. This is the same :)

[@oleszdotcom]

Nie przegrzales tego ukladu wlutowujac go? Nie wycieka Ci kropelka cyny spod przyklejonego ukladu pamieci? Nie wydaje mi sie, zeby to byl topnik, bo w tej fazie powinien juz wyparowac. Pytam, bo sam zabilem pare RSX' ow zanim sie nauczylem ;) Damian

[@qtpan]

Although this is old video, this reballing is fail because it still uses a Tin rather than the reliable Lead for solder point.

[@Fahadshahbazmughal]

Hi....Im facing a problem with Ps3....When i press power button greenlight showedup and my console automatically shutdown after 5 sec.....i have tried replacing PSU but same problem....I have reballed the RSX But still No success....I Need ur help Sir!

[@worldgate989]

Yea looks like im paying someone to do this to my 360 that gives the error code for this.

[@Pjhr100]

you meaning the RROD Right ?

[@worldgate989]

Yea, no way i can do that at my skill level.

[@worldgate989]

I would probably burn the traces or kill the processor.

[@PR0XIDIAN]

***** The 360 probably doesn't need a reball. Usually it just needs thermal paste which is super easy.

[@worldgate989]

Seth Forbus Thermal paste, pft, more like AS5 :D

[@pilartronicltd9104]

1. Jakim roztworem pokryto stare spoiwo ? 2. Jak nazywa się ta specjalna, szeroka końcówka do lutownicy, którym spoiwo jest rozprowadzone? 3. Co to za brązowawy pasek w dalszej części ?1:36 4 Jaki topnik został użyty ?

[@MegaThethinker]

1. Powinien to być średnioaktywny topnik np.Amtech. 2. Grot szpatułkowy - w szpatułce jest grzałka. To rozwiązanie oparte na niewymienności końcówek gwarantuje lepszą kondensację ciepła, niż w sytuacji wymiennych grotów, gdzie pojemność cieplna i straty migrującego ciepła są większe. 3. Plecionka miedziana. 4. Powinno się rozważać jaki powinien być użyty.

[@pilartronicltd9104]

@@MegaThethinker Ok dziękuję za odpowiedź. Właśnie przymierzam się do wykonania reballingu samodzielnie. Koszt wykonania reballiingu przez doświadczony serwis przekracza kilkukrotnie wartość konsoli, zatem trzeba działać samodzielnie.

[@kareprogchiptuning]

Good job bro very professional work 👏

[@CitizenTechTalk]

Super impressed! Excellent job!

[@butth0le_inspector]

You definitely deserve more subscribers

[@GainingDespair]

very interesting but I have to wonder wouldn't desoldering and re-flowing cause damage to the CPU/RSX? The temps required to melt the solder are far beyond the temperature the package was developed to withstand. Than again they had to do this same thing to get it on so I find it odd. Maybe the side effect's are minor enough but I know the CPU/RSX will shut down at around 85c protect itself from damage due to overheating and solder melts at near 200c.

[@zarkitek]

7:06 wow with the heat they start to line up, it's hypnotizing

[@dropfry]

Why don't I see any flux bubbling underneath the chip while you do your final weld?

[@fatihkan2601]

Watching this is so satisfying.

[@RobertoNapoliRMX]

my Playstation 3 is the cechc04 model works with all games but only with Granturismo 6, the last of us, and uncharter 3 turns off and the red led flashes, then I press the power button the led stops flashing, I press once again and it turns on and works perfectly with all games, as I use one of the three games listed before it turns off.

[@daveed1797]

Way to go!!! Very informative

[@citylockapolytechnikeyllcc7936]

Excellent demo.... Volvo is diabolical... some micro-controllers have a no-ball area with epoxy adhesive.... try reball, you rip pads. Have not seen how this is resolved

[@solderkingtv6353]

Good video. They type of flux being used is a re-work tacky flux. We manufacture the SolderKing halogen free re-work gel in a 10g syringe. Very easy to use and as it is halogen free it is safe to leave on the board

[@spidermcgavenport]

I'm surprised that they didn't delid the processor and place gallium paste in it while they did this entire process.

[@WarpPal]

Spider Mcgavenport Everybody who reballs NEED to replace the TIM under the heat spreader because the heat from the reballling process destroys the old TIM and that's where most of the heat problems for the RSX originate even if you don't need to reball.

[@tosti7754]

Powiem Ci - pełen profesjonalizm ;-) Jakiej stacji używasz na tym filmie ?

[@mjalil28]

please link for buy solder iron with bga i mean the large head used in this video

[@NEBUL4]

first 10 min video WITH NO SOUND that i watch and enjoy xD

[@Wedeemgaming]

I'm getting no power... I switched all the power components from a working PS3 and still no power... Have any ideas what that could be?

[@cac2244]

6:43 you did not show the crucial step of removing template... I assume it is the most critical part of the operation...

[@RandomNullpointer]

my guess is that the chip is placed on the stencil, then flipped, and then the stencil is removed... very slowly

[@majortom91gsg]

I was actually waiting just for that part and then it's skipped

[@RandomNullpointer]

@@majortom91gsg It's probably s trade secret

[@Krzywo.Records]

serwis który ci zrobi reballing. Jeśli powiedzą że reflow lepszy to podziękuj i wyjdź. Reflow jest to wygrzewanie. W moim xboxie też chcieli reflow ale okazało się że ta kluka która trzyma gpu się oderwała i ona wywołała rroda i teraz muszę do serwisu ją zanieść.

[@MrMarek112]

Ile kosztuje naprawa,nie wiem czy się to opłaca naprawiać jak nowa konsola kosztuje już za 800zł.

[@pomidortv797]

Coś mi się tu nie zgadza. Model G który widać na rebalingu, a na włączaniu model C z zewnetrznym wlącznikiem

[@Ashkaanaak]

is it ok to take the gpu/cpu without heat shield? cause I already have take the heatshield to change the thermal paste between! do I have to stick the heat shield back on the chip in order to unsolder the chip?

[@geoper2]

But if you use kapton tape doesn't it prevent heat from transferring to the chip below?

[@krzysztofrak5731]

A jak zdejmuje się później to sito, żeby kulki nie pospadały?

[@67CopperHead]

i have a question know when u get the ylod im a PC builder not a console builder umm when they reflow and reball it is it like back to brand new stage ust the glossy case looks like poo but the inside is brand new or will it all happen agan

[@medicalcannabis4282]

how did you make that laser and is there a diy video to make a soldering lazer like the one you have

[@xthebest444444444]

I have 3 models of Backwards Compatible and I asked a local shop to do a reballing to them he said it's not worth it . It will fails after couple days. I asked him you talking about reworking like heating them ? He said all 4 usb models always fails once the YLOD comes even if you do rework with heat or reballing it will give the same result ! . Is this true?

[@nabs3178]

Not really no just they break easily because they don’t cool proeprly so use a mod to increase the fan speed and it’ll increase the live off it

[@jajasudrajat628]

A man doing what a machine has made..

[@punpck]

Nice video ... but only used BGAs need reballing. Why would you unsolder, reball it and resolder the same part? :)

[@bobskie321]

Do you have to remove the battery? The battery has been removed (left center at 2:40).

[@Toqhy]

How much temp did u put to take off the cpu and how much temp for putting it down again

[@ExpressITpl]

Hi! The flux is: AIM NC254.

[@metaphor239]

Where do you work from? Do you still do this professionally? Can I send you my PS3?

[@kiko3782]

Perfeito, que Trabalho maravilhoso

[@luisnarciso1974]

Thank you for showing this video, I have some doubts, the flux beyond what other products you use (that tape you use to clean the weld and the liquid that gets on tape) how the balls are attached to the chip before heating? Ebay saw in the grid and the balls to be sold, but the other products do not know which ones. Many thanks for your attention.

[@BBaRtBT3]

nie i nie chcialbym ale w razie co to chce wiedziec gdzie sie wzrocic o pomoc. Slyszalem ze jeszcze w zadnym slimie nie wystapil ylod ale nie wiadomo

[@capoorexvlog603]

Hello please tell me.. can i replace gpu 65 nm with 40 nm or 90 nm???? My old dameged gpu is cxd2991egb... Or can i use on this system cxd2979gb????

[@Huppat]

Sick, really sick work. Great Job.

[@persom55]

where can i get a soldering iron with a spade/ flat tip like in this vid?

[@lupojacobo9892]

Ebay