Extra: Newman Ph3 on C2 VTS

[@supersniperuk]

Very nice car, also it sounds great with them camshafts

[@mark_forgetaboutit5971]

@@supersniperuk thank you so much! I love my car with these mods 🙂

[@guiforest8553]

Buen trabajo felicitaciones!!!!! Has cambiado inyectores por por C2 R2 o algo más? Me encanta como responde y suena, línea de escape original?

[@mark_forgetaboutit5971]

@@guiforest8553 gracias Amigo! Inyectored de serie y todo l'escape de 60mm con el embellecedor de escape de serie modificado

[@sergioarena269]

Ciao come si collega il manometro della temperatura acqua ? Avendo io una C2 anno 2006 il cruscotto non presenta la temperatura acqua. Grazie mille se risponderai

[@mark_forgetaboutit5971]

@@sergioarena269 Ciao Sergio, ma certo che ti rispondo, io cerco sempre di rispondere a tutti. Allora lo strumento si chiama Autotool e si attacca tramite presa OBD, e segna temperatura acqua, Map, Iat e voltmetro.

[@carlomennellaf15]

Bomba 😎

[@mark_forgetaboutit5971]

🔥

[@inpesca.official]

Non preoccuparti io markkk noi siamo qui a sostenerti. Che sound, fai sognare 😍

[@mark_forgetaboutit5971]

Grazie 🥰

[@Cris-qo8fg]

Grupo 14/60 ? Muy buen video!!

[@mark_forgetaboutit5971]

@@Cris-qo8fg Si, claro 14/60! Gracias Amigo! 🤝🏻🙋🏻‍♂️

[@Cris-qo8fg]

@@mark_forgetaboutit5971 Muchas gracias por responderme!! Saludo desde Gran Canaria amigo

[@Ilkami]

Io volevo montarle sulla 206 1.6 alla testata hai fatto qualcosa o tutto stock? Valvole molle ecc e Soppratutto quanti km?

[@mark_forgetaboutit5971]

Si, tutto OEM, 180k km

[@Ilkami]

@@mark_forgetaboutit5971 okok… non hai manco fatto gommini valvole punterie ecc?

[@mark_forgetaboutit5971]

@@Ilkami Nope

[@gennarodefilippo7302]

Per uso esclusivamente stradale le consigli, i consumi andando piano sono aumentati di tanto?

[@mark_forgetaboutit5971]

No, più o meno sui 12/13 stando a 115km/h in 5a

[@massimomassy1316]

👍👍

[@jasperpakk9185]

Hi, I wanna install this exact setup on my car I have a Peugeot 206 with tu5jp4 engine. I was wondering how do you find this setup I see you have Newman ph3 camshafts and nfs air manifold, how does it perform is it your daily car ? how is low and mid rpm and torque did it get too weak? would you recommend this setup ? I currently have cat cams 704 camshafts and wanted to upgrade to ph3 just wanted to know your opinion and experience over this setup on your citroen c2

[@mark_forgetaboutit5971]

Hi Buddy, I think this setup fits perfectly on these engines, I would recommend jp4s intake heades as well on yours, the only cons are low torque at low rpm and 4-1 exhaust headers which are not good for jp4s (low rpm torque like I just said). I personally would try 4-2-1 Saxo VTS 16v headers first and then eventually upgrade for better cams!

[@jasperpakk9185]

@@mark_forgetaboutit5971 really appreciate your help. I have 4.2.1 headers installed on my car Some guys suggested me to install stroke crankshaft to regain low/mid rpm torque but don't know pros and cons of stroke crankshaft.

[@jerrardtruck9473]

Che tipo di fari sono quelli posteriori??? Belli!?

[@mark_forgetaboutit5971]

Sono from England, li vendono su Ebay ogni tanto!

[@jerrardtruck9473]

@@mark_forgetaboutit5971 ciao ho guardato su ebay e non ci sono, non riesco a travarli! Potresti aiutarmi a trovarli? Grazie

[@mark_forgetaboutit5971]

@@jerrardtruck9473 www.ebay.it/itm/326077987074?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=2f5uXvkzSaS&sssrc=4429486&ssuid=eMs30aXLToC&var=&widget_ver=artemis&media=COPY

[@jerrardtruck9473]

@@mark_forgetaboutit5971 grazie mille li ho comprati

[@jerrardtruck9473]

@@mark_forgetaboutit5971 ciao Mark, li ho messi i fari solo che le luci di posizione quando spegni la macchina rimangono accese poi dopo di un po' si abbassano di tensione però rimangono sempre accese! Come mai? Su sono a led nelle luci di posizione! Sapresti aiutarmi? Grazie

[@kiliancurquejocazorla494]

Buenas, cuántos cv dio en el banco de prueba?

[@mark_forgetaboutit5971]

147.2hp 163nm con 32 de temperatura amigo.

[@furiacecaGT]

costo di una simile modifica? la mia e gia mappata, ovviamente poi andrebbe mappata di nuovo giusto?

[@mark_forgetaboutit5971]

Il costo dipende da molti fattori, andrebbe mappata nuovamente, certo.

[@antonin3715]

Am I dreaming or it revs up to 8000 rpms ? How did you do that ?

[@mark_forgetaboutit5971]

@@antonin3715 you're not dreaming Buddy, ECU modded 👌🏽

[@antonin3715]

@@mark_forgetaboutit5971 OK nice, just bought my own vts a month ago and already thinking about some mods :)

[@mark_forgetaboutit5971]

@@antonin3715 enjoy your new VTS, you'll fall in love with this car! Try it in the corners 🔥 On straight lines let the Abarths go 😅

[@antonin3715]

@@mark_forgetaboutit5971 for the moment im impressed by the corner speed, i feel like the chassis can handle a lot more horsepower than stock

[@mark_forgetaboutit5971]

@@antonin3715 yes it does

[@isusnadjelu3939]

hello, do you maybe have a graph of your nm and hp, and is your gearbox and differential stock?

[@mark_forgetaboutit5971]

Yes both answers

[@isusnadjelu3939]

@@mark_forgetaboutit5971did you do any custom work on engine? and was it hard to mount them on the car?

[@mark_forgetaboutit5971]

@@isusnadjelu3939no mods, oem pistons, rods and valves. It's not hard but timing is a must. You gotta be carefull, or you're gonna be end up bending valves or worse.

[@isusnadjelu3939]

@@mark_forgetaboutit5971 thanks for the answer!

[@mark_forgetaboutit5971]

@@Orakolldheshkence Una R2 ha sui 170/180hp, devi fare: pistoni, bielle ad H rovesciato, scarico completo con 4-2-1, camme molto aggressive, elettronica seria e forse si a quei cavalli arrivi.

[@giorgosarchaniotis1989]

Hello my friend i have a Peugeot206 1.6 16v with camshafts from rallye 106, full supersprint exhaust system , differential 14×60 from c2 vts and aluminum intake from c2 vts . Can you tell me the specs of camshaft newman ph3 because im interested to buy them....!!!

[@mark_forgetaboutit5971]

-264 duration in Intake and Exhaust -9.01 valve/cam lift -1.55 lift @TDC I/E My mods: -4-1 gravity inox headers -58mm middle pipe -OEM backbox (not good because it's 50mm) -Saxo Cup intake from China 147.2hp and 163nm

[@giorgosarchaniotis1989]

I'm looking forward for the catcams 1323704 for the jp4s engine Specs 256 duration in intake, 248 duration on exhaust valve lift 10.00mm on intake and 9.50mm on exhaust valve lift @ TDC 1.40mm on intake and 1.00mm on exhaust. I wonder if the fuel injectors are enough with this camshafts.... You running stock injectors from c2 vts or bigger..;;;

[@mark_forgetaboutit5971]

@@giorgosarchaniotis1989 OEM ones, and yes, injectors are enough for your future mods. 💪🏼

[@giorgosarchaniotis1989]

@mark_forgetaboutit5971 Thanks my friend for your help I appreciate a lot 🙏 Now I have 142hp at 6500 rpm and 18nm of torque at 4715 rpm💪 supersprint is a fantastic exhaust with a very good sound not too loud but the mid pipe has 50mm diameter, perhaps in the future I need bigger diameter exhaust but I don't like much noise...😔

[@mark_forgetaboutit5971]

@@giorgosarchaniotis1989 106 Rallye camshaft help a lot 😎

[@LotusExigeK20]

Io tolgo il like, doveva essere la mia utilitaria, ma così mi porti sulla brutta strada 😂😂😂

[@LotusExigeK20]

Scherzo ovviamente

[@mark_forgetaboutit5971]

Ahahahahahahah 🤣 guarda che vanno ste macchinette! (Ovvio non come quel missile col K20 che hai) 🤪

[@sspaske4815]

Timing with ph3?

[@mark_forgetaboutit5971]

In open: 22/62 Ex close: 62/22

[@alabala5125]

0-100 ?

[@mark_forgetaboutit5971]

7.7sec

[@jerrardtruck9473]

Dove li posso trovare

[@mark_forgetaboutit5971]

Su Ebay 😎

[@jerrardtruck9473]

@@mark_forgetaboutit5971 grazie mille