EXTREME ONLINE STORE FRONT LIP AND SIDE SKIRTS INSTALLATION

[@julian-n4l2l]

Just got my own LT1 so happy to see videos out here like this! Thank you! Happy thanksgiving!

[@uReverseClan]

damn, that looks super clean. nice bro. i was going to do the front lip but looking at the side skirts, might do that too. it gives such an awesome look to the car.

[@100aventador]

Thanks! Yea definitely go for it!

[@emmexfyv]

Makes the car look awesome!

[@The1PhillyPhil]

Very nice. I’ve been on the fence about getting these until now

[@100aventador]

Go for it!

[@patt1367]

Damm that makes a huge difference!

[@Zilla17707]

What springs do u have installed ?

[@infernomaster2702]

I've tried finding a place like this close to where I live where I could go and use a lift, sadly can't find anywhere like that Makes that job of that soooooo much easier

[@negadiv6306]

This look clean ash, sense all v6 and 2.0 trims plus lt1 got the same front end it actually look good if you get the front lip and side skirts honestly even if you got the v6 or 2.0 honestly invest and get the SS hood

[@walterrezendes5716]

So the front air deflectors do not go back? Can they still be installed,informative video.

[@ViciousVickdunks]

nice i got a shock lt1 21 im about to add side and lip i already added a diffuser and spoiler -wicker bell and louvers the car looks amazing

[@secretm.5896]

But what about using pop rivets for the side skirts? Heard that's needed?

[@pedrohizzle2835]

Looks sick. Just bought Rapid Blue yesterday want to do this

[@GreenGamerBoi]

I own a 2019 1LT and tbh I’m not a fan of the front end there are times where I do like it but it’s the best looking I’ve been considering buying the RS/SS headlights to hopefully make it look better but it is pricey 😬

[@100aventador]

Yea I wouldn’t it’s too much and I don’t think it’s worth it

[@Ryan16328]

Does it need to be fastened by the sides too or is just bolting the bottom enough?

[@evancontos2267]

Nicest LT1 I've seen, have fun with it :-)

[@100aventador]

Thank you!

[@runawayslave1087]

The wind deflectors do go back on. It's designed for them to sit on top of

[@carlogal2657]

Regarding the sideskirts, is the tape strong enough to hold the sideskirts even after a year?

[@100aventador]

If you're referring to the 3M tape that came on the skirt, yes it is. But it's being helped by the bolts themselves

[@ericpalmer3664]

When do you actually remove the film to apply the 3m tape? Did you sick it on the Camaro first then screw it in or did you screw it in then remove the red film to apply the tape?

[@tonymuro2834]

When you put the double sided tape is it a one time thing that you have to line up or would it just get messed up.

[@100aventador]

It’s a one time thing

[@mrfld]

Nice video. Nice car.

[@100aventador]

Thank you!

[@ericpalmer3664]

Great video, looking to dress up my LT1 a bit as well. Where did you find that LT1 badge for the back of the car?

[@chingongtrz124]

Which exact kit did you buy? They have a few options

[@ryan9496]

tried installing my today but I had a small gap for the skirts what do you recommend to fix the gap?

[@100aventador]

Gap where?

[@ryan9496]

@@100aventador just along the whole side basically it doesn’t sit flush with the car

[@100aventador]

@@ryan9496 Try inserting more screws here the gap is, that align with the holes the side skirt comes with.

[@CristianSanchez-kj6xk]

Hey man, I just got this splitter for my 2019 Camaro RS. Are the rivets and drilling necessary? Like will it fall off if I don’t do that step?

[@jairomartinez6237]

I got the same questions what did you end up doing ?

[@whateverbrian]

This video just made me want to keep my 2022 LT1. I was thinking about trading it in but maybe I just need some parts. Which spoiler is that?

[@100aventador]

Factory GM carbon flash spoiler

[@isaiasnoriega7746]

Great job on the video brother !! Make me wanna buy a Camaró !! 👍🏽👍🏽

[@100aventador]

Thanks bro! I’ll sell you mine 😉

[@kiearcotton9452]

What rims do you have on your car

[@Alex-sm9mw]

Where did you get the fender hash sticker

[@dnegel9546]

The lt1 look so much more cooler then the SS. With this kit tho it makes it even better.

[@terminatorx6766]

Yup and newer too

[@PrinceNorth]

Pass me whatever u smoking

[@dnegel9546]

@@PrinceNorth dkn but the ss just looks like it's trying to hard to look aggressive. This just looks aggressive without trying to.

[@jonbin5984]

Can you send me the link to buy it, thanks

[@jairomartinez6237]

Question can you just use screws instead of rivets?

[@100aventador]

You can just make sure you’re using self tapping screens cause I don’t think the plastic body can keep regular screws in place since there’s no treads

[@InternalAffairs244]

The website says carbon flash metallic, is it metallic or gloss?

[@Muffin192213]

will this fit a LT1 ?

[@negadiv6306]

This is literally a lt1 in the video

[@terminatorx6766]

I don’t see how you don’t like the front end look more cooler than the past gen

[@youalreadyknow5039]

What tires do you have? I really like the treads. By the way, beautiful car!!!

[@gruiz5595]

what is the size of the rims and tires??

[@Moemaro_10]

Where you get them rims from ?

[@ryankirby6113]

What’s up bro . Is this the( primer black) or the carbon flash ( painted metallic black) finish for the splitter . Want to know because I have a SS looking to buy this splitter.

[@andrewbrown1087]

How long did you wait until you washed it again with the new installs?

[@100aventador]

The next day lol once they’re on they aren’t coming off. But if you use a wet method to install them, best let it sit without washing for 24-48 hoursb

[@andrewbrown1087]

@@100aventador okay, got ya. I have been putting off installing mine, I don't have a jack, that is the issue I have.

[@brandoncarpenter6385]

Where did you get the front side fender stickers from??

[@100aventador]

Got them from Chevrolet Accessories

[@JeLifeCoach]

Looks great brother. Congratulations. I love it. OE springs? You look lowered? Also - is that the NPP exhaust or did you go another way in the aftermarket? Blessings - JE

[@glasser620]

Why use Rivets on front splitter ?

[@Galaxy2ss_]

Extra insurance that it doesn’t fall off when you flooring the car lol

[@matthewneels8364]

Did your package come with rivets?

[@100aventador]

Came with screws and the rivers I got myself

[@johnsimpson7774]

I am getting ready to order from Extreme online but wanna ask is the front spoiler gloss black or carbon flash painted.? Great video Thanks

[@BrindlePitbull85]

looking good help me do mine lol

[@jimbreslin4210]

Great job Carlos! What size are your tires and rims?

[@100aventador]

They were 275/35 R20 up front and 305/30 R20 in the rear. Wheels I think they were 20x10 front and 20x11 rear

[@jimbreslin4210]

@@100aventador Thanks for the info. Carlos. Your’s is by far the nicest LT1 I’ve seen so far.

[@gregkendrick1874]

Looks nice but all them holes under the skirt looks bad.. Ouch. Thats what i dont want to happen so im thinking bout just taking mine to a pro...

[@100aventador]

Lol you should, but considering I didn’t car about something that wasn’t gonna be seen, I was fine by it

[@dandahl5964]

Lol are you crawling under the 3" clearance to see a few black screws?

[@jayr122001]

Nice

[@jking7573]

Where is the new car man? You have been talking about upgrading for a year what happened?

[@100aventador]

I did, lol I had a 4 cylinder and got a V8

[@dhanvi.lt1]

I actually like the lt1 front better than the ss

[@100aventador]

Thanks!

[@TheUndefeatedLegend]

damn i wish you didnt have to drill holes, was trying to avoid that

[@johnvanoostendorp]

Has anyone done this without a lift and can confirm it doesn't take 8 hours lol. I am considering this but am worried it will be a disaster on jacks

[@spencerrivera3623]

it shouldn’t really be an issue, try to have someone else do it with you

[@100aventador]

So just as long as u position the Jack on the thinnest part of the side skirt I don’t think it’ll be a problem. Because the only issue would be getting the side skirt over the Jack and the bolt up the side that isn’t covered by the Jack then move the jack

[@clownlivesmatter7925]

Bumper looks weird

[@gtaeditz3373]

The music is very sus

[@100aventador]

You’re very sus