Ezee-Riser Drum Riser - how to set it up

Video showing how to set up the Ezee-Riser drum riser, stage in under 5 minutes. www.ezee-riser.com

[@ledhed5717]

I bought his plans a few years ago and made one. I modified the size to make it more of a rectangle instead of square. I also routed the grooves just a little bigger for ease of it fitting together. It is very strong and I do not struggle at all putting it together. It is from a guy in the UK. Obviously he did his plans in metric which was fine with me. I bought a metric tape measure. I do recommend this riser. Have used it for just about every show when I have room. I would recommend it if he still has it.

[@mulletpower2009]

Do you still have those plans by any chance?

[@ledhed5717]

@@mulletpower2009 I believe so. Let me look for it and I’ll respond back.

[@bradricketts6091]

I am in the process of making a very similar drum riser. I think you will find that if you are to cut a slight angle at the entry and on each side of the slots the boards would mate far easier. I also cut my slots 1/32nd of an inch wider than the boards. I am using 1/2" Baltic Birch Plywood for my panels. My riser measures 84" wide X 64" deep from front to back. I also cut the front corners of the riser off at an angle. I found a place online where you can buy stage skirts 12" high which is the finished height of my riser. They wrap around the riser from back corner all the way around to the other back corner with velcro. Looking forward to seeing my completed.

[@kipwilson3771]

I made one of these in the 80's. Don't know why I didn't think to cut holes for handles. Lol I have since made a couple other designs and about to build a newer one I had an idea for. I may do a video for it. Nice job on this. I like the tapered ends too.

[@hauntedhose]

Listening to this music watching him struggle🤣

[@marksmith9181]

would it be possibly to get the plans and materials list for this project. Thanks

[@masterdplos2689]

Nice product! How can I get the plans for this project?

[@adeppisch]

Great looking product! Would you happen to sell plans/cut lists for those of us in Canada 🇨🇦 & willing to build our own? 😉

[@adeppisch]

Received plans & look forward to building my own. Thanks!

[@billster13]

how do i get plans for these?

[@Renegade3746]

Are the plans available online somewhere?

[@nmore69]

This Is of the most stressful things I’ve ever seen ! Love the idea though

[@shawnnovak1542]

Could you send a link for the plans? Thanks.

[@aceinthehandtv2805]

PLEASE EMAIL DAFISHER@MAILCOM HE IS THE ONE SELLING THE PLANS

[@jamesattrill1921]

Does anybody know what this process is called ? I mean the configuration? . I am looking to make some up for plastering ceilings

[@TheBoomBoomRoomStLouis]

What an amazing idea. Personally i call it the egg carton concept.

[@neilkendall5499]

Is this still for sale? The website link is dead.

[@mikeevans1952]

No sorry.

[@bcrash11]

Are the plans available?

[@wyecreekmusic]

Richard Chaddock plans available from [e-mail]

[@joelfifield5691]

wyecreekmusic Is that email supposed to be @gmail? Or @mail? I’d love to get those plans.

[@mikeevans1952]

No longer available. I will try to take it down if I can access the admin section of the channel

[@craigdrums]

There was a little bit of struggle when putting the pieces together, and for that reason, im out…

[@ledhed5717]

Router the grooves a little bigger. That’s what I did.

[@craigdrums]

@@ledhed5717 I found the perfect plastic pallets on marketplace for a seamless setup.

[@EarthtonesCymbals]

I hope he is the roadie? The drummer would be exhausted and would have to cancel the show.

[@ledhed5717]

Nonsense, I use mine almost every show. It goes up and tears down really easy. I did router my grooves just a tad bigger so they slip in and out easier.

[@EarthtonesCymbals]

It's your story...you can tell it however you want but the guy struggling in the actual video says it all. Cheers.@@ledhed5717

[@MrTwister3356]

Doesn't seem so 'Ezee'.