Origami Royal Rose Kusudama (Maria Sinayskaya)

[@EzOrigami]

I hope you enjoy this new tutorial! What would you like me to teach next? Tag photos of your Royal Rose Kusudama with #ezorigami to be featured in my next video! Check out my 6-unit Royal Rose Cube tutorial here: kzbin.info/www/bejne/joSZh6yth913sLs

[@leonellin3382]

Can this be made with 30 units?

[@15minutegaming32]

@@leonellin3382 Yes, this can be made with 30 units. However, now it will have an icosahedral instead of octahedral structure. You simply join 5 pyramids instead of four. I hope this answered your question This is a new gaming channel... Please subscribe

[@TiwazPagan-if3og]

I used 6x6 inch paper, 80GSM and it was not wanting to stay together very well, some parts did others just slipped right out. I think I'm going to implement using glue to help keep the pieces intact and bonded so it doesn't fall apart as I progressively assemble it.

[@leonardoruiz2793]

Any origami video you upload is so high quality, thank you. Definitely enjoy your work and advice.

[@vedanggore2406]

This tutorial is so on point!!!! Really love it!!! You've even included a folding tool in it. That saves so much time and makes the model more accurate!!!!!!!

[@torahdiva]

Thanks!

[@zhuzhu.viazhu]

Thank you Evan! A grate demonstration!❤❤❤👍👍👍

[@zoeysweetie1]

You are a fantastic teacher! Thank you for sharing.

[@lidiaeymann5484]

Bella! Gracias por el tutorial ❤

[@martingros8212]

it is so hard to find such a well explained tutorial, cheers!

[@krisCrashTV]

Good one! I like to use thick paper so my kusudamas aren't too wobbly, but I can't recommend it for this. The module is firm on its own, and it gets tricky to force things together. I've put a picture on insta for you.

[@sweetpain4742]

Again, good tutorial. Editing is awesome and you went by step by step!

[@EzOrigami]

Thanks a lot, I'm glad you like it!

[@sweetpain4742]

EzOrigami Not a problem, keep on folding!

[@АлёнаМаковецкая-е4е]

Why do you use the first three extra minutes for green paper for origami, if the red sheet can simple be divided into three parts and make an element for the kusudama?

[@SudinsCreation]

Thanks my Friend for sharing

[@rezboy9793]

thanks for showing the tutorial its awsome

[@EzOrigami]

You're very welcome. Thanks for checking it out!

[@juanguentenguea.gonzalez737]

thanks for the tutorial

[@ms-h7617]

Is this the same as The Imperial Rose by the same designer but 12 sheets not 30?

[@SlimeyBananas_]

This is so cool

[@youtubescroller2694]

#EzOragamiSquad Where you at?

[@mbby2k]

it can also be made into 30 unit proper kusudama

[@iomair1]

i think thicker paper is best because it took me soooo long to keep the units together so they dont unasemble

[@antonionocco2710]

Can it be made with 30 units?

[@andrewcain4686]

No idts

[@15minutegaming32]

@@andrewcain4686 , due to the similarity to sonobe, it is possible to make with 30 units

[@ann5376]

What’s the finished size of the ball?

[@princevora5138]

So cool

[@elim4245]

love it

[@zacharysakti2032]

Someone make a complilation of every time he says just like this Edit: yeah I'm not brave enough to make a tutorial so I shouldn't say negative things abt it.

[@MrSp0iler]

Relax, hes just shy. Still, good constructive criticism

[@krafttime129]

cool

[@riarulala3087]

Am I soooo bad at Kusudamas??? The difficulty is "low intermediate" and I could not link the modules. I tried and tried and tried and it did not work out. I used normal paper with a weight of 80 gsm. Totally impossible, the paper cannot stand the tension.

[@mbby2k]

yes you are horrendous at kusudama if you cant make a simple one

[@15minutegaming32]

@@mbby2k You should try simpler units earlier, such as the Sonobe unit and other simple units before attempting a low-intermediate model. I also strongly suggest that you first make the similar "Japanese Brocade," which has similar units, before you try this kusudama. The instructions are at bit.ly/2TKhMYA By the way, this is a new gaming channel. Please subscribe

[@justin-btsellendegeneresan5665]

riarulala 12 months later, but since you haven’t managed to connect them by themselves, you should use glue to connect them. That’s what the 6 pieces of the origami Medallion Kusudama require to be connected. I guess it’s cheating with this figure, but hey, if you can’t manage to connect without adhesive, do it with adhesive.

[@justin-btsellendegeneresan5665]

riaruala no, it has nothing to do with your skill. 💜 Plus low intermediate doesn’t mean easy so you wouldn’t be sooo bad at them anyway. 👍🏼 You should use an adhesive like glue for instance to help assemble it like how I’m feeling the need to do from my paper being thin. 😊 It would be a good idea for Evan to say in his video that thick paper is recommended as there’s KZbinr origamists who mention the recommend paper thickness at the beginning of their videos to help their viewers be capable of making whatever modular figure. 🙁

[@crystalmayo9393]

If a project needs 12 sheets of paper than its not EZORIGAMI eh? EH?