F.W. ARMS™ PrimeTime­™ Setup

Video setup of PrimeTime™ from F.W. Arms™

[@FWARMS]

PrimeTime™ has started shipping

[@chuckcullup1384]

I would like to share my experience with the PrimeTime by F.W Arms Unit. I purchased the PrimeTime unit to utilize the FW ARMS™ AUTO-CASE CENTERING DYNAMIC SPRING HOLD DOWN for both the swaging and priming process in conjunction with the CNC Shooters tool head. In my opinion, further research and development were needed for this product. FW Arms does provide some very helpful video instructions. However, these instructions do not include any information on the ratcheting mechanism for the Dillon 1050 Super reloading press with the PrimeTime unit. It appears that they still use this feature in some of their videos. FW Arms also includes a ratchet restriction tab with the PrimeTime unit. The PrimeTime shuttle arm seems to hit the primer slide stop, so the slide stop must be removed. The video instructions show you to turn the lever counterclockwise to adjust the primer drop. When this is done, the ratchet hits the primer slide. Despite several attempts at adjustments, I have not been able to make the ratchet work with the Primetime unit.

[@craigrussell1101]

Very well setup video! Another great F.W. Arms product.

[@FF1720]

I have a feeling I will be ordering 6 more after I get the one I ordered already…looks amazing!

[@jsimpson8018]

Curious about using this with a RL1100 and the DA3000 Dillon Auto drive unit. Any examples of that set-up?

[@FWARMS]

we run ours on a V3 ammobot. You should be fine on a RL1000