F350 ON 37'S NO LIFT

2016 F350 with no lift and 37x11.5 R 20
Tires are Nitto Trail Grappler M/T on stock wheels

[@erikjorgensen1134]

great information... I have a 2022 F-350 XLT and I am looking around for the biggest tires for my truck with no lift kit...thanks..

[@darrylm3627]

Good Stuff, Great Tips👍🏿😀 2016 F250 XLT 6.2L Flex Fuel 4W 4D (Stock)

[@joshuamentzos4436]

Thanks bro

[@FamousTetsuoGaming]

I have a 2019 f250 King Ranch 6.7. I Ordered Mickey Thompson Baja Boss A/T 37-12.50-20's and Ready Lift 2.5" Leveling Kit with billstein shocks. We will see how it goes. LOL

[@TheBigbry8]

Well?

[@brenthn]

I would like to see that!

[@ILC-eo6vk]

I want to put 35x12.5x20s on my stock 2014 wheels, so I assume they won't rub, either

[@brenthn]

I would think you should be fine.

[@paramountqualitycustomehom9775]

37x13.50x20 on stock wheels on 2018 f350 single wheel works all day long

[@johndelarosa8214]

They will fit, issue is how much stress will they put on the Ball Joints, Trans, and diff -

[@sonnylewis5880]

@@johndelarosa8214if your truck can’t turn a bigger tire without issues then just take it back and find something else bc it’s obviously not doing what a truck should be

[@steveyarnell2.o]

Interesting!

[@diggingupnorth3453]

so the answer is no.......they will not fit

[@hardway1746]

So no unless you level or lift the front.

[@michaelrainerii3547]

I'm gonna try a 4" on 37x13x50s. Should work I assume

[@brenthn]

I believe it would rub a little more

[@michaelrainerii3547]

@@brenthn Because of the position? I have 37s on my older 03 with a 4" lift. But I did have to slightly trim the bumper. At this point I'm willing to change the bumper or shave the plastic fender wall inside if necessary. I love the look. But I don't wanna cut the outside of the fender, so I'm gonna have to keep doing a little more research to be sure

[@brenthn]

@michaelrainerii3547 it's going to depends on your wheel offset where it's going to rub.

[@michaelrainerii3547]

@@brenthn Dang. Appreciate it. Looks like I'm gonna be doing more cutting smh lol

[@ChefBoyRLe_]

Any problems you ran into? i see the slight rubbing. Did you do any other trimming or anything?

[@brenthn]

No trimming. Yes it has rubbing on the radius arm. It also rubs the mudflap.

[@ILC-eo6vk]

@@brenthn How bad does it rub on that arm?

[@brenthn]

@@ILC-eo6vk It doesn't rub bad enough to cause any damage just rubbed the paint off.

[@ILC-eo6vk]

@@brenthn Would a 12.5 work?

[@brenthn]

@@ILC-eo6vk You could run a 12.5 but it would rub more and the side lugs of the tire might catch the radius arm making noise when you turn.

[@daleseagle1217]

How bad is the tire hitting on the inside? The video is a little dark to tell at full crank. Do you think a 3/8 inch spacer with the 11.50 wide tires will keep it from hitting?

[@brenthn]

Not bad at all. Slight rub on the radius arm. It's been 1 1/2 years now and no problems.

[@brenthn]

The problem with adding a spacer would be you are increasing the arc of the tire when you turn. So you will hit the bumper and fender instead of the radius arm.

[@daleseagle1217]

I have a 2 1/2 level lift on it and with the 11.50 tires figured with a spacer I would be at the same distance as 12.50 tires out and take care of not hitting the inside or outside on fenders/ bumper.

[@yukonstew5266]

Those did not fit.

[@915nortonstdt3]

Out of subject but where did you get your hat?

[@brenthn]

1776 united. They sell shirts and hats.

[@915nortonstdt3]

@@brenthn Thank you.

[@timowolf4745]

Is the truck leveled at all ?

[@brenthn]

Not at the time of the video. It is currently on a leveling kit.

[@baseballtank8015]

@@brenthndoes it rub now with the leveling kit

[@scotttaylor6179]

What mud flaps are they you have on the truck?

[@brenthn]

I am not sure of the brand. They where on the truck when I bought it.

[@lucassanto9565]

The stock tire size on a f350 is not 34.5 🤦🏻‍♂️

[@brenthn]

Sorry miss spoke, stock tire is a 34.1 inch tire. Stock tire size is 275/65r20.