AWESOME !!! I love it. One of the coolest I’ve seen
@ExpertPowerWash20 күн бұрын
This was a fun build. Thanks for watching!
@DanielKaledo Жыл бұрын
One of the Very few clean/professional fabricated rigs I have seen on you tube. All hoses run neatly, zip tied. Wiring run neatly, heat shrinked, zip tied. Professional ! Many rigs advertised by big time fabricators are not to this level. Many rigs shown have hosing and wiring with no for-thought. Looks like a bowl of spaghetti exploded!!!! Might relocate fuel cell for easier servicing. Splendid workmanship !!
@ExpertPowerWash Жыл бұрын
Wow, thanks!
@MrColinALewis5 ай бұрын
This is one of the nicest setups I've seen. It would be perfect for residential and commercial jobs. A few changes that I'd like to see have been mentioned. The gas tank needs to be moved and locking tool boxes installed. Maybe a Yeti cooler mounted somewhere for hydration. Additionally, I'd like to see a camlock banjo fitting on the H2O dump valve so a guy could unfurl a hose and direct dump water away from a job if needed. This setup is my long term goal. More near term I think your dual pressure washer 8' skid is my next purchase as business grows. Awesome attention to detail.
@ExpertPowerWash5 ай бұрын
Appreciate the comments! We did find a better location for the fuel tank after using it a while. Thanks again for watching!
@aceshigh235 Жыл бұрын
Very well done! My only question is why fuel in middle? It would be a huge pain to fuel. I suggest mounting under flatbed next to truck fuel intake in front of rear wheels. Easy access and saves room up top.
@ExpertPowerWash Жыл бұрын
Great suggestion! I’m going to mount boxes. This was a really tight build with only a 9 ft bed.
@cleanviewnj Жыл бұрын
Wow great setup hopefully you are doing well with it .
@simba92254 ай бұрын
Clean set up well done!
@ExpertPowerWash4 ай бұрын
Thanks!
@KentuckyWashPros Жыл бұрын
Well done friend, this is a extremely clean build and I like how you have optimized the space.
@ExpertPowerWash Жыл бұрын
Thank you!
@ziggymartinez227313 күн бұрын
nice af powerwash rig
@ExpertPowerWash12 күн бұрын
Thank you! This was a fun build
@powerfulimprovements Жыл бұрын
Sick! Nicely done
@ExpertPowerWash Жыл бұрын
Thank you!
@crystalclearwindowsllc Жыл бұрын
Very neat and well done the only thing I see is the 22 gallon gas mount , you have to climb up to fill but so done well
@ExpertPowerWash Жыл бұрын
That bugged me too but it will work. It does make it not as easy to get the gas and diesel mixed up.
@andrewshields9862 ай бұрын
Nice rig! Looking to do same build? My Questions are) Soft wash? 12v soft wash? Is that a custom flat bed? Ladder racks? Custom 8gpm machines? 525 fresh water tank? Thanks!
@ExpertPowerWash2 ай бұрын
All the info is here on the channel. I think I have three different videos on that truck. Everything was custom built in our build shop. We build these for other pressure washing companies. Here’s some more of our builds- pressurewashingskids.com
@77bweston6 ай бұрын
Clean set up my man 🤙🏿
@ExpertPowerWash5 ай бұрын
Appreciate it!
@DamonLocklary11 ай бұрын
I will like to know more about the rig on the flatbed truck i been looking for f450 4door with 12" flatbed for my pressure wash rig
@ExpertPowerWash11 ай бұрын
I may be interested in selling this one. Looking around and see if you find a better deal. I have build videos of this truck on my channel.
@vansage2691 Жыл бұрын
How does that dual feed to a tee not push water out the other side without a check valve? Nice rig.
@DouseAHouse Жыл бұрын
I was thinking about that too.
@ExpertPowerWash Жыл бұрын
It works but that’s a great idea. I may add that! Appreciate the comments.
@atlanticsoftwash Жыл бұрын
beautiful set up! My ideal would be F550 with full cab, 10' bed, 2x10gpm with igx800, 100 slim bleach, 300 slim water, 100slim RO/DI water, softwash gas system (comet p40), 10gpm hot box. did you all get the truck on auction through govt? and what is that valve you said for the dual feed water hose?
@ExpertPowerWash Жыл бұрын
It’s just a tee. This truck was bought off a private brush fire contractor. It was DOT inspected yearly.
@atlanticsoftwash Жыл бұрын
@@ExpertPowerWash oh, I got it... JOBE valve. yes those are great!
@davidweatherford6592 Жыл бұрын
Very nice 👍
@ExpertPowerWash Жыл бұрын
Thank you 👍
@allproexteriorservicesllc5338 Жыл бұрын
Great work Tim- 40K easily
@ExpertPowerWash Жыл бұрын
Thank you for commenting! Your guess is a lot south😂
@premierpowerwashing66348 ай бұрын
For the T on the jobe valve, what's stopping the water from flowing down through the other feed line. Do you have a check valve on the feed lines somewhere?
@ExpertPowerWash8 ай бұрын
Good eye. That’s been removed. Each hose has its own inlet
@premierpowerwashing66348 ай бұрын
@@ExpertPowerWash Thanks for the reply. Finishing up transferring from an 8ft skid to a flatbed by tomorrow. Plan on doing a ladder rack like you have on this. Anything you would do differently if you had to do it all over? Very clean setup as always.
@simplycleanpressurewashing758 Жыл бұрын
Beautiful work!
@ExpertPowerWash Жыл бұрын
Thank you very much!
@southeastsoftwash4020 Жыл бұрын
Nice bro!
@ExpertPowerWash Жыл бұрын
Thanks 🔥
@AquaForcePW6 ай бұрын
what pump do you use for your window cleaning set up?
@ExpertPowerWash6 ай бұрын
No pump currently. Testing some.
@AquaForcePW6 ай бұрын
Got cha! I really want to do a smaller version of this on my 1500 just an 8 and either 12v or gas
@anthonyfrank5430 Жыл бұрын
Is that 5/8 red hose on that 12" reel? Trying to decide if i need a 18" or 12" for 200ft 5/8 hose
@ExpertPowerWash Жыл бұрын
It’s 1/2 on a 12” reel
@sprytnaexteriorcleaning6163 Жыл бұрын
How much does your commercial license plate and stick cost in your area?
@ExpertPowerWash Жыл бұрын
I don’t know yet
@kostadinospehlivanis9935 ай бұрын
What is the width of the bed
@ExpertPowerWash5 ай бұрын
Think 8 ft
@justinmeyers4764 Жыл бұрын
Nicely done
@ExpertPowerWash Жыл бұрын
Thanks!
@pashagold Жыл бұрын
Now you need to slap some tool boxes under that bed.
@ExpertPowerWash Жыл бұрын
That’s phase 2. It’s in the plans
@RenewPowerCleanLLC5 ай бұрын
My guess is $80-85k
@juanlopez3501 Жыл бұрын
Super sweet ass setup.
@ExpertPowerWash Жыл бұрын
Thank you
@cliff7634 Жыл бұрын
why guess on cost? just tell us what it costs.
@ExpertPowerWash Жыл бұрын
I believe I did answer this in the comments👍
@allcleanpressurewashingllc1704 Жыл бұрын
Perfect!! 60-65k
@ExpertPowerWash Жыл бұрын
Go a little more north.
@allcleanpressurewashingllc1704 Жыл бұрын
@@ExpertPowerWash 70-75k
@RRMM77 Жыл бұрын
80k
@ExpertPowerWash Жыл бұрын
Pretty close!
@TakinBumpsNBlownScales Жыл бұрын
Looks like an old odot rig
@ExpertPowerWash Жыл бұрын
Someone said that that other day. It’s a brush fire truck used in wild land fires.
@TakinBumpsNBlownScales Жыл бұрын
@ExpertPowerWash that makes since, looked familiar