FACTORY 47 HANDLEBAR INSTALL

[@almohandskhaild]

Thank you for sharing installation video. Do I need to purchasing the extension wires or cables if I want it the heated grips. I have stock handlebars

[@Switch_N_Gears]

I can’t speak on that cause mine does not have heated grips. But from what I understand all stock cables should work up to 14 inches with these bars. My honest opinion I would buy the extensions and if you don’t need them, send them back and get your money back.

[@almohandskhaild]

@@Switch_N_Gears thank you for reply I just talked with company and they confirm that the 14 inch no need more extension wire or cables. If you want heated grips you need only extension wire price for extension is 18 bucks that’s it.

[@Switch_N_Gears]

@@almohandskhaild There you go! Get them on man!

[@caseyrobinson5574]

Great video sir an them bars look good

[@Switch_N_Gears]

Thank you Sir, more info on them in a video to follow, love the look! Gives it a more sinister look I think, which is what I want!

[@jpb-go8qh]

Did you come across 2 small 2 pin connectors that dont connect to anything? 1 has a blank connector plugged into it.

[@Switch_N_Gears]

If you have Instagram, send me a message with a picture and hopefully I can help you.

[@jpb-go8qh]

Found out these are for heated grips. I'm good now. Thought I missed something!

[@Switch_N_Gears]

Glad you were able to figure it out!

[@jpb-go8qh]

Thanks for your reply! Installing the F47 Miter bar.

[@Switch_N_Gears]

@jpb-go8qh right on 🤘🏼

[@DDAVO7]

Nice job and they look great! Did you get them pre-wired?

[@Switch_N_Gears]

Thank you! I did get them pre-wired and I haven’t made a review video on it yet but if you’re thinking about getting them pre-wired I wouldn’t based off of my experience!

[@guyonabuffalo2391]

@@Switch_N_Gearswhy do you not recommend pre wired? Also, is it necessary to get the $200 upgrade kit with ABS? I want to put 14” meat hooks on my 21 street glide special with stock wiring.

[@Switch_N_Gears]

I’ll have a video about it in the future, but long story short; I had a used/broken throttle by wire they put in it….id need a little more information to fully answer that, if you have instagram feel free to message me. When I bought these bars, I did not need an “upgraded ABS kit” I used all stock wires like shown in the video, and works great for me!

[@abefroman2091]

I have a 2024 Rode Glide Limited. i just order 14" bars from Harley and they swear I don't need any extra cables. Is this true?

[@Switch_N_Gears]

@@abefroman2091 On my 23 RGS, I did not need extra cables.

[@jaylopez2496]

That looks good. What grips do u have on there?

[@Switch_N_Gears]

Thank you! ODI HART LUCK lock on grips!

[@chasingexcellence2246]

How did you get the clutch cable loose enough to work. I did mine and it is hella tight.

[@Switch_N_Gears]

Have you disconnected it from the little “clip” kinda near the headtube? Easy to see if you turn the bars all the way to the left.

[@chasingexcellence2246]

@@Switch_N_Gears I only cut the zip tie at the top? Do you have to break that clip or does it just come out?

[@Switch_N_Gears]

@@chasingexcellence2246 You just unhook it from the clip, should give you a little more length.

[@chasingexcellence2246]

@@Switch_N_Gears thank you

[@Switch_N_Gears]

@@chasingexcellence2246hope that works for you. Thanks for watching

[@cgasu0311]

Hi, I was hoping to do the same thing to my 22 RG Limited. I didn't hear you mention if you had heated grips. Do you? If so, I assume Plug and Play. Also, did F-47 pre-wire your handlebars?

[@Switch_N_Gears]

No but it’s plug and play, if you got them. I got mine prewired but I would not suggest getting them prewired I had an issue with them

[@cgasu0311]

@@Switch_N_Gears Thank for the heads up on the Pre-wire. I thought that would be great at the end of the day the kits they sell today make pre-wiring a breeze. The concern I had was the throttle and the brake cables. I have a 22 RG Limited, so I will pre-wire everything (including heated grips) and change out the bars when I get some free time. Thanks again👍

[@Switch_N_Gears]

@@cgasu0311 my issue with the pre-wired bars was they put an old rusty, looking throttle by wire set up in there. And it wouldn’t let the bike run, right

[@cgasu0311]

@@Switch_N_Gears No, that is not cool, and definitely a valid concern

[@Recycledhooligan]

I think they call those meat hooks.anyway they look good & they’re not chrome.

[@KeithHuntsman-TaFl]

Yeah that term I just learned 🍖 🪝

[@Switch_N_Gears]

@Recycledhooligan you know it , all black and red, just a little hint of chrome! They give it a sinister look, which is what I’m going for!

[@Switch_N_Gears]

Meat on a hook, sure do love fresh caught fish! @keithhuntsman9455