Love, love, love ❤️..... super sweet demonstration .... Thank you 🙏
@fambamny3 жыл бұрын
Thank you so much Janet.
@MariaNyceDesigns2 жыл бұрын
OH MY GOODNESS, THIS IS SO EXCITING!!! I HAVE TO TRY THIS, THANK YOU THANK YOU THANK YOU!!! HUGS!!!
@fambamny2 жыл бұрын
You’re very welcome and Thanks so much also Maria for watching a lot of our videos. We really appreciate it.
@luzvega96852 жыл бұрын
Me encanto este video!!!! Flores perfectas!!!! Gracias por enseñarnos ♥️
@fambamny2 жыл бұрын
De nada Luz y muchas gracias también por el apoyo a nuestro canal.
@renukanair975410 ай бұрын
Thank you for sharing. Such an easy explaination. You're great. Thank you for sharing.
@fambamny10 ай бұрын
You are so welcome Renuka and thank you so much also for the support.
@donnadonaldson5353 жыл бұрын
Oh Thanks so much FamBam I'm not even good at distortion. But this was good for me.
@fambamny3 жыл бұрын
Thank you Donna Donaldson.
@lucilacardona43912 жыл бұрын
FamBam NY: My admiration and respects for you and your wonderful talent 😉!!!
@fambamny2 жыл бұрын
Thank you so much LUCILA. It means a lot.
@bedtimestoryreadaloudwithm45663 жыл бұрын
Those are so vibrant and beautiful! What a nice addition to any balloon masterpiece
@fambamny3 жыл бұрын
Thank you sis
@youtubechannelsergul3784 Жыл бұрын
Beautiful ballon flower ❤ Thanks 😍
@fambamny Жыл бұрын
Thank you so much :)
@veey92743 жыл бұрын
Love this! So beautifully creative!🥰
@fambamny3 жыл бұрын
Thank you so much Vee :)
@meganee02 Жыл бұрын
Same I have tried so many times I still can't do it...
@IRA10203 ай бұрын
Wow! Ang galing nyo! That’s amazing!
@fambamny3 ай бұрын
Thank you Irene
@sarahstrand6136 Жыл бұрын
THANK YOU SO MUCH for making this video. It was incredibly helpful not to mention 100% clear, concise & straight to the point. Listing of materials in both languages was just the cherry on top. I went through tons of pages before stumbling across yours & I was relieved that the video wasn’t forever long & direct. A lot of others are sneaky with their wording like they don’t want you to truly know how to make the decorations or balloon item lol (it’s hard to explain) so they will only tell you how to do it in a manner that will work out if you purchase specific supplies, via THEIR own store or whatever…. Naturally. I understand wanting to promote your place but when they go on & on & on forever talking in circles and then leave you without a list of materials that you can get elsewhere or even sometimes just the dang sizes of the balloons it’s a tactic that makes me want to buy anything from their store so much less. It feels greedy desperate & kind of deceptive at times. Especially when the title says free diy tutorial or something. Like… alright dude, on a technicality I guess. But then there are wonderful other people out there like this guy who save my derrière around my daughter’s bday !! 🫶🙏😮💨🥳 so GOD BLESS YOU man. Ugh I am so stoked right now!! Tysm
@fambamny Жыл бұрын
Hello Sarah, You're welcome and we are so humbled and speechless reading your wonderful comment about us. It really means a lot. Thank you so much and thank you also for your support to our channel. Advance Happy Birthday to your daughter. Have a great day.
@yenisdelarosa90912 жыл бұрын
Amezing job, beautiful flowers. Thank you for share..👍👍👍🙏🙏
@fambamny2 жыл бұрын
Thank you too for watching. Have a nice day.
@Anonymous-zv4kg3 жыл бұрын
These are very pretty to add to a Garland.. very nice💜💜
@fambamny3 жыл бұрын
Thank you so much.
@christinabarrow58143 жыл бұрын
They are beautiful. keep up the great work you're doing
@fambamny3 жыл бұрын
Thank you so much Christina. We appreciate your support.
@henrydanielvelasquezlopez12693 жыл бұрын
Como siempre, las flores lindas y elegantes... eso si que paciencias, la verdad
@fambamny3 жыл бұрын
Muchas Gracias Henry Daniel.
@henrydanielvelasquezlopez12693 жыл бұрын
@@fambamny :3
@goddess8172 ай бұрын
Love it
@fambamny2 ай бұрын
Thanks so much Goddess
@magagdaga706 Жыл бұрын
You are amazing! Thanks FOR this video
@fambamny Жыл бұрын
You're so welcome Magagdaga and Thank you also for the support.
@crafttees88872 жыл бұрын
Looks very nice and easy to do
@fambamny2 жыл бұрын
Thank you Craft Tee's.
@meecha7154 Жыл бұрын
Love it
@fambamny Жыл бұрын
Thank you so much Mee Cha.
@yeseniac.77733 жыл бұрын
Masterpiece!!!! 🥰👍👏👏👏👏
@fambamny3 жыл бұрын
Thank you very much!
@yennygdesign3 ай бұрын
Thanks!
@fambamny3 ай бұрын
Thank you so much @yennygdesign We really appreciate it. Have a blessed day.
@bawatbuhaymaykwento513 жыл бұрын
Ka pretty ba. Look diamond ang naa sa tunga. Hehe cute kaayo.
@fambamny3 жыл бұрын
Thanks sis
@Byola_Partyheaven3 жыл бұрын
Beautiful flowers 💐😍.
@fambamny3 жыл бұрын
Thank you so much 🙂
@IllHandleThis4 ай бұрын
I’m doing by mouth 😂😂 so I think this all is a little too advanced for me. But great job and nice tutorial!!
@fambamny4 ай бұрын
Thanks so much :)
@NellaVIDEOS3 жыл бұрын
Pagka pretty..easy r kaau ky bro cheland
@fambamny3 жыл бұрын
hehehe. Thanks sis. Sauna sis maglisod sab siya ani until sige lang practice na kuha ra tawon niya..hehehe
@annbasha61083 жыл бұрын
I learned a lot from you thank you
@fambamny3 жыл бұрын
You are so welcome and Thanks so much for the support.
@user-zl2cv4rw7p7 ай бұрын
He explained so well yet i didn't understand not even with the video so I for some reason ended in the north of texas instead of making a petal balloon, this is so confusing just like math used to be for me .. 😢😢
@fambamny7 ай бұрын
Hello Liz G-M, sorry to hear about that. But if you have questions regarding balloons please let us know. Thank you.
@jarednegosa60693 жыл бұрын
So beautiful! 😍
@fambamny3 жыл бұрын
Thank you so much.
@persidacontreras700 Жыл бұрын
❤❤❤❤Thank you!
@fambamny Жыл бұрын
You're welcome Persida and Thank you too.
@sylviaecklund876623 күн бұрын
Amazing!!
@fambamny22 күн бұрын
Thank you so much.
@corneliomiel24572 жыл бұрын
Nice and wonderful flower balloons creation,i love it i'm your 1 of your subcriber
@fambamny2 жыл бұрын
Thank you so much 😀
@9xXxkailaxXx67 ай бұрын
Any advice for why my 260q bends horribly when I let go of the air of the bigger balloon ? It doesn’t want to turn into a pedal for anything 😢
@fambamny7 ай бұрын
Hello K A Y B O N I T A, pls. make sure that your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Please try it again and don’t give up. Once you figure this out it’ll be easy for you. Thank you so much for watching our video.
@rosetunui56562 жыл бұрын
Awesome n very creative 👏👏❤️❤️
@fambamny2 жыл бұрын
Thank you so much 😊
@veehazan47882 жыл бұрын
These are amazing!
@fambamny2 жыл бұрын
Thanks so much Vered.
@tigist2272 Жыл бұрын
Great job ❤️
@fambamny Жыл бұрын
Thank you so much Tigist.
@newdecorationKing372 жыл бұрын
Good very very very nice
@fambamny2 жыл бұрын
Many many thanks
@sumeyyekocak20713 ай бұрын
Sıcak silokon sürünce balonlar patlamıyor Soğuk silikonmu kullanıyorsunuz
I ordered balloons and ready to give this a try, but on a side note I would die if I saw my hubby using a glue gun over my carpet 😂😂😂.
@fambamny3 ай бұрын
lol.... that's funny. :) anyways, thanks for watching our video. Have a nice day.
@TiffanySotolife2 жыл бұрын
I love this!
@fambamny2 жыл бұрын
Thanks so much Tiffany :)
@JudithHernandez-uc6si Жыл бұрын
I have a hard time making thesa flowers. The outside balloon crushes the inside one.. I'm wondering does it have to do with the size of the round balloon?
@fambamny Жыл бұрын
Hello Judith, may we know if what size was the round balloon that you used? Thanks.
@serenityvincent24256 ай бұрын
No idea how he's doing that, can't see the opening of the balloon while he's filming
@GladysOsma Жыл бұрын
Hola buenas tardes Tengo una pregunta el pegamento es silicona caliente ?
@fambamny Жыл бұрын
Hola Gladys, esa es una pistola de pegamento de doble temperatura y se enfrió. Gracias.
@michaelhernandez30546 ай бұрын
After the last time you blow up the 5 inch how do you keep the air from coming out?
@fambamny5 ай бұрын
Hello Michael, sorry for the late reply, hold both nozzle while pumping the 260 balloon. Air might come out a little bit but that's fine, you can always add little air if needed. Thank you.
@user-hw8me6yz3r Жыл бұрын
Большое спасибо😘!
@fambamny Жыл бұрын
Пожалуйста, и спасибо вам также
@jogatehouse231 Жыл бұрын
Brilhante 😮❤
@fambamny Жыл бұрын
muito obrigado jo
@yeseniacepeda2941 Жыл бұрын
Do I have to get qualatex for the 260 balloons also .. so it can give me that effect.. I can't get that effect.
@fambamny Жыл бұрын
Hello yesenia, you don't have to but Qualatex are also a great quality so it is better. Thank you.
@annmeadows15817 ай бұрын
Do the 260 inside do you inflate it or the 5 inch I’m confused
@fambamny7 ай бұрын
Hello Ann, it's the 5 inch balloon first then followed by the 260 balloon which you inflate also. Thank you.
@gloriayah6893 жыл бұрын
Wow! Is there anything you can't do...Very creative and it looks awesome. Of course I subscribed. It's just Great artwork.
@fambamny3 жыл бұрын
Thank you so much Gloria and Thanks for the support.
@munaihsan2 ай бұрын
I surprise , how using glue gun did not burst the balloon?
@fambamny2 ай бұрын
We use a low temperature glue gun. Thank you.
@EatBalloonFlowerLifestyle Жыл бұрын
Hi, thanks for your video, i have learned so much skill watching your video. I’m trying to look for low temperature glue gun but not able to find in Malaysia. Can u send me link if can get in Amazon? Wondering if the plug can use here too.
@fambamny Жыл бұрын
Hello, this the link in Amazon (this is not the exactly the same as what we use but this is also a dual temp glue gun) - amzn.to/3i6L055 But honestly, with this glue gun I am not sure if this is okay to plug (or use) in Malaysia since we have different voltage here in the US. But just to be safe, I don't recommend you buying this and use it in your country just for safety reason. It will be better if you get it from your country (hopefully if there is one). Thanks again so much.
@EatBalloonFlowerLifestyle Жыл бұрын
@@fambamny appreciate your thoughtful response and kindness. I make the huge number bouquet (standee) sometimes the foil or latex won’t stick strong together with balloon dots tape unless use modelling balloon.
@arakashmirganio2 жыл бұрын
Amazing! ❤️
@fambamny2 жыл бұрын
Thank you so much Ara Ganio :)
@Pinky-cp1wl2 жыл бұрын
Amazing
@fambamny2 жыл бұрын
Thanks so much Pinky.
@designingandcreatingwithbw97943 жыл бұрын
Awesome
@fambamny3 жыл бұрын
Thanks so much.
@suzetteacosta34822 жыл бұрын
What brand is the chrome balloon?
@fambamny2 жыл бұрын
Hello Suzette, for this project I think we use the one from Amazon but I think they are out of stock for this kind. Qualatex is great too if you want. Thank you.
@yeseniatorres8786 Жыл бұрын
Is that a normal glue gun?
@fambamny Жыл бұрын
Hello Yesenia, we use dual temp glue gun and set it to low temp. Thank you.
@gildaorozco98792 жыл бұрын
Hi. What kind of balloons do you use? The regular ones or the flex ones? I tried the regular 260 and they don't work, not flexible.thanks
@fambamny2 жыл бұрын
Hello Gilda, we use different brands in 260Q or we call it modelling balloons. 260Q is from Qualatex (a great quality) but we also use those from Amazon or the one we have in our Ebay store. Thank you.
@ofranco71488 ай бұрын
How far in advance of event can you make these?
@fambamny7 ай бұрын
Hello, for a Balloon flower projects (balloon distortion) we usually do our best to make it as close to the event as possible, cause if we will do it ahead of time it's not good since it will easily get deformed esp. the shape of the petal (because of the 260 balloon inside that sometimes will pop. So we usually do it on the same day if we can or if we can't then we will do it the night before but there's a possibility that it get's deformed. Thank you.
@riddhirajput2192 жыл бұрын
My petal is not taking shape as urs , any suggestions about it pls
@fambamny2 жыл бұрын
Hello Riddhi, The trick is, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 5 or 7 inches Balloon. You will then inflate your 5 or 7 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 5 or 7 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Please try it again and don’t give up. Once you figure this out it’ll be easy for you. I know you can do this. Have fun and please let me know if you have any question. Thank you so much for watching our video and have a nice day. I hope this is clear to you , please let us know if you have any question, thank you and have a wonderful day.
@seneidalantigua3626 Жыл бұрын
Hermoso
@fambamny Жыл бұрын
Muchas Gracias Seneida :)
@lovelvs223 жыл бұрын
Hi this is nice. what if i dont have a dual temperature glue gun? can i use glue dots instead?
@fambamny3 жыл бұрын
Hello Lovely, yes it's okay to use glue dots. Just put more to make sure that it's sturdy. Thanks.
@hannahelizabeththomas92673 жыл бұрын
It never works for me when I try and do it lol
@mayreninovagarcia62303 жыл бұрын
make 2 of us
@mscharles93ify3 жыл бұрын
I’m with you guys, smh
@fambamny3 жыл бұрын
Hello Hannah, just keep on trying. I was like that too when I first started making petals. Just keep on practicing.
@fambamny3 жыл бұрын
Hello Mayreni, When I started making this flower balloon I also had hard time making it :). I wasted a lot of balloons... lol
@fambamny3 жыл бұрын
Just keep on trying Ashland, hopefully you can do it soon. I am like that too when I started making this balloon flowers.
@pauladelimapaulino8220 Жыл бұрын
😍😍😍😍😍💯
@fambamny Жыл бұрын
Thanks so much Paula
@jilljones9813 Жыл бұрын
Would you mind providing information or the link for the low temp glue gun you are using?
@fambamny Жыл бұрын
Hello Jill, here's the link (from Target) - www.target.com/p/elmer-39-s-craft-bond-full-size-glue-gun-dual-temp/-/A-51605448#lnk=sametab
@jilljones9813 Жыл бұрын
@@fambamny thanks so much!
@WowTZ2 жыл бұрын
What type of balloons are these
@fambamny2 жыл бұрын
I think this is Qualatex. Thank you.
@louellamurillo24323 жыл бұрын
Can you use adhesive instead of the glue gun?
@fambamny3 жыл бұрын
Hello Louella, yes you can. That's what I also used before. Thanks.
@DeniseSamano Жыл бұрын
Why does my 260 fold inside? Completely closed! When its blown up
@fambamny Жыл бұрын
Hello Denise, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260 until you’ll see that both ends of your 260 protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260 until it resists, in that way it won’t be too soft. Remember if your 260 is too soft it can easily get deformed. I hope this will help you. Thank you and have a nice day.
@littlemissaccountant8683 жыл бұрын
hello sir does the normal glue stick for hot glue gun can also be used in low temp glue gun?
@fambamny3 жыл бұрын
Hello Mary Joy, sorry but I honestly don't know because I always use the glue stick for the dual temp. But you can try maybe it will work. Thank you.
@littlemissaccountant8683 жыл бұрын
@@fambamny thanks always for your reply sir!
@dejavuproductions25932 жыл бұрын
When I deflate my balloon they won’t keep the petal shape why is that?
@fambamny2 жыл бұрын
Hello Dejavu, I know exactly what you mean, that happened to me way back when. The trick is, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 5 or 7 inches Balloon. You will then inflate your 5 or 7 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 5 or 7 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Please try it again and don’t give up. Once you figure this out it’ll be easy for you. I know you can do this. Have fun and please let me know if you have any question. Thank you so much for watching our video and have a nice day.
@smarie90982 жыл бұрын
This was happening to me too
@notyour0815b2 жыл бұрын
What type / brand of ballons are you using..? mine are not that good quality so they pop 😏
@fambamny2 жыл бұрын
Hello nala, we use different kinds/brands of balloons. I think in this project we use Qualatex. But sometimes we also use generic brands that are also good. Thank you.
@shyrlee84442 жыл бұрын
I'm trying this but I can't make it perfectly how how how? Im using a glossy 260Q
@fambamny2 жыл бұрын
Hello shyr, since I am using a smaller latex balloon, instead of using the whole 260Q inside the latex balloon, cut it into half and you can use the other half as well. Thank you.
@celinesgomez6209 Жыл бұрын
What kind of balloons you use qualatex
@fambamny Жыл бұрын
Hello Celines, we use different brands of Balloons but for this project I think it's Qualatex and it's one of our favorite too. Thank you.
@celinesgomez6209 Жыл бұрын
@@fambamny thank you You did a great job with the balloons
@fambamny Жыл бұрын
@@celinesgomez6209 thank you so much.
@christinamartinez63614 ай бұрын
Mine keep folding and do not keep the shape I do not know what I'm doing wrong
@fambamny4 ай бұрын
Hello Christina, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 5 inches Balloon. You will then inflate your 5 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 5 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Thank you and have a nice day.
@soriescobar21582 жыл бұрын
❤❤❤❤
@fambamny2 жыл бұрын
Thank you SORI.
@mariacompagnone31333 жыл бұрын
It is possible do the petals with Double stuffed balloon?
@fambamny3 жыл бұрын
Hello Maria. I will ask Cheland later to answer your question as soon as he gets home from work. Thanks (Aileen)
@fambamny3 жыл бұрын
Hello Maria Compagnone, This is Cheland, my wife Aileen told me about your question. To be honest with you, I have not tried making petals using double stuffed balloon before. I would think it'll be too hard for your 260q balloon to handle and it could easily get deform. But it's worth a try, you can always try it with just one petal to see if it works or not. I hope it'll work in that way you can really get the right color of flowers you wanted. Thank you.
@mariacompagnone31333 жыл бұрын
Thank you so much . I’ll give it a try
@fambamny3 жыл бұрын
@@mariacompagnone3133 you're welcome.
@lionhartdragon5312 жыл бұрын
What glue did u use? Thanks
@fambamny2 жыл бұрын
Hello Lionhart, for the glue, we use the dual Temp glue Gun set to low. The brand is Elmer’s dual Temp glue gun. Thank you.
@suzannesteinberg67563 жыл бұрын
How big is the finished flower or each petal?
@fambamny3 жыл бұрын
Hello Suzanne, the size of the finished flower (each petal) is around 5 to 6 inches. Thank you :)
@silvermom22902 жыл бұрын
Where do you buy the little stick?
@fambamny2 жыл бұрын
Hello Silver Mom, the little stick is mostly from a foil balloon like those numbers or letters or those huge foil balloons with designs (it comes with it already). I honestly don't know where to get something that is just the stick alone. But maybe you can do an alternative to it like a balloon stick . Thank you.
@isabelcristinabravo68643 жыл бұрын
😍😍😍
@fambamny3 жыл бұрын
Thank you.
@marisolestrella25152 жыл бұрын
i like to how to in box you i need some extra info if you can
@fambamny2 жыл бұрын
Hello Marisol, you can message us through Instagram (FamBam NY). Thank you.
@krupalumagicshop82873 жыл бұрын
very 👌
@fambamny3 жыл бұрын
Thanks so much.
@myrarobinson54333 жыл бұрын
this was very nice but a little too fast
@fambamny3 жыл бұрын
Hello Myra, sorry about that, Thank you for letting us know and Thank you also for watching.
@mamedova98124 ай бұрын
Почему именно хром?
@fambamny4 ай бұрын
Здравствуйте, вы также можете использовать обычный латексный шар, мы также используем его с нашими цветочными шарами. Иногда мы избегаем обычного прозрачного латекса, поэтому мы также любим использовать хром, поскольку он непрозрачен. Спасибо.
@user-wp9vf8kx1h2 жыл бұрын
Great idea. But the camera coverage is not very clear. Disappointed:(.
@fambamny2 жыл бұрын
Thank you for the feedback.
@lakedrajohnson-bogart71052 жыл бұрын
Do you offer classes?
@fambamny2 жыл бұрын
Hello LaKedra, sorry but I don't. Thanks so much for watching and for the support.
@lakedrajohnson-bogart71052 жыл бұрын
@@fambamny well if you ever start please add me to a list because I would pay to come.. your work is great
@fambamny2 жыл бұрын
@@lakedrajohnson-bogart7105 Thank you :)
@kiribrown2932 жыл бұрын
I sent you a message on Instagram, do you have access to your inbox on there? It’s a question about you trying something? X
@fambamny2 жыл бұрын
Hello Kiri. We just message you there. Thanks.
@yettyclesia5 ай бұрын
This is not as simple as it looks, my hands hurt
@fambamny5 ай бұрын
Hello Yetunde, yeah this project needs more time and practice, once you figure it out, it will be fine. Thank you.
@AnnLippert12 жыл бұрын
oh hell no!
@mskjohnson85 Жыл бұрын
😂😂😂
@mollygomes24643 жыл бұрын
Beautiful
@fambamny3 жыл бұрын
Thank you Molly
@sueguidry421611 ай бұрын
Love it
@fambamny11 ай бұрын
Thank you Sue Guidry 😊
@valariewestbrooks1614 Жыл бұрын
What brand of balloons do you use?
@fambamny Жыл бұрын
Hello Valarie. I think it is qualatex for this project. Thanks so much,
@WowTZ2 жыл бұрын
What brand balloon is this?
@fambamny2 жыл бұрын
Hello t____cole, I think it's Qualatex. Thank you.