Fanatec CSL Elite Pedals LC Video Guide

[@KrisTiasMusic]

Lol, three years of weekly use and I just now realized that I can change the LC brake responsiveness on the fly. Thanks for the tip!

[@BMLDrift]

Dude 🙈🙈

[@sirnikolas]

You can also connect directly to the Loadcell kit and fine tune it even more.

[@BMLDrift]

Awesome soundrack guys 👌 and the invertet solution is mint. Never came to my mind doing this 🤯🤯

[@DingbatToast]

I tried them inverted and found the brake bite very inconsistent. The way the pressure sensor is positioned means it doesn't always get the same pressure sensation when the pedal is pressed away from the base (as is the case when inverted)

[@DingbatToast]

For anyone thinkinh of inverting the pedals with a loadcell. I tried them inverted and found the brake bite very inconsistent. The way the pressure sensor is positioned means it doesn't always get the same pressure sensation when the pedal is pressed away from the base (as is the case when inverted) The slightest repositioning of your heel or toe gives a different braking result. I changed back pretty quickly. Other than that... LC is an awesome addition to the pedal set

[@OnTheGrid]

I’m sure many will be happy to see this video. 👍

[@brodeur212]

hope there is some new products for christmas

[@Darksagan]

Very easy to follow and nice music.

[@droors77]

Best pedals on the market at this price. Wish I still had mine as the top range v3i i replaced them with are kind of falling apart..... I would rather buy these then deal with fanatec support.

[@kelmo1989]

I hope When mine arrives, the brake can be made as solid as possible and the adjustment is done on the wheel. My current brake pedal only moves by 4mm and I am very consistent with it. That foam piece looks like it needs binning.

[@OugaBoogaShockwave]

so when do i get a test version to try out ? 😁😁😁 i like the design, looks industrial with minimalist styling.

[@andyvecchiarelli2998]

BRF 10 looks real

[@GTexperience_Channel]

so is there going to be a new elite pedal load cell, like: csl elite pedals LC? cause I would still really love a load cell pedal for the elite.

[@pablocabezas1265]

hi. i have this brake pedals. How i have to configure the system to do tale braking??

[@cillafer7952]

Where do u buy the load cell upgrade?

[@rikkejensen8411]

hi can i used these pedals with my trustmaster wheel in assetto corsa compitizione and thanks for a good rewiew

[@simr7758]

Yes

[@TheCsb1996]

I'm about to buy some used csl pedals to go with my t300rs base, everything gone okay with it ?

[@onerol4667]

Did you try ? and does it works ?

[@TheCsb1996]

@@onerol4667 yeah spot on just used a USB

[@onerol4667]

@@TheCsb1996 thanks bro

[@H4nn1baL3]

I have two questions if anyone can help me. First , is everything in the package to help you secure and stabilize the pedals? And second, can you save the old brake pedal to use as a throttle in the future? Thanks to anyone who can answer this.

[@DingbatToast]

Everything is in the box to mount the loadcell pedal to the fanatec pedal baseplate. Screws to mount the pedals to your rig are not included. Yes the old brake pedal can be used as either a clutch or accelerator. The spring pressure is slightly more so if you want it as a spare accelerator you can easily swap the spring from the old throttle pedal when you need it.

[@123mosiang]

Nice BF teaser 😏

[@ddmvgaming932]

Hmm I don't have BRF is that because I have connected with USB ?

[@BTouch454]

Does rearranging the back of the pedal make you brake faster, slow, stop the car quicker??

[@__ende8414]

Good question!

[@matteostaffa9300]

It’s just a stiffness preference, you can adjust the actual force needed to apply full brake in the wheel base settings

[@iemv8900]

Will Fanatec do a Black Friday deal? If so what percent off?

[@11puig]

If they do like past years, just expect new stuff not in discount and only 10% off from pedals or wheel rims.

[@joshpeets3951]

Black Friday I ordered a CSL Elite Wheel, CSL Elite Pedals, and ClubSport shifter. Only saved around $80 though... looks like there aren't ever any big savings.

[@isaacbenzaquen2944]

If I have the same aluminum profile size of the min 4:08 which size of bolts are needed?

[@sparksk8er]

at 3:09 the little O shaped plastic bit that goes inside that last washer fell off and now will not stay in place. i literally just got these today and out of the box it was like that. im incredibly dissapointed because theres no way im taking this all apart just to go back to 2 pedals. assistance ASAP would be appreciated because support on the website is bad

[@saouke]

you put it on upside down

[@matteostaffa9300]

Would I have to update the wheelbase again once my loadcell arrives or can I just swap and play right away?

[@DomB_Fanatec]

It should work, but we always recommend keeping firmware up to date.

[@cillafer7952]

Why is the load cell kit discontinued

[@farmboyfanGaming]

Where can i buy replacement rubbers?

[@DomB_Fanatec]

Please create a support ticket via the My Products section of your Fanatec account. The support team will assist you.

[@masons_wrld]

my csl elite doesn't act like a loadcell after trying to use fanalab. help?

[@DickVanPaiton]

Re-adjust the BRF setting in the Tuning Menu or in Fanalab - that should be it.

[@masons_wrld]

@@DickVanPaiton I did that, it acts like a pentiometer pedal, it's not using pressure it's using how far the pedal is traveling and it's a loadcell.

[@matteostaffa9300]

@@DickVanPaiton did you swap the electronics at the bottom?

[@11puig]

Nice teaser for what is coming for BlackFriday. Like if you see a 15% off for the combo CSL Elite Pedals + LC coming on BF!

[@Fanatec_Official]

Rumors!

[@justkris6461]

How can i order spare elastomer springs from fanatec? My springs are starting to get worn out

[@rledur]

Been looking for months now. No success. Seems that Fanatec does not have a kit in its product line. Hard to conceive.

[@colinkelleher1691]

I wish I could afford anything fanatec

[@BTouch454]

Don't know where you live, but the bundle is 600 dollars. I bought the G29 for 200 like 3 years ago, but last I checked they were around the same price.

[@lars_geurts45]

I lost the little rubber inside the end ring. What can i do?

[@DomB_Fanatec]

Please create a support ticket via the My Products section of your Fanatec account. The support team will assist you.

[@lars_geurts45]

@@DomB_Fanatec thx

[@isaacbenzaquen2944]

Where can I find the bolts to attach them to the cockpit?

[@DomB_Fanatec]

Hi Isaac, mounting hardware is not supplied with the majority of sim racing equipment, because the manufacturer can't predict the thickness of the surface you plan to mount the device to.

[@SackyX]

I got the first like. Send me a pair. 😆

[@jirkadolezal8127]

👍👍👍👍👍👍👍👍👍👍👍👍

[@RonnieWilliams_]

how do you connect these to a console?

[@DomB_Fanatec]

They connect to the back of a Fanatec wheel base (RJ12 cable), and the wheel base connects to the console (USB cable). It's not possible to connect the pedals directly to a console (but is possible on PC).

[@MrIndie360]

@@DomB_Fanatec I have tried to connect this way but the pedals are not being detected. Double checked all connections.

[@DomB_Fanatec]

@@MrIndie360 Please contact support and explain the troubleshooting steps you have tried so far. They will be happy to help! You can either create a support ticket via the My Product section of your Fanatec account, or you can try the 'Live Chat' icon (when visible on the site).

[@JasonRenfrow]

Load cell on these is not very good

[@fpupesh]

now make a video to explain what to do so the pedals don't roll backwards when using load cell. poor design there... very poor.

[@DomB_Fanatec]

Hi Victor, as with all high performance pedals, this product was designed to be hard-mounted to a sim racing chassis or at least a 'wheel stand' or similar product. The effectiveness and realism of a load cell brake relies on the relatively high forces involved, so the pedals must be absolutely secure in order to use them to their full potential.

[@Michelsen3K]

poor design? you actually don't know how to use loadcells aren't you? you could slam your feet on those like an idiot. those pedals are rock solid high quality. mounted on a sim rim. obviously

[@fpupesh]

@@DomB_Fanatec You had load cell on the CSR Elite pedals which I also have and they didn't roll back, did they? Are you saying your products are only to be mounted on a rig and not used otherwise? You never mentioned that on the product page.

[@fpupesh]

@@Michelsen3K I probably used load cells before you even knew what that was so calm down a bit there. not everybody has a sim riM.

[@brodeur212]

@@fpupesh don’t buy if you can’t get them to fit. Its like buying a ferrari motor and cry because you can’t fit it into a toyota