Far-Driver Learning Board ( PART 2 ) Learn Mode - Throttle - EBS Brake Functions

DOWNLOAD Diagram of the Screen ( Patreon ) - www.patreon.com/posts/far-dri...
EV-Customs Website - ev-customs.com
Channel Support - www.paypal.com/paypalme/evcus...
Patreon - / evcustoms
Instagram - / ev_customs
Facebook - goo.gl/tu3Qdk
Music - Artlist album

[@joshuacaban3040]

Not going to lie thanks to you I got my bike to work I love the FarDriver so far

[@tech4fun477]

great learning from this channel...thank you for the tuts

[@tonystone3397]

Great stuff thanks for sharing.

[@EVCustoms]

My pleasure! Tony!

[@AzzasBuildsandadventures]

Dam thats a nice Lcd screen....love it!!

[@EVCustoms]

Yeap... now they have new version with touch screen.. i will bring some for test..😅

[@AzzasBuildsandadventures]

@@EVCustoms awsom looking forward to the video..I'm in the market for a new power upgrade.

[@a_10_nadindrawikrama17]

Thank you for sharing, are you willing to provide information about the LCD screen you are using?

[@sharmatechtalk]

Looking forward see Display range function wiring using CAN-BUS.

[@ivanherrera7171]

Do you make harness by any chance ? I am new at this and I’m trying to add a 72v 5000w hub motor to my kid Razor sx500 but I don’t know much about it ..

[@markmercado8860]

how can i put park mode on my 72360

[@semihelibol]

perfec

[@benmerretz7200]

Can you please share a link to this display??

[@TootEmCarMan]

I wonder if anyone might be able to help me out? I have a Cyclamatic PowerPlus e-bike that I got 2nd hand. The pedal assist is not working. It was working when I first got the bike but the PAS sensor went faulty. It was replaced by a bike shop but never worked. I opened up the electronics box on the bike to find it not connected and cannot figure out how to connect it. The bike also has a pedal assist on/off switch on the handlebars which is also disconnected. Any help would be cool! :)

[@500wattz]

Do you have a video showing how to wire 3 speed switch with fardriver?

[@EVCustoms]

Hi.. no yet..

[@Vmaxfodder]

Did you ever figure out park mode ?

[@angusmcgil]

hello could you please let us know the model number for the display we are having alot of trouble finding a supplier without a model number to go by thank you for your help Gus

[@angusmcgil]

i only found one place to buy the newer touch screen version from ,and no trustworthy supplier for the model you show ,please help your subscribers thank you

[@E-supermoto]

Can i just leave the programing chip plugged in at all times? Or do i need to plug it out after programing?

[@EVCustoms]

Hi.. of course you can leave it connected on the controller..

[@salviaaable]

hi, i got the ND72260 and i got no torqe or acceleration under 300 RPM what is that ? have done already auto learn, tired different low and high vol. settings but nothing helps....

[@EVCustoms]

Hi.. check for RPM limit, Gear rpm setungs

[@salviaaable]

@@EVCustoms thanks for your reply. i have curretly no display, and no 3 speed switsch connected. just 1 gear. yes maybe that is why i got basically no power from the start. have made multiple testrides and logs... even changed my hall throttle. and set the RPM values to 2000 nothing changed

[@hectorvargas5628]

do you know guy if fardrive controllers is compatible with brushless motors that are not from the QS brand?

[@EVCustoms]

My friend QS motors is just good (quality) brand of hub motors, it not kind of motors, with FarDriver is comparable any brushless motor

[@hectorvargas5628]

@@EVCustoms thank you so much dude 👍

[@digitalbilly]

nice video is there away to enable pedal assist (PAS) at the same time as having a hand throttle?

[@EVCustoms]

Hi.. on far driver controllers didn't exist PAS feature..

[@kyrows87]

Καλησπέρα! Έχω ένα ecooter e3 και θέλω να του αλλάξω το controler με ένα της fardriver, ποιο θα μου προτείνες? Keep up the good work 💪

[@EVCustoms]

Geia sou file mou.. file.theleis na valeis far driver controller se scooter? 😄😄 koita den sou sinistw kati tetio dioti ta fardrivers proorisonte kirios gia dynata oximata...

[@iliaspanagakos2975]

ποσα kw ειναι το σκουτερ σου? και ποσα βολτ?

[@kyrows87]

@@iliaspanagakos2975 Είναι Μαξ 7kw και έχει μπαταρία 64v

[@EVCustoms]

Ta vrikame Ilia.... egw yo perasa gia scooteraki ton 250W 😄😆

[@iliaspanagakos2975]

@@EVCustoms το όργανο από που το έχεις πάρει?

[@leokeywood7226]

I’m having trouble setting my FarDriver up don’t bind properly

[@EVCustoms]

What kind of trouble you have?

[@leokeywood7226]

@@EVCustomsI have managed to sort it it’s weird gotta connect to pc than to phone and it works and also where did u get the display

[@EVCustoms]

There is no any store for these screens, i bring them direct from China, where do you live?

[@leokeywood7226]

@@EVCustomsI’m in the uk south east

[@user-wp3zv4oz8d]

Where I can order escooter parts? Are there a good traders on Ali express?

[@antonypartali]

Γιάννη... Τα μοτέρ μας, του Xiaomi που έχεις επάνω μέχρι τα δικά μου 6.5 ινστες με 110 στατορα έχουν 30 μαγνήτες δηλαδή 15 pair poles!! Εσύ εδώ έχεις από το προηγούμενο αφημένο 30 pair poles... Αλλά δεν έχει κ το νούμερο 15!!! Τι να βάλω στο "pair poles"...??🤔 Σε κάνα 2 εβδομάδες θα έρθουν οι κοντρολερς μου..

[@EVCustoms]

Ela Antoni.. den katalava akrivos ti theleis na peis.... oti exoume diaforetika megethi moter me idia zeygi polon?

[@antonypartali]

@@EVCustoms όχι μαστορατζα μου.. Απλά πράγματα... Στο "pole pairs " Τα μοτέρ μου είναι 30 μαγνήτες άρα 15 ζεύγη... Όπως κ τα μοτέρ από τα Xiaomi!! Στο "pole pairs" του fardrive controller στο αρρ δεν έχει το νούμερο 15..... Έχει 14 κ 16..... Τι νούμερο θα βάλω?

[@EVCustoms]

An den exei epilogi 15 simenei preepi na valeis sinolo magniton, diladi 30..

[@antonypartali]

@@EVCustoms οπότε αυτό που θα γράφει θα είναι επί 2....?🤔 Δηλαδή η εφαρμογή θα λέει 200 Χιλ. Κ στο GPS θα είναι 100 Χιλ...?? Ένας Ρώσος που έβαλε ίδιο fardrivε με αυτό που παραγγειλα κ έχει ίδιο μοτέρ με μένα μου είπε ότι έβαλε το 14....🤷 Πριν λίγο με απάντησε...

[@EVCustoms]

I taxitita den paei panta me tous polous.. yparxei ena simio sto programma an thimamai kala prepei na grafei...speed signal, entometaksi twra pou to leme prepei na kanw ena video sxetika me ayto.. pou les prepei na to paikseis apo ekei... molis sindethw sto diko mou tha sou to diksw.. twra den exw kana oxuma konta mou..

[@don.s_a_l_v_a_t_o_r_e]

Connecting the brake with the yellow and black cable from the controller to the brake lever is nonsense, it doesn't work at all!! Because if you do it like that, regardless of whether it's cable brakes or hydraulic brakes with a brake sensor and two cables from the brake sensor to the brake lever and connect the 2 cables to the controller to gel and black, then the gas is blocked!! That doesn't work, what he's saying is full of nonsense!! You need Hall brakes on the controller, these are electronic brakes with 3 cables and then it works! But with two cables on the controller, for example if you plug in yellow and then black, then the gas is blocked and if you only remove 1 cable again, whether yellow or black, it doesn't matter, then the gas works again! Such nonsense!! I've tried this with 4 different controllers and it's the same everywhere! The gas is blocked and no longer works!!

[@EVCustoms]

My friend.. you have these problems because you need some lessons.. in these video at the first time when i brake from brake lever, it just disconnect the motor, after that i connect to the controller via smartphone and program it for EBS braking, so at second test if you see the motor breaking at regen mode.

[@jasminbuilder]

​@@EVCustoms hello EV, your channel is great, I've been watching it since the first day you started with electric scooters. But I have one question for you. But can you tell me where to turn on the speedometer on the screen. does it go to RX or TX

[@jasminbuilder]

To pluge in cabel to screan,from controlet ,that wod help me very much Thanks

[@christoslazaridis7128]

I suppose you have experience with various controllers, I have been riding a dt thunder 2 for a year, having a problem every other day... Long story short after I finally found some legit people to help cause I better not speak about the absolute thieves that is dualtron greece.. My problem is that the square waves controllers made by minimotors fail to regulate voltage at regen which means if I turn on ebs... Displays get burned voltage jumps to 90 volts while braking (battery is 72 volts with 84 peak/60 cut and config is 8p*20s) which leads me to the question, για να μη γαμησω τα νεκρα της κορεας βραδιατικα, do you have any suggestions on good square wave controllers around 60A cont, that can regulate regen voltage, I want square waves cause I'm kinda addicted to their sound and instant acceleration and I feel Im losing out on around several km per charge cycle cause of the regen I don't get, my battery guy who I fully trust told me to pretty much never use it with these controllers so I will be glad if you have a good brand of controllers in mind, I will ask my guys when the time comes of course which isnt soon sadly but one more opinion of someone like you who seem to be into this stuff will be helpful

[@EVCustoms]

Geia sou.. Christo send me your WhatsApp or Viber number.