Your video is still very relevant and reliable in 2023. Recently purchased 2023 BMW and could not program the garage door opener following owner’s manual. Searched several videos to no avail snd then I watched yours. It worked like a charm exactly as you described. YHSNK YOU!!
@FaRKle0079 Жыл бұрын
I'm glad it worked for you!
@southern9292 Жыл бұрын
2 years later & people still learning from your video!! TY
@sgabe92489 ай бұрын
Sat in my car reading the instructions which were not very clear. Thanks to this video it took me literally 2 minutes to re-program my car. Clear and simple instructions on this video are fantastic !!!! Thanks for this post..
@jasonpresley6903 жыл бұрын
I bought a BMW last week and have watched every video there is on programming my garage door to my car and this is the only video that worked. Thank you, thank you, thank you!!!
@awelenwaeze9242 жыл бұрын
Ditto! This guy is awesome
@drewstermalloy2 жыл бұрын
Just came here to say the same thing. I got it to work on the first try after watching this video. Thanks!!
@gunmetal56092 жыл бұрын
I bought a 2022 Supra and the other guy I watched sucked. Came to BMW lol to get it right
@Dat550go Жыл бұрын
you're lying.
@manujadesilva22 Жыл бұрын
Same here !
@Adrian-sw3nv4 ай бұрын
You’re the only one I could find with the correct procedure, thank you so much!!!
@deanwalker2403 Жыл бұрын
I just bought a new car and with the help of your video I was able to link the car to open the garage doors. Thank you for the video. It was perfect.
@tylerpugh94383 жыл бұрын
Great instruction. Where most fail is assuming the coding didn’t work and clear everything again. No. Code as a single code with the garage remote, and then if it doesn’t work because it is a rolling code, DON’T clear again... simply push the learn button on the motor, get back in the car, push the button you want to program 1, 2, 3. Then Done!
@brickerzag10 ай бұрын
Thank you for making this clear for the rolling codes. I watched a few videos before and they missed the step pushing the mirror button three times.
@willg6199 Жыл бұрын
Just bought a 2013 BMW 335 and this worked just as described in the video. I watched another video with I think a BMW salesperson explaining it and they said for rolling code to press the button twice, and that didn’t work. Had to press it three times as shown in this video. Thanks!
@bsomai112 жыл бұрын
Your guide was perfect. So many other guides didn’t explain in detail or step by step like you did. Watching the timing and lights explained was the most helpful!!
@michellerobinson45242 жыл бұрын
This was the best video to cover how to program my garage door. Tried it felt like 50x to program prior to your video
@thegrimmer3 жыл бұрын
I can't even tell what I did differently here, but your video is the only one that got mine to work. Thanks
@shortafinger12 ай бұрын
Thank you. The only guide that actually works and explains what exactly to do
@pegsaunders27672 жыл бұрын
Thank you! I could not make it work with the owners manual instructions but got it on the first try after watching your video!
@laurencalig53043 жыл бұрын
You were SO incredibly helpful. My husband had been trying to connect the garage door opener for two days. You made his 2020! Thank you!!!!
@tylercouture2163 жыл бұрын
You need to get rid of your husband lol
@donkelly35103 жыл бұрын
Thank you. Followed steps in the owners manual and watched about 5 other videos, including BMW's "official" one and still couldn't get it to work until watching this one. Well done!
@m00semanus4 ай бұрын
Your video was the only one that helped me successfully pair my garage door to my homelink unit. Thank you so much for posting. You have brought a lot of value to a lot of people.
@hollybarnes61777 ай бұрын
Thank you so much, I've tried tried everything I'm all videos and nothing worked, not even BMW gurus could help. Once I did exactly what you said it worked perfectly.
@FaRKle00797 ай бұрын
Glad it helped!
@gnystrom13Ай бұрын
You were the ONLY video that tole m how to clear the program and reprogram a single button. Thank you.
@mayaa033 жыл бұрын
Bought my first BMW week ago, slowly getting to know all features, your Video help me pair my garage door opener, it was the best teaching video out of all KZbin clips, thank you so very much!
@tmoran2833 жыл бұрын
Thank you Thank you. After trying all the wrong ways I found your video and it worked perfectly!!!!! YOU NAILED IT!!!!
@edgy1rocks3 жыл бұрын
This is a better overview than anything else I've seen. Thanks for putting this up in clear text!
@mikeray78lovee2 жыл бұрын
000
@ji3g4j6jo3p5 ай бұрын
The user manual for my car (F22) has different instructions which are not applicable to the mirror I have (green LED instead of orange, hold button for 3 sec instead of pressing 3 times, etc.) Your instructions saved me. Thanks a lot!
@dellanno313 жыл бұрын
I had a 2016 228i BMW that I never was able to program. I decided to give it another try using this video for my 2020 340I xDrive and it finally worked. Thanks.
@XxS1l3nTxa1Mx3 жыл бұрын
Yeah my 2016 isn’t working now
@patodan16413 жыл бұрын
Thank you!! As others describe below your video covers the full programming sequence and explains it well with exact instructions. BMW needs to hire you to write their manual.
@SpanishGold12327 күн бұрын
Right when I was about to give up I hit the button one more time and it worked! I've been trying to connect this car to the opener for 5 years. Lol 🎉thank you
@nickg32353 жыл бұрын
Worked perfectly! Tried 2 other methods that didn't work. Thanks for the great video!
@bobandrus69093 жыл бұрын
This was very helpful 🙂
@randallseltzer69293 жыл бұрын
You made it clear in 2 minutes, what 5 other videos did not.
@satishmekerira70843 жыл бұрын
Thanks for the simple explanation and explaining both scenarios in one video!
@TheNicholasCaprio3 жыл бұрын
Thank you sir this has been the easiest tutorial and I programmed my garage door
@stevec.9663 Жыл бұрын
Worked perfectly for my 2023 430xi. So much clearer than the BMW manual. Thanks!
@CopyCatCorey27905 ай бұрын
Your video is the only that worked for me. I set aside hours to get this figured out, and I got it in 5 mins!!!
@FaRKle00795 ай бұрын
Glad it helped!
@ravindonald49272 жыл бұрын
I’ve seen many. This one is one of the best - still applicable to my 2022 BMW! Thank you.
@tanyatroupe9 ай бұрын
Very helpful! Step 1) Pair to car-remote with original garage opener 2) use LEARN on garage opener to complete the next step
@Fonger53 жыл бұрын
You the man. Best video for this stuff I’ve ever seen. You are right. Always confusing and never explains the most common scenario.
@PricklyPearAC3 жыл бұрын
Excellent video. Finally someone who explained how to program rolling code easily!
@rrryder Жыл бұрын
Thank you so much. Works like a charm. Only thing was I had to start the engine to get the homelink buttons on my BMW to flash the lights but otherwise followed the instructions to a tee.
@JahCm Жыл бұрын
He said to first start the car.
@TayoKM Жыл бұрын
Man thank you! This was the only guide that actually worked for me!!
@sgreene0523Ай бұрын
Thanks a lot! Like most people said, I too watched like several videos even BMW employees and your video got it to work!
@jeffsmoger8443 Жыл бұрын
Send this to anybody with a 2023 suburban… Worked like a charm when the others didn’t… thx.
@andrewthompson68932 жыл бұрын
I had trouble with this the first time around, so I was lamenting doing it again. I came here because all your videos are so fantastic, but this one didn't work for me because I don't have a rolling code. I found this out after having pressed the learning button and upon pressing the button on the mirror it didn't blink FAST, but had a slow blink on all 3 presses. This is the clue. If this happens, there is no rolling code. Keep making awesome videos sir!
@kennethl86262 жыл бұрын
This was the most helpful video after watching multiple videos. Thanks!
@GenericAccountVLR3 жыл бұрын
THANK YOU!!!!!!!!!!!! FINALLY someone with accurate, non-cluttered instructions.
@FaRKle00793 жыл бұрын
Glad it worked for you and your other vehicles!
@1896Dune Жыл бұрын
This is the best bmw program video out there. Great job!!!
@omarmalik1797 Жыл бұрын
The most precise and informative video. 🙏
@josephallen32533 жыл бұрын
Best video for programming the BMW remote out there. Thank you for posting.
@10tech1503 жыл бұрын
Best video on rolling codes and single clear option
@Great_America2 жыл бұрын
My 2019 BMW was able to auto learn the rolling code on the first try without having to access the panel on the garage door motor housing. Awesome 👍🏻
@bayusuharso2 жыл бұрын
Thanks dude! It works on my F25 after 10 times trying and realized that the ignition will turn off automatically after a minute. So better turn it on again for the 2nd procedure (rolling code).
@pedrocervantes96783 жыл бұрын
Thank you!!!! Better than “BMW’s genius” step by step guide.
@Mr.Looooong3 жыл бұрын
You are the only video that I've seen about this! Thanks for this helpful video!💛
@g8r1253 жыл бұрын
This video was GREAT! It showed me how to program my new garage door opener in my bmw...
@markmorgan80093 жыл бұрын
Thank you!!!! Could not figure this out when reading manual.
@SomeCoder Жыл бұрын
This was the best video on this. It does seem to help to do both the non-rolling remote method then the learn method. It also took awhile for the homelink system in car to be trained by the remote. For some reason, I could only train button 2 and not button 1. Perhaps I need to reset the homelink again and button 1 would work, just going to live with button 2 for now.
@chriseubanks23303 жыл бұрын
Awesome presentation sir! Better than the BMW AND home link videos
@bbbrobo3 жыл бұрын
That worked! Only pushed mine twice and it worked on the third time. Rolling codes on mine too.
@killakev4083 жыл бұрын
Thanks for this video! Like you said there’s many videos like this but yours is the most succinct. Very thoroughly explained. Cheers!
@NHILLproductions2 жыл бұрын
Thanks!!! You’re tutorial is spot on. My Homelink is now operational!
@doug91943 жыл бұрын
Thank you!! Much needed after the confusing instructions in the manual!
@carrrieon3 жыл бұрын
Omg this is the only one video helped solving all my issues and answered my questions!!!!! Thank you so much!
@jenbednarek70603 жыл бұрын
Very helpful. It’s finally working!! Thank you!
@Thetriofplanes2 жыл бұрын
Okay, I thought my car was broken but you just fixed it. Thank you 😊
@jamesm91702 жыл бұрын
👍 covered all the various scenarios with no fluff.
@steveanderson19262 жыл бұрын
Thanks for your straightforward, spot-on explanation. Perfect!
@danielvipperman12392 жыл бұрын
Good job showing rolling code! So simple when see like this!
@igorstarovoitov_3 жыл бұрын
The only video that really helped to set it up. Finally! Thanks a lot!
@FaRKle00793 жыл бұрын
Glad it worked for you!
@hm2rx Жыл бұрын
Best video out of the others showing. Thank you!
@Cridkid19772 жыл бұрын
Thank you! I just brought a new house and this was very helpful!!! Many thanks!
@FaRKle00792 жыл бұрын
Congrats on the new house!
@patrickstone59043 ай бұрын
This is the best video, but you need to do both processes for the rolling code
@jayduf90543 жыл бұрын
Best video for this issue , I just set mine up and I’m so happy , thank you sir 👏
@spiceycognac2 жыл бұрын
Thank you so much. The owners manual had me cross eyed . My hero .. now can you help me program my seats? Lol
@jong56407 ай бұрын
Tutorial worked like a charm. Thank you!
@DorianMdbs7 ай бұрын
Yeah idk, I’m either stupid or something but mine still doesn’t want to work
@michelejackson7543 жыл бұрын
Short and sweet! Couldn’t get mine to work per the manual...until I watched your video. Press the button 3x was sooooo helpful! Thank you!
@ericmills74018 ай бұрын
Best garage door opener video. Thank you
@NinexXo97 ай бұрын
Thank you so much. I just subscribed so I don't miss out on the knowledge.
@jakegante3 жыл бұрын
Thank you so much! I just bought my M2 competition and this worked perfectly for it!
@FaRKle00793 жыл бұрын
Congrats on the new ride! M2C crew!
@es35020123 жыл бұрын
You’re awesome! This helped and it worked on a opener from the early 2000s. First hold the controller and the home link button, then hit learn, then hit home link button three times. The light from the opener should blink and it’s learnt! Thanks again!
@t3drill Жыл бұрын
Great video - I managed to program my garage door in just two or three minutes. Thanks
@siddiky2 жыл бұрын
Thank you! This is exactly what I was looking for!
@Epicure_Voyage9 ай бұрын
It worked on my 2024 X5. Thank you sir!
@jayslupesky3 жыл бұрын
Thank you. That's exactly what I needed.
@atharvab.33422 жыл бұрын
Thank you this was very easy to follow along ! 👍🏼
@nelsonenglish73503 жыл бұрын
Thank you! Been trying to figure this out for a few days now, so much more convenient!
@johnkash70922 жыл бұрын
This works mostly, but on my 2019 435I, as stated in the owner's manual, you must hold the desired button for 3 seconds in the final step. If the garage doors moves, you are done. You may have to press it up to 3 times, but each time it must be held for at least 3 seconds.
@danestra Жыл бұрын
Agreed, I discovered the same by accident.
@kiraquekas8074 Жыл бұрын
You should teach a class on how to make a helpful KZbin video! Excellent. Perfect! Right on target! Thank you!
@Clipper_Raider2 жыл бұрын
Thank you so much. This was the only video that worked for me. 😎
@justinclark67622 жыл бұрын
You’re awesome. Thanks for a real video.
@mykhaelsmith87182 жыл бұрын
You’re the best!! Thank you so much.
@amadomedina61283 жыл бұрын
Thank you. Finally did it.
@taniaghosh1903 жыл бұрын
Thank you so much, I was struggling to figure how it works, your video solved the problem.
@dblr30002 жыл бұрын
New to BMW as of last night. 2015 428i. Thanks bud! Happy Thanksgiving!
@FaRKle00792 жыл бұрын
Congrats on the new ride! Have a happy Thanksgiving too!
@rnm54293 жыл бұрын
Thank you for this video. I was able to program the garage opener in just a few minutes ❤
@ST5S53 жыл бұрын
Thanks this worked perfectly for me!
@TheTruthnothingbutthetuth2 жыл бұрын
Finally, someone that knows what their talking about. My garage does not have the rolling code which was the issue. Thank you it’s working now and I smashed the like button
@minpyoseo34443 жыл бұрын
Thank you so much! I was able to program my pop's car today because of your video. ;)
@DavidTeerTheBackyardUfologist Жыл бұрын
It doesn't work for me. I've done everything. Rolling code. but I can program the remote and it will work. I go though all steps for rearview mirror Home Link and tried it even ways I came up with. No Joy. It an old 303MZ Wayne Dalton Garage door motor and Toyota probably don't work on 303Mhz. Home link seems to communicate with the 303mhz remote it does all flashes slow and fast. I get the learning button on and push it twice to make it flash too go to car and still will not work. The buttons on the home link to push the door open and close are not lighting up but they never have. Yes I have erased everything according to the owners manual. I am still thinking its the 303Mhz. Its old 1997 technology! If you have any suggestions I would appreciate it! I am in the USA BTW... I think Canada is different?